Image shown is a representation only. Exact specifications should be obtained from the product data sheet.

ST3232BTR

Manufacturer

STMicroelectronics
Manufacturer's Part Number

ST3232BTR
Description

LINE TRANSCEIVER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 16; Package Code: TSSOP; Package Shape: RECTANGULAR;
Datasheet

Datasheet

Not In Stock

Popular Products

BSS123,215

NXP Semiconductors

NXP Semiconductors' BSS123,215 is a N-CHANNEL FET for SWITCHING applications. Features include 100V DS Breakdown Voltage, 0.17A Drain Current, and 6 ohm On Resistance. With GULL WING terminals and ENHANCEMENT MODE operation, it's ideal for small outline packages in various electronic devices.

Details

SN65HVD230DR

Texas Instruments

SN65HVD230DR by Texas Instruments is a BICMOS technology interface circuit with 1Mbps data rate, suitable for industrial applications. It operates at 3.3V, has 8 terminals in a small outline package, and can withstand temperatures from -40 to 85°C.

Details

2N2222A

Digitron Semiconductors

NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;

Details

LL4148

Weitronic Enterprise

RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;

Details

2N2222A

General Diode

NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;

Details

2N7002-T1-E3

Vishay Intertechnology

Vishay Intertechnology's 2N7002-T1-E3 is a N-CHANNEL FET for SWITCHING applications. Features include 60V DS Breakdown Voltage, 0.115A Drain Current, and 7.5 ohm On Resistance. With ENHANCEMENT MODE operation, this GULL WING transistor is ideal for small outline surface mount designs up to 150°C.

Details

SS14

Yangzhou Yangjie Electronics

RECTIFIER DIODE; Surface Mount: YES; Technology: SCHOTTKY; No. of Phases: 1; Config: SINGLE; Maximum Operating Temperature: 125 Cel;

Details

MMBT3904LT1G

Onsemi

MMBT3904LT1G by Onsemi is a NPN BJT with max. collector-emitter voltage of 40V, hFE of 30, and fT of 300MHz. Ideal for small signal applications in electronics due to its compact size, high transition frequency, and low power dissipation capabilities.

Details

2N7002

Onsemi

N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Terminal Finish: Matte Tin (Sn) - annealed; Transistor Element Material: SILICON;

Details

2N7002-7-F

Diodes Incorporated

Diodes Inc. 2N7002-7-F is a N-channel FET with 60V DS breakdown voltage, 0.115A max drain current, and 13.5 ohm RDS(on). Ideal for switching applications in enhancement mode operation. Features Gull Wing terminals, small outline package style, and operates up to 150°C.

Details

1N4148WT

Taitron Components

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

M24308/2-1F

Cinch Connectivity Solutions

D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 1750VAC; No. of Connectors: ONE; Body Depth: .375 inch;

Details

LM555CMX

Texas Instruments

LM555CMX by Texas Instruments is an Analog Waveform Generation IC with 8 terminals. It operates at a nominal voltage of 5V and supports power supplies ranging from 5V to 15V. This versatile IC, housed in a small outline package, is commonly used for pulse and rectangular waveform generation in commercial temperature environments.

Details

1N4148

Synsemi

RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;

Details

BSS84-7-F

SPC TECHNOLOGY/ MULTICOMP

P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Package Shape: RECTANGULAR; Transistor Element Material: SILICON;

Details

LL4148

Diotec Semiconductor Ag

RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;

Details

DS18B20U+

Maxim Integrated

TEMPERATURE SENSOR,SWITCH/DIGITAL OUTPUT,SERIAL; Mounting Feature: SURFACE MOUNT; No. of Terminals: 8; Package Shape or Style: SQUARE; Housing: PLASTIC; Minimum Supply Voltage: 3 V;

Details

STM32H753IIT6

STMicroelectronics

STM32H753IIT6 by STMicroelectronics is a 32-bit microcontroller with 176 terminals, operating at up to 48 MHz. It features 20-Ch 16-Bit ADCs and 2-Ch 12-Bit DACs, suitable for industrial applications requiring high-speed data processing and connectivity via CAN, ETHERNET, USB, and more.

Details

USB2514BI-AEZG

Microchip Technology

USB2514BI-AEZG by Microchip is a BUS CONTROLLER IC with 36 terminals, operating at 3.3V, supporting I2C, SMBUS, and USB buses. It has a clock frequency of up to 24MHz and can withstand industrial temperatures from -40°C to 85°C. This chip carrier package is surface mountable and suitable for various applications requiring USB connectivity.

Details

43025-0400

Molex

The Molex 43025-0400 is a board connector with 4 contacts, 2 rows, and a mating contact pitch of 0.118". It has a body length of 0.27", insulation resistance of 1Gohm, and operates b/w -40 to 105°C. Ideal for commercial applications requiring a female connector with crimp termination and UL94V-0 flammability rating.

Details

ST3232BTR Technical Details

TYPE	DESCRIPTION
Minimum Supply Voltage:	3 V
Package Body Material:	PLASTIC/EPOXY
Nominal Supply Voltage:	3.3 V
Maximum Time At Peak Reflow Temperature (s):	30
Maximum Seated Height:	1.2 mm
Minimum Out Swing:	5 V
Sub-Category:	Line Driver or Receivers
Surface Mount:	YES
Maximum Supply Current:	1 mA
Terminal Finish:	MATTE TIN
No. of Terminals:	16
Terminal Position:	DUAL
Package Style (Meter):	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH
Technology:	CMOS
JESD-30 Code:	R-PDSO-G16
Package Shape:	RECTANGULAR
Terminal Form:	GULL WING
Maximum Operating Temperature:	85 Cel
Package Code:	TSSOP
Interface Standard:	EIA-232; TIA-232; V.24; V.28
Interface IC Type:	LINE TRANSCEIVER
Width:	4.4 mm
Maximum Output Low Current:	1.6 Amp
Moisture Sensitivity Level (MSL):	1
Input Characteristics:	SCHMITT TRIGGER
Driver No. of Bits:	2
Maximum Supply Voltage:	5.5 V
Differential Output:	NO
JESD-609 Code:	e3
Minimum Operating Temperature:	-40 Cel
No. of Functions:	2
Qualification:	Not Qualified
Package Equivalence Code:	TSSOP16,.25
Receiver No. of Bits:	2
Length:	5 mm
Maximum Receive Delay:	0 ns
Peak Reflow Temperature (C):	260
Terminal Pitch:	.65 mm
Temperature Grade:	INDUSTRIAL
Power Supplies (V):	3.3/5

Category Top Products

SP485EN-L

Exar

Exar's SP485EN-L is a BICMOS line transceiver with EIA-422 and EIA-485 interface standards. It operates at 5V, has a max supply voltage of 5.25V, and can withstand industrial temperatures from -40 to 85°C. Ideal for applications requiring differential output and Schmitt trigger input characteristics in compact designs.

MAX3160EAP+T

Maxim Integrated

LINE TRANSCEIVER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 20; Package Code: SSOP; Package Shape: RECTANGULAR;

ST3232CTR

STMicroelectronics

ST3232CTR by STMicroelectronics is a Line Driver & Receiver with 16 terminals, operating at 3-5.5V. It features dual functions, CMOS technology, and Schmitt trigger input characteristics. Ideal for EIA-232, TIA-232, V.24, and V.28 interfaces in commercial temperature grade applications.

SP3485EN-L/TR

Exar

Exar SP3485EN-L/TR is a BICMOS line transceiver with EIA-422/EIA-485 interface. It operates at 3.3V, has 8 terminals, and offers differential output. With a max transmit delay of 60ns, it's ideal for industrial applications requiring reliable communication over short distances.

ISL3173EIUZ-T

Intersil

LINE TRANSCEIVER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 10; Package Code: TSSOP; Package Shape: SQUARE;

MAX3232EIDWR

Texas Instruments

MAX3232EIDWR by Texas Instruments is a Line Driver & Receiver with 16 terminals. It operates at 3.3/5V, has a max supply voltage of 3.6V, and supports EIA-232-F interface standard. Ideal for industrial applications requiring inverted output polarity and Schmitt trigger input characteristics.

MAX232EPE

Rochester Electronics

LINE TRANSCEIVER; Temperature Grade: INDUSTRIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 16; Package Code: DIP; Package Shape: RECTANGULAR;

ISO1410BDW

Texas Instruments

ISO1410BDW by Texas Instruments is a line driver & receiver with 16 terminals, operating at -40 to 125 °C. It features a max supply voltage of 5.5 V and differential output for EIA-485-A, TIA-485-A, EIA-422 interfaces. Ideal for automotive applications due to its small outline package and Schmitt trigger input characteristics.

MAX22025AWA+

Analog Devices

LINE TRANSCEIVER; Maximum Time At Peak Reflow Temperature (s): 30; JESD-609 Code: e3; Peak Reflow Temperature (C): 260; Terminal Finish: Matte Tin (Sn) - annealed; Moisture Sensitivity Level (MSL): 3;

ISL3283EIHZ-T7A

Renesas Electronics

LINE RECEIVER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 6; Package Code: LSSOP; Package Shape: RECTANGULAR;

MAX202ECSE+T

Analog Devices

MAX202ECSE+T by Analog Devices is a Line Driver & Receiver with 2 functions, operating at 5V. It features a small outline package style, CMOS technology, and EIA-232-E interface standard. Ideal for applications requiring inverted output polarity and Schmitt trigger input characteristics in commercial temperature grade environments.

SN65HVD73DGS

Texas Instruments

SN65HVD73DGS by Texas Instruments is a line driver/receiver with 10 terminals, operating at 3-3.6V. It features EIA-485 interface standard, differential output, and peak reflow temp of 260°C. Ideal for automotive applications due to its small outline package and wide temperature range from -40 to 125°C.

MAX3221EEAE+TG071

Maxim Integrated

LINE TRANSCEIVER; Terminal Finish: Matte Tin (Sn); Moisture Sensitivity Level (MSL): 1; JESD-609 Code: e3; Maximum Time At Peak Reflow Temperature (s): 30; Peak Reflow Temperature (C): 260;

DS26C32ATMDC

Texas Instruments

DS26C32ATMDC by Texas Instruments is a CMOS line receiver with 4 functions, operating at -40 to 85°C. It supports EIA-422, EIA-423, FED STD 1020, and FED STD 1030 interface standards. Ideal for industrial applications requiring differential Schmitt trigger input characteristics and a max receive delay of 30 ns.

MAX3485EESA+

Maxim Integrated

LINE TRANSCEIVER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;

ISO1176DWRG4

Texas Instruments

ISO1176DWRG4 by Texas Instruments is a line driver/receiver with max supply voltage of 5.5V, transmit delay of 40ns, and differential output. Ideal for EIA-485/TIA-485 interfaces in industrial applications due to its small outline package and dual terminal position.

SN65HVD1781P

Texas Instruments

SN65HVD1781P by Texas Instruments is an 8-terminal line driver/receiver with a max supply voltage of 5.5V and operating temperature range of -40 to 105°C. It features differential output, EIA-485-A interface standard, and is ideal for industrial applications requiring reliable communication over long distances.

XISOW1412DFMR

Texas Instruments

XISOW1412DFMR by Texas Instruments is a Line Transceiver IC with EIA-422/EIA-485 interface standards. It operates at 1.71-1.89V, has 20 terminals, and offers differential output. With a small outline package style, it's ideal for applications requiring high-speed data transmission in industrial environments.

ISL3232EIRZ-T

Renesas Electronics

ISL3232EIRZ-T by Renesas Electronics is a Line Driver & Receiver with 2 functions, operating at 3-5.5V. It features EIA-232, TIA-232, V.24, and V.28 interface standards for industrial applications. This CMOS technology chip carrier has a quad terminal position and matte tin finish suitable for surface mount assembly.

ISL81387IAZ-T7A

Renesas Electronics

ISL81387IAZ-T7A by Renesas Electronics is a Line Driver & Receiver with 2 functions, operating at 4.5-5.5V. It features EIA-232 interface standard, Schmitt trigger input characteristics, and BICMOS technology. Ideal for industrial applications requiring reliable data transmission in harsh environments.