Image shown is a representation only. Exact specifications should be obtained from the product data sheet.

SN65HVD78DRBT

Manufacturer

Texas Instruments
Manufacturer's Part Number

SN65HVD78DRBT
Description

LINE TRANSCEIVER; Temperature Grade: AUTOMOTIVE; Terminal Form: NO LEAD; No. of Terminals: 8; Package Code: HVSON; Package Shape: SQUARE;
Datasheet

Datasheet

Not In Stock

Popular Products

2N7002

Calogic

N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Peak Reflow Temperature (C): NOT SPECIFIED; Terminal Position: DUAL;

Details

LL4148

Sensitron Semiconductor

RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;

Details

ULN2803A

Motorola

NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; Terminal Position: DUAL; JESD-30 Code: R-PDIP-T18;

Details

LM317T

Inchange Semiconductor

Other Regulators; No. of Terminals: 3; Surface Mount: NO; Technology: BIPOLAR; Minimum Output Voltage-1: 1.2 V; No. of Outputs: 1;

Details

LM7805CT

Fairchild Semiconductor

FIXED POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: TO-220; Terminal Form: THROUGH-HOLE; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 5 %;

Details

1N4148

Diodes Incorporated

RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;

Details

LM358MX

Texas Instruments

LM358MX by Texas Instruments is a dual operational amplifier with a max input offset voltage of 9000 uV. It has a nominal voltage of 5V and a min voltage gain of 15000. This op amp is commonly used in applications requiring amplification and signal conditioning.

Details

1N4148

Capar Components

RECTIFIER DIODE; Surface Mount: NO; No. of Phases: 1; Maximum Forward Voltage (VF): 1 V; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Output Current: .15 A;

Details

2N7002

Silicon Standard

N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): .225 W; Maximum Drain-Source On Resistance: 7.5 ohm; Transistor Element Material: SILICON;

Details

CRCW04020000Z0EDHP

Vishay Intertechnology

Vishay Intertechnology's CRCW04020000Z0EDHP is a 0402 SMT resistor with 0 ohm resistance, rated for temperatures from -55°C to 155°C. Ideal for jumper applications in automotive electronics due to AEC-Q200 compliance and compact size of 1mm x 0.5mm x 0.3mm.

Details

BSS138BKW,115

Nexperia

N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Terminal Finish: TIN; No. of Terminals: 3; Additional Features: LOGIC LEVEL COMPATIBLE;

Details

2N7002

Vishay Intertechnology

2N7002 by Vishay Intertechnology is a N-CHANNEL FET with 60V DS Breakdown Voltage, 0.115A Drain Current, and 7.5 ohm On Resistance. Ideal for SWITCHING applications due to its SINGLE configuration with BUILT-IN DIODE. Operates in ENHANCEMENT MODE, suitable for surface mount with GULL WING terminals.

Details

MBR0530T1G

Onsemi

MBR0530T1G by Onsemi is a Schottky rectifier diode with a max forward voltage of 0.375V and output current of 0.5A. It operates b/w -65°C to 125°C, making it suitable for applications requiring high-speed switching in compact electronic devices like smartphones and tablets. The package style is small outline with gull wing terminals for surface mount assembly.

Details

RN41N-I/RM

Microchip Technology

Microchip Technology's RN41N-I/RM is a telecom IC with 35 terminals, operating from -40 to 85°C. It has a supply voltage of 3.3V and is surface mountable in industrial applications. The package style is rectangular, measuring 13.2mm x 20.1mm with a seated height of 2.2mm, suitable for telecom interface functions.

Details

1N4148

International Components

RECTIFIER DIODE; Surface Mount: NO; No. of Elements: 1; Terminal Finish: Tin/Lead (Sn/Pb); JESD-609 Code: e0; Maximum Reverse Recovery Time: .004 us;

Details

MMBF170LT1G

Onsemi

MMBF170LT1G by Onsemi is a N-CHANNEL FET with 60V DS Breakdown Voltage and 0.5A Drain Current. Ideal for SWITCHING applications, it operates in ENHANCEMENT MODE with a max power dissipation of 0.225W. This small outline transistor has a temperature range from -55 to 150 °C.

Details

BSS123,215

Nexperia

N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Moisture Sensitivity Level (MSL): 1; No. of Terminals: 3; Maximum Time At Peak Reflow Temperature (s): 30;

Details

1N4148

Weitronic Enterprise

RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;

Details

2N7002

Fairchild Semiconductor

N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Maximum Time At Peak Reflow Temperature (s): 30; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR;

Details

MMBT2222ALT1G

Rochester Electronics

NPN; Configuration: SINGLE; Surface Mount: YES; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .3 W; Maximum Collector Current (IC): .6 A;

Details

SN65HVD78DRBT Technical Details

TYPE	DESCRIPTION
Minimum Supply Voltage:	3 V
Package Body Material:	PLASTIC/EPOXY
Minimum Supply Voltage-1:	3 V
Nominal Supply Voltage:	3.3 V
Output Characteristics:	DIFFERENTIAL
Maximum Time At Peak Reflow Temperature (s):	NOT SPECIFIED
Maximum Seated Height:	1 mm
Minimum Out Swing:	1.5 V
Sub-Category:	Line Driver or Receivers
Surface Mount:	YES
Maximum Supply Current:	.95 mA
Terminal Finish:	Nickel/Palladium/Gold (Ni/Pd/Au)
No. of Terminals:	8
Terminal Position:	DUAL
Package Style (Meter):	SMALL OUTLINE, HEAT SINK/SLUG, VERY THIN PROFILE
JESD-30 Code:	S-PDSO-N8
Package Shape:	SQUARE
Terminal Form:	NO LEAD
Maximum Operating Temperature:	125 Cel
Package Code:	HVSON
Interface Standard:	EIA-422; EIA-485
Interface IC Type:	LINE TRANSCEIVER
Width:	3 mm
Nominal Supply Voltage-1:	3.3 V
Maximum Supply Voltage-1:	3.6 V
Maximum Output Low Current:	8 Amp
Moisture Sensitivity Level (MSL):	2
Output Polarity:	COMPLEMENTARY
Input Characteristics:	DIFFERENTIAL SCHMITT TRIGGER
Driver No. of Bits:	1
Maximum Supply Voltage:	3.6 V
Differential Output:	YES
JESD-609 Code:	e4
Minimum Operating Temperature:	-40 Cel
No. of Functions:	1
Qualification:	Not Qualified
Maximum Transmit Delay:	15 ns
Package Equivalence Code:	SOLCC8,.12,25
Receiver No. of Bits:	1
Length:	3 mm
Maximum Receive Delay:	35 ns
Peak Reflow Temperature (C):	260
Terminal Pitch:	.65 mm
Temperature Grade:	AUTOMOTIVE
Power Supplies (V):	3.3

Category Top Products

MAX3485ECSA+T

Maxim Integrated

LINE TRANSCEIVER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;

MAX3221CAE+

Maxim Integrated

LINE TRANSCEIVER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 16; Package Code: SSOP; Package Shape: RECTANGULAR;

MAX232AEWE+

Analog Devices

MAX232AEWE+ by Analog Devices is a Line Driver & Receiver with 2 functions. It operates at 5V, has a max transmit delay of 3500ns, and supports EIA-232-E interface standard. Widely used in industrial applications for serial communication due to its CMOS technology and inverted output polarity.

LTC1387IG#PBF

Analog Devices

LTC1387IG#PBF by Analog Devices is a Line Transceiver with CMOS technology. It operates in industrial temperature range (-40 to 85 °C) and supports EIA-232, EIA-422, EIA-485, and EIA-562 interfaces. With differential output and Schmitt trigger input characteristics, it's ideal for applications requiring reliable data transmission over short distances.

MAX3232CSE-T

Maxim Integrated

MAX3232CSE-T by Maxim Integrated is a Line Driver & Receiver with 3.3/5V power supplies, operating from 0 to 70°C. It features EIA-232 and EIA-562 interface standards, totem-pole output characteristics, and Schmitt trigger input characteristics. Ideal for commercial applications requiring inverted output polarity and dual terminal position in a small outline package style.

SP3072EEN-L

Maxlinear

LINE TRANSCEIVER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;

SN65HVD70DGSR

Texas Instruments

SN65HVD70DGSR by Texas Instruments is a line driver/receiver with a supply voltage range of 3V to 3.6V, operating temperature from -40°C to 125°C, and EIA-485 interface standard. It features differential output, dual terminal position, and Schmitt trigger input characteristics. Ideal for automotive applications requiring reliable data transmission in harsh environments.

ADM2682EBRIZ

Analog Devices

ADM2682EBRIZ by Analog Devices is a Line Driver & Receiver with 16 terminals, operating at 3-5.5V. It offers EIA-485-A, TIA-485-A, EIA-422, ISO 8482 interface standards for industrial applications. Features include differential outputs, dual terminal position, and a max transmit delay of 100ns.

MAX232AESE+T

Maxim Integrated

LINE TRANSCEIVER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 16; Package Code: SOP; Package Shape: RECTANGULAR;

LTC1535ISW#TRPBF

Linear Technology

LINE TRANSCEIVER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 16; Package Code: SOP; Package Shape: RECTANGULAR;

MAX3485EESA+

Maxim Integrated

LINE TRANSCEIVER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;

SP3072EEN-L/TR

Sipex

LINE TRANSCEIVER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;

SP3072EEN-L

Exar

Exar SP3072EEN-L is a BICMOS line transceiver with EIA-422, EIA-485, TIA-485 interface standards. It operates at 3.3V with 1A max output low current and 1500ns transmit delay. Ideal for industrial applications requiring reliable differential signal transmission in harsh environments.

SP485EEN-L

Maxlinear

LINE TRANSCEIVER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;

MAX3232ECPE+

Analog Devices

MAX3232ECPE+ by Analog Devices is a Line Driver & Receiver with 16 terminals. It operates at 3-5.5V, has 2 functions, and uses BICMOS technology. Ideal for EIA-232, TIA-232, V.24, V.28 interfaces in commercial applications requiring high output current of 1.6A.

LTM2881MPY-3#PBF

Linear Technology

LINE TRANSCEIVER; Temperature Grade: OTHER; Terminal Form: BALL; No. of Terminals: 32; Package Code: BGA; Package Shape: RECTANGULAR;

MAX232EESE

Maxim Integrated

MAX232EESE by Maxim Integrated is a Line Driver & Receiver with 2 functions, operating at 5V. It features inverted output polarity, Schmitt trigger input characteristics, and EIA-232-E interface standard. Ideal for industrial applications requiring reliable communication over long distances.

LTC2855IDE#PBF

Analog Devices

LTC2855IDE#PBF by Analog Devices is an EIA-485-A/TIA-485-A line transceiver with differential output. It operates at a supply voltage range of 3V to 3.6V and has a max transmit delay of 50ns. Ideal for industrial applications requiring reliable communication over long distances.

MAX485EPA

Maxim Integrated

MAX485EPA by Maxim Integrated is a Line Driver & Receiver with 5V supply, 60ns max transmit delay, and 200ns max receive delay. Ideal for EIA-422/EIA-485 interfaces in industrial applications due to its CMOS technology and differential output.

ISO1410BDWR

Texas Instruments

ISO1410BDWR by Texas Instruments is a Line Driver & Receiver with 16 terminals, operating at -40 to 125 °C. It features EIA-485-A, TIA-485-A, and EIA-422 interface standards, with a max transmit delay of 570 ns. Ideal for automotive applications due to its small outline package and differential output capabilities.