Image shown is a representation only. Exact specifications should be obtained from the product data sheet.

SP335EER1-L/TR

Manufacturer

Maxlinear
Manufacturer's Part Number

SP335EER1-L/TR
Description

LINE TRANSCEIVER; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 32; Package Code: HVQCCN; Package Shape: SQUARE;
Datasheet

Datasheet

Not In Stock

Popular Products

CRG0805F10K

Tyco Electronics Components

FIXED RESISTOR; Mounting Type: SURFACE MOUNT; Resistance: 10000 ohm; Rated Power Dissipation (P): .125 W; Maximum Operating Temperature: 125 Cel; Tolerance: 1 %;

Details

NE555/D

General Electric Solid State

Analog Waveform Generation Functions; Temperature Grade: COMMERCIAL; Maximum Operating Temperature: 70 Cel; Technology: BIPOLAR; Package Equivalence Code: DIE OR CHIP; Qualification: Not Qualified;

Details

AT90CAN128-16AU

Atmel

MICROCONTROLLER, RISC; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 64; Package Code: TQFP; Package Shape: SQUARE;

Details

2N2222A

Infineon Technologies

NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;

Details

LM358MX

Texas Instruments

LM358MX by Texas Instruments is a dual operational amplifier with a max input offset voltage of 9000 uV. It has a nominal voltage of 5V and a min voltage gain of 15000. This op amp is commonly used in applications requiring amplification and signal conditioning.

Details

1N4148WS

Taitron Components

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

SS14

Panjit International

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

LM555CM

Renesas Electronics

Analog Waveform Generation Functions; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;

Details

2N2222A

Nte Electronics

NPN; Configuration: SINGLE; Surface Mount: NO; Maximum Power Dissipation (Abs): 1 W; Maximum Collector Current (IC): .8 A; Terminal Form: WIRE;

Details

LM358D-T

NXP Semiconductors

LM358D-T by NXP Semiconductors is a dual operational amplifier with 70dB CMRR, 1000kHz unity gain bandwidth, and 9000uV max input offset voltage. Widely used in commercial applications due to its small outline package and low bias current of 0.5uA.

Details

OPA2277UA/2K5E4

Texas Instruments

OPA2277UA/2K5E4 by Texas Instruments is a dual operational amplifier with low-offset and micropower features. It has a max input offset voltage of 100uV, nominal common mode reject ratio of 140dB, and min slew rate of 0.8V/us. Ideal for industrial applications requiring precise signal amplification in compact designs.

Details

1N4148WS

Continental Device India

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

2N7002

Fairchild Semiconductor

N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Maximum Time At Peak Reflow Temperature (s): 30; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR;

Details

1N4148

Sun Wai Electronic

RECTIFIER DIODE; Surface Mount: NO; Maximum Output Current: .15 A; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Reverse Recovery Time: .004 us; Maximum Repetitive Peak Reverse Voltage: 100 V;

Details

BSS138

Jiangsu Changjiang Electronics Technology

N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Package Style (Meter): SMALL OUTLINE; Maximum Drain Current (ID): .22 A; Package Shape: RECTANGULAR;

Details

2N7002,215

Nexperia

N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Time At Peak Reflow Temperature (s): 30; Transistor Application: SWITCHING; Package Body Material: PLASTIC/EPOXY;

Details

MS3V-T1R32.768KHZ+/-20PPM12.5PF

Golledge Electronics

MS3V-T1R32.768KHZ+/-20PPM12.5PF by Golledge Electronics is a crystal oscillator with 20 ppm frequency tolerance, 126% stability, and 12.5 pF load capacitance. It is ideal for applications requiring precise timing in temperature-sensitive environments due to its -40 to 85 °C operating range.

Details

LL4148

Diodes Incorporated

RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;

Details

LM555CMX

Texas Instruments

LM555CMX by Texas Instruments is an Analog Waveform Generation IC with 8 terminals. It operates at a nominal voltage of 5V and supports power supplies ranging from 5V to 15V. This versatile IC, housed in a small outline package, is commonly used for pulse and rectangular waveform generation in commercial temperature environments.

Details

CL10B104KB8NNNC

Samsung Electro-mechanics

CL10B104KB8NNNC by Samsung Electro-mechanics is a ceramic capacitor with capacitance of 0.1uF and rated DC voltage of 50V. It has a negative tolerance of 10% and temperature coefficient of 15ppm/°C, suitable for surface mount applications in various electronic devices. With dimensions of 1.6mm x 0.8mm x 0.9mm, it operates b/w -55 to 125 °C providing stable performance in compact designs.

Details

SP335EER1-L/TR Technical Details

TYPE	DESCRIPTION
Minimum Supply Voltage:	3 V
Package Body Material:	UNSPECIFIED
Nominal Supply Voltage:	3.3 V
Maximum Time At Peak Reflow Temperature (s):	30
Maximum Seated Height:	1 mm
Surface Mount:	YES
Terminal Finish:	Matte Tin (Sn)
No. of Terminals:	32
Terminal Position:	QUAD
Package Style (Meter):	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE
JESD-30 Code:	S-XQCC-N32
Package Shape:	SQUARE
Terminal Form:	NO LEAD
Maximum Operating Temperature:	85 Cel
Package Code:	HVQCCN
Interface Standard:	EIA-232; V.28
Interface IC Type:	LINE TRANSCEIVER
Width:	5 mm
Moisture Sensitivity Level (MSL):	2
Input Characteristics:	DIFFERENTIAL SCHMITT TRIGGER
Driver No. of Bits:	2
Maximum Supply Voltage:	5.5 V
Differential Output:	YES
JESD-609 Code:	e3
Minimum Operating Temperature:	-40 Cel
No. of Functions:	2
Maximum Transmit Delay:	1000 ns
Receiver No. of Bits:	2
Length:	5 mm
Maximum Receive Delay:	150 ns
Additional Features:	IT ALSO SUPPORTS 1 DRIVER, 1 RECEIVER WITH INTERFACE STANDARD RS-485/422
Peak Reflow Temperature (C):	260
Terminal Pitch:	.5 mm
Temperature Grade:	INDUSTRIAL

Category Top Products

LMH0387SLE/NOPB

National Semiconductor

LINE TRANSCEIVER; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 48; Package Code: VQCCN; Package Shape: SQUARE;

MAX3221EIPWRE4

Texas Instruments

MAX3221EIPWRE4 by Texas Instruments is a Line Driver & Receiver with 16 terminals, operating at 3.3/5V. It features a max supply voltage of 3.6V, Schmitt trigger input characteristics, and interface standards EIA-232-F; TIA-232-F; V.28. Ideal for industrial applications requiring reliable data transmission over short distances.

FIN1108MTD

Onsemi

FIN1108MTD by Onsemi is a Line Transceiver with 8-bit driver and receiver functions. It operates at a supply voltage range of 3-3.6V, with max transmit and receive delays of 1.75ns. This industrial-grade device in a small outline package is ideal for applications requiring high-speed differential signal transmission.

ISL3330IAZ-T7A

Renesas Electronics

LINE TRANSCEIVER; Terminal Finish: MATTE TIN; Moisture Sensitivity Level (MSL): 3; JESD-609 Code: e3;

MAX3160EEAP+T

Analog Devices

MAX3160EEAP+T by Analog Devices is a Line Driver & Receiver with 20 terminals, operating at 3-5.5V. It features a max transmit delay of 800ns and max output low current of 2.5A. Ideal for industrial applications requiring EIA-232, EIA-422, or EIA-485 interface standards in compact designs.

ISO1412DW

Texas Instruments

ISO1412DW by Texas Instruments is a line driver/receiver with 16 terminals, operating at -40 to 125°C. It features EIA-485-A and EIA-422 interface standards, with differential output and Schmitt trigger input characteristics. Ideal for automotive applications due to its small outline package and nickel palladium gold terminal finish.

LTC2872IUHF#PBF

Analog Devices

LTC2872IUHF#PBF by Analog Devices is a Line Driver & Receiver with 4 functions, operating at -40 to 85°C. It features EIA-232 and EIA-422 interface standards, SCHMITT TRIGGER input characteristics, and a CMOS technology. Ideal for industrial applications requiring reliable communication over short distances.

MAX3232EEAE

Maxim Integrated

MAX3232EEAE by Maxim Integrated is a Line Driver & Receiver with 16 terminals. It operates b/w -40 to 85°C, supporting supply voltages of 3.3/5V. Ideal for EIA-232, TIA-232, V.24, and V.28 interfaces in industrial applications due to its BICMOS technology and Schmitt trigger input characteristics.

DP83630SQ/NOPB

Texas Instruments

DP83630SQ/NOPB by Texas Instruments is a Line Transceiver with 48 terminals, operating at -40 to 85 °C. It features a 3.6V supply voltage, IEEE 1588 interface standard, and differential output for industrial applications requiring reliable communication over short distances.

ST3232BTR

STMicroelectronics

ST3232BTR by STMicroelectronics is a Line Driver & Receiver with 16 terminals, operating at 3-5.5V. It features CMOS technology, EIA-232 interface standard, and Schmitt trigger input characteristics. Ideal for industrial applications requiring reliable data transmission in temperature range of -40 to 85°C.

LTC2865IDE#PBF

Linear Technology

LINE TRANSCEIVER; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 12; Package Code: HVSON; Package Shape: RECTANGULAR;

SN65LVDS4RSER

Texas Instruments

SN65LVDS4RSER by Texas Instruments is a Line Receiver IC with 10 terminals, operating at -40 to 85°C. It features differential input/output with a max transmit delay of 3.3ns and operates on power supplies of 1.8/2.5V. Ideal for industrial applications requiring high-speed data transmission in compact spaces.

MAX232DRG4

Texas Instruments

MAX232DRG4 by Texas Instruments is a Line Driver & Receiver with 2 functions, operating at 5V. It has a small outline package style and operates b/w 0-70°C. Ideal for EIA-232-F, TIA-232-F, V.28 interfaces in commercial applications.

MAX3483EESA+T

Analog Devices

MAX3483EESA+T by Analog Devices is a line driver/receiver with 8 terminals, operating at 3-3.6V. It offers EIA-422/EIA-485 interface standards, differential output, and 1500ns max transmit delay. Ideal for industrial applications requiring reliable communication over short distances.

ST3485ECDR

STMicroelectronics

ST3485ECDR by STMicroelectronics is a Line Driver & Receiver with 3.3V power supply, EIA-422/EIA-485 interface standard, and 30ns max transmit delay. Ideal for commercial applications requiring differential output and Schmitt trigger input characteristics in a small outline package.

LMH0387SLE/NOPB

Texas Instruments

LMH0387SLE/NOPB by Texas Instruments is a Line Transceiver with 48 terminals, operating at -40 to 85°C. It features a differential output with complementary polarity and requires a supply voltage of 3.135-3.465V. Ideal for industrial applications requiring high-speed data transmission in compact spaces due to its small form factor and low power consumption.

SN65HVD72DGKR

Texas Instruments

SN65HVD72DGKR by Texas Instruments is a line driver with 3.6V max supply voltage, 1000ns max transmit delay, and 8 Amp max output low current. Ideal for automotive applications due to its EIA-422/EIA-485 interface standard and differential output feature.

ISL81387IAZ-T

Renesas Electronics

ISL81387IAZ-T by Renesas Electronics is a Line Driver & Receiver with 2 functions, operating voltage range of 4.5V to 5.5V, and max output low current of 3A. It is ideal for industrial applications requiring EIA-232, EIA-422, or EIA-485 interface standards in harsh environments with temperatures ranging from -40°C to 85°C.

ISL3178EIBZ-T

Intersil

LINE TRANSCEIVER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;

AD8138ARMZ

Analog Devices

AD8138ARMZ by Analog Devices is a line driver with 8 terminals, operating from -40 to 85 °C. It has a supply voltage range of 1.4V to 5.5V and offers differential output for industrial applications requiring high-speed signal transmission over short distances.