Image shown is a representation only. Exact specifications should be obtained from the product data sheet.

SP3232EBCN-L/TR

Manufacturer

Exar
Manufacturer's Part Number

SP3232EBCN-L/TR
Description

LINE TRANSCEIVER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 16; Package Code: SOP; Package Shape: RECTANGULAR;
Datasheet

Datasheet

Not In Stock

Popular Products

LL4148

Silicon Standard

RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;

Details

BSS138-7-F

SPC TECHNOLOGY/ MULTICOMP

N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain Current (ID): .2 A; Minimum DS Breakdown Voltage: 50 V; Operating Mode: ENHANCEMENT MODE;

Details

1N4148WT

Good-ark Electronics

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

2N2222A

Texas Instruments

2N2222A by Texas Instruments is a small signal NPN bipolar junction transistor (BJT) with a max collector-emitter voltage of 40V and a max collector current of 0.8A. It is commonly used for switching applications due to its fast turn on/off times (35ns/285ns) and high transition frequency (300MHz).

Details

ULN2803ADW

Texas Instruments

ULN2803ADW by Texas Instruments is a peripheral driver with 8 functions, open-collector output characteristics, and built-in transient protections. It operates b/w -40 to 85 °C and has a max supply voltage of 3 V. Ideal for applications requiring buffer or inverter-based peripheral drivers with sink current flow direction.

Details

CRGCQ0805F10R

TE Connectivity

TE Connectivity's CRGCQ0805F10R is a 10 ohm fixed resistor with 1% tolerance and 400 ppm/°C temperature coefficient. It is a surface mount thick film resistor in an 0805 package, suitable for applications requiring precise resistance values in compact electronic circuits.

Details

0460-202-16141

TE Connectivity

TE Connectivity's 0460-202-16141 contact features a crimp terminal type, machined contact design, and rated AC voltage of 1500V. With a wire gauge range of 20-16 AWG, it is ideal for applications requiring a male round pin-socket contact style in assembly products.

Details

2N2222A

Boca Semiconductor

NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;

Details

PIC18F4550T-I/PT

Microchip Technology

The Microchip Technology PIC18F4550T-I/PT microcontroller operates at a max clock frequency of 48 MHz with 8-bit architecture. It features 13-Ch 10-Bit ADC channels and USB connectivity, making it suitable for industrial applications requiring high-speed data processing and analog-to-digital conversion. With low power mode and flash ROM programmability, this device offers efficient performance in compact designs.

Details

LL4148

Onsemi

RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;

Details

CRG0805F10K

Tyco Electronics Components

FIXED RESISTOR; Mounting Type: SURFACE MOUNT; Resistance: 10000 ohm; Rated Power Dissipation (P): .125 W; Maximum Operating Temperature: 125 Cel; Tolerance: 1 %;

Details

RC0805FR-0710KL

Yageo

Yageo's RC0805FR-0710KL is a 10000 ohm SMT fixed resistor with 1% tolerance and 0.125 W power dissipation. Ideal for applications requiring resistance to operate b/w -55°C to 155°C, such as in automotive electronics or industrial control systems. Features metal glaze/thick film technology and matte tin finish with nickel barrier.

Details

MBR0520LT1

Onsemi

MBR0520LT1 by Onsemi is a Schottky rectifier diode with a max forward voltage of 0.385V and output current of 0.5A. It operates b/w -65°C to 125°C, making it suitable for applications requiring low power consumption in compact electronic devices. This single-configured diode is surface mountable and has a max repetitive peak reverse voltage of 20V, ideal for small outline package designs.

Details

LM317T

Sgs-ates Componenti Electronici S P A

Other Regulators; No. of Terminals: 3; JESD-609 Code: e0; Terminal Position: SINGLE; Adjustability: ADJUSTABLE; Maximum Load Regulation (%): 1.5 %;

Details

LL4148

Surge Components

RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;

Details

SMBJ18CA

Forward International Electronics

TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Nominal Breakdown Voltage: 21.05 V; Maximum Clamping Voltage: 29.2 V; Maximum Repetitive Peak Reverse Voltage: 18 V; Polarity: BIDIRECTIONAL;

Details

LM317AEMP/NOPB

National Semiconductor

ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: SOP; Terminal Form: GULL WING; Qualification Status: Not Qualified; Width: 3.56 mm;

Details

BSS138

Panjit International

N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain-Source On Resistance: 3 ohm; Minimum DS Breakdown Voltage: 50 V; Terminal Form: GULL WING;

Details

BSS138

General Semiconductor

N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Minimum DS Breakdown Voltage: 50 V; Qualification: Not Qualified;

Details

MMBT2907ALT1G

Onsemi

MMBT2907ALT1G by Onsemi is a PNP BJT transistor with 100 min hFE, 60V VCEO, and 200MHz fT. Ideal for switching applications, it has a small outline package with Gull Wing terminals and can handle up to 0.6A of collector current.

Details

SP3232EBCN-L/TR Technical Details

TYPE	DESCRIPTION
Minimum Supply Voltage:	3 V
Package Body Material:	PLASTIC/EPOXY
Nominal Supply Voltage:	3.3 V
Maximum Seated Height:	1.75 mm
Minimum Out Swing:	10 V
Sub-Category:	Line Driver or Receivers
Surface Mount:	YES
Maximum Supply Current:	1 mA
Terminal Finish:	MATTE TIN
No. of Terminals:	16
Terminal Position:	DUAL
Package Style (Meter):	SMALL OUTLINE
JESD-30 Code:	R-PDSO-G16
Package Shape:	RECTANGULAR
Terminal Form:	GULL WING
Maximum Operating Temperature:	70 Cel
Package Code:	SOP
Interface Standard:	EIA-232-F; TIA-232-F; V.24; V.28
Interface IC Type:	LINE TRANSCEIVER
Width:	3.9 mm
Maximum Output Low Current:	1.6 Amp
Moisture Sensitivity Level (MSL):	2
Input Characteristics:	SCHMITT TRIGGER
Driver No. of Bits:	2
Maximum Supply Voltage:	5.5 V
Differential Output:	NO
JESD-609 Code:	e3
Minimum Operating Temperature:	0 Cel
No. of Functions:	2
Qualification:	Not Qualified
Package Equivalence Code:	SOP16,.25
Receiver No. of Bits:	2
Length:	9.9 mm
Maximum Receive Delay:	0 ns
Peak Reflow Temperature (C):	260
Terminal Pitch:	1.27 mm
Temperature Grade:	COMMERCIAL
Power Supplies (V):	3.3/5

Category Top Products

MAX3485ESA+

Maxim Integrated

LINE TRANSCEIVER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;

LTC485CS8#PBF

Linear Technology

LINE TRANSCEIVER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;

MAX3072EESA

Maxim Integrated

MAX3072EESA by Maxim Integrated is a Line Driver & Receiver with 3.3V supply, 1A output current, and BICMOS technology. It supports EIA-422, EIA-485, TIA-485 interfaces for industrial applications requiring differential Schmitt trigger inputs and dual terminal position in a small outline package.

ADM1485ARZ-REEL7

Analog Devices

ADM1485ARZ-REEL7 by Analog Devices is a BICMOS Line Transceiver with EIA-422 and EIA-485 interface standards. It operates at 5V, has a max supply voltage of 5.25V, and can handle industrial temperature grades. Ideal for applications requiring differential Schmitt trigger input characteristics in communication systems.

MAX232EEPE+

Analog Devices

MAX232EEPE+ by Analog Devices is a Line Driver & Receiver with 2 functions, operating at 5V. It has a max supply voltage of 5.5V and operates in industrial temperature range (-40 to 85°C). Ideal for EIA-232-E, TIA-232-E, V.28 interfaces in various applications requiring inverted output polarity and Schmitt trigger input characteristics.

LTC2862ACS8-2#PBF

Linear Technology

LINE TRANSCEIVER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;

SN65LVDS4RSET

Texas Instruments

LINE RECEIVER; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 10; Package Code: VQCCN; Package Shape: RECTANGULAR;

STR485LVQT

STMicroelectronics

LINE TRANSCEIVER; Maximum Time At Peak Reflow Temperature (s): NOT SPECIFIED; Peak Reflow Temperature (C): NOT SPECIFIED;

MAX3243EIPWRG4

Texas Instruments

LINE TRANSCEIVER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 28; Package Code: TSSOP; Package Shape: RECTANGULAR;

MAX3232ECPE+

Maxim Integrated

LINE TRANSCEIVER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 16; Package Code: DIP; Package Shape: RECTANGULAR;

MAX485EESA+

Maxim Integrated

LINE TRANSCEIVER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;

DS26LV32ATM/NOPB

National Semiconductor

LINE RECEIVER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 16; Package Code: SOP; Package Shape: RECTANGULAR;

SN65HVD1781D

Texas Instruments

SN65HVD1781D by Texas Instruments is a line driver/receiver with 8 terminals and operates on 3.15-5.5V supplies. It features differential output, EIA-485-A interface standard, and -40 to 125°C temperature range. Ideal for automotive applications requiring fast data transmission with low power consumption.

MAX3485ECSA+

Maxim Integrated

LINE TRANSCEIVER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;

ISO1412DW

Texas Instruments

ISO1412DW by Texas Instruments is a line driver/receiver with 16 terminals, operating at -40 to 125°C. It features EIA-485-A and EIA-422 interface standards, with differential output and Schmitt trigger input characteristics. Ideal for automotive applications due to its small outline package and nickel palladium gold terminal finish.

SN65HVD78DRBT

Texas Instruments

SN65HVD78DRBT by Texas Instruments is a line driver/receiver with 3.6V max supply voltage, 15ns max transmit delay, and -40 to 125°C operating temperature range. Ideal for automotive applications, it features EIA-422/EIA-485 interface standards and differential output for robust communication in harsh environments.

DS26C32ATM/NOPB

National Semiconductor

LINE RECEIVER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 16; Package Code: SOP; Package Shape: RECTANGULAR;

HI-8585PSIF

Holt Integrated Circuits

HI-8585PSIF by Holt Integrated Circuits is a CMOS line driver with ARINC 429 interface. It operates at -40 to 85 °C, with supply voltage of +-12/+-15 V. Ideal for industrial applications requiring standard input characteristics and zero receive delay.

MAX3430ESA+

Analog Devices

MAX3430ESA+ by Analog Devices is a BICMOS line transceiver with EIA-422, EIA-485, TIA-485 interface standards. It operates at 3.3V with 1500ns max transmit delay and 120ns max receive delay. Ideal for industrial applications requiring differential output and Schmitt trigger input characteristics.

ADM1485ARZ

Analog Devices

ADM1485ARZ by Analog Devices is a BICMOS Line Transceiver with EIA-422 and EIA-485 interface standards. It operates at 5V, has 8 terminals, and offers differential outputs. Ideal for industrial applications requiring reliable communication over short distances with low power consumption.