Image shown is a representation only. Exact specifications should be obtained from the product data sheet.

MAX485CUA

Manufacturer

Maxim Integrated
Manufacturer's Part Number

MAX485CUA
Description

LINE TRANSCEIVER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: TSSOP; Package Shape: SQUARE;
Datasheet

Datasheet

Not In Stock

Popular Products

2N2222A

Comset Semiconductors

NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;

Details

1N4148

Rfe International

RECTIFIER DIODE; Surface Mount: NO; No. of Elements: 1; Maximum Repetitive Peak Reverse Voltage: 100 V; Maximum Forward Voltage (VF): 1 V; Config: SINGLE;

Details

2N2222A

Surge Components

NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Collector Current (IC): .6 A; No. of Terminals: 3;

Details

U.FL-R-SMT-1(10)

Hirose Electric

U.FL-R-SMT-1(10) by Hirose Electric is a RF connector with 50 ohm impedance, 0.05 dB insertion loss, and 8 GHz operating frequency. Ideal for board mounting in commercial applications, it features gold termination finish, liquid crystal polymer insulator, and 200VAC dielectric voltage resistance.

Details

1N4148WT

Fairchild Semiconductor

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

LM358AN

NXP Semiconductors

OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;

Details

LM358N

Texas Instruments

LM358N by Texas Instruments is an operational amplifier with 2 functions, offering a max input offset voltage of 9000 uV and a nominal common mode reject ratio of 85 dB. Widely used in commercial applications, it operates at temperatures ranging from 0 to 70 °C and has a unity gain bandwidth of 1000 kHz.

Details

261

New England Microwave

Other Interface ICs; No. of Terminals: 14; Package Equivalence Code: FL14(UNSPEC); Power Supplies (V): +-5,-15; Package Body Material: PLASTIC/EPOXY; Surface Mount: YES;

Details

LM2675M-ADJ/NOPB

National Semiconductor

SWITCHING REGULATOR; Temperature Grade: AUTOMOTIVE; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;

Details

ERJ6ENF10R0V

Panasonic

Panasonic ERJ6ENF10R0V is a 10 ohm fixed resistor with 1% tolerance, suitable for surface mount applications. With a rated power dissipation of 0.125W and operating voltage of 150V, it operates b/w -55°C to 155°C. Its metal glaze/thick film technology ensures stable performance in various electronic circuits.

Details

LL4148

Panjit International

RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;

Details

LL4148

First Components International

RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;

Details

PIC18F4550T-I/PT

Microchip Technology

The Microchip Technology PIC18F4550T-I/PT microcontroller operates at a max clock frequency of 48 MHz with 8-bit architecture. It features 13-Ch 10-Bit ADC channels and USB connectivity, making it suitable for industrial applications requiring high-speed data processing and analog-to-digital conversion. With low power mode and flash ROM programmability, this device offers efficient performance in compact designs.

Details

LM555CN

National Semiconductor

PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO;

Details

LM555CMX

Texas Instruments

LM555CMX by Texas Instruments is an Analog Waveform Generation IC with 8 terminals. It operates at a nominal voltage of 5V and supports power supplies ranging from 5V to 15V. This versatile IC, housed in a small outline package, is commonly used for pulse and rectangular waveform generation in commercial temperature environments.

Details

BSS138DW-7-F

Diodes Incorporated

BSS138DW-7-F by Diodes Incorporated is a N-channel small signal FET with a min DS breakdown voltage of 50V. It is used for switching applications and operates in enhancement mode. This surface mount transistor has a max drain current of 0.2A and a max power dissipation of 0.2W.

Details

BAV99

Meritek Electronics

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

1N4148

Baneasa S A

RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;

Details

2N7002

Vishay Intertechnology

2N7002 by Vishay Intertechnology is a N-CHANNEL FET with 60V DS Breakdown Voltage, 0.115A Drain Current, and 7.5 ohm On Resistance. Ideal for SWITCHING applications due to its SINGLE configuration with BUILT-IN DIODE. Operates in ENHANCEMENT MODE, suitable for surface mount with GULL WING terminals.

Details

AMS1117-3.3

Advanced Monolithic Systems

AMS1117-3.3 by Advanced Monolithic Systems is a fixed positive single output LDO regulator with 1A max output current, 3% voltage tolerance, and 1.3V dropout voltage. Ideal for applications requiring stable 3.3V supply in compact designs due to its small outline package and excellent load regulation of 0.025%.

Details

MAX485CUA Technical Details

TYPE	DESCRIPTION
Minimum Supply Voltage:	4.75 V
Package Body Material:	PLASTIC/EPOXY
Nominal Supply Voltage:	5 V
Output Characteristics:	3-STATE
Maximum Seated Height:	1.1 mm
Minimum Out Swing:	1.5 V
Maximum High Level Input Current:	.001 Amp
Sub-Category:	Line Driver or Receivers
Surface Mount:	YES
Maximum Supply Current:	.9 mA
Terminal Finish:	TIN LEAD
No. of Terminals:	8
Terminal Position:	DUAL
Package Style (Meter):	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH
Technology:	CMOS
JESD-30 Code:	S-PDSO-G8
Package Shape:	SQUARE
Terminal Form:	GULL WING
Maximum Operating Temperature:	70 Cel
Package Code:	TSSOP
Interface Standard:	EIA-422; EIA-485
Interface IC Type:	LINE TRANSCEIVER
Width:	3 mm
Maximum Output Low Current:	4 Amp
Moisture Sensitivity Level (MSL):	1
Output Polarity:	COMPLEMENTARY
Input Characteristics:	DIFFERENTIAL SCHMITT TRIGGER
Driver No. of Bits:	1
Maximum Supply Voltage:	5.25 V
Differential Output:	YES
JESD-609 Code:	e0
Minimum Operating Temperature:	0 Cel
No. of Functions:	1
Qualification:	Not Qualified
Maximum Transmit Delay:	60 ns
Package Equivalence Code:	SSOP8,.2
Receiver No. of Bits:	1
Length:	3 mm
Maximum Receive Delay:	200 ns
Additional Features:	1 RECEIVER ACTIVE UNDER SHUTDOWN; TRISTATABLE RECEIVER
Peak Reflow Temperature (C):	245
Terminal Pitch:	.65 mm
Temperature Grade:	COMMERCIAL
Power Supplies (V):	5

Category Top Products

MAX232CPE+

Analog Devices

Analog Devices' MAX232CPE+ is a Line Driver & Receiver with 2 functions, operating at 5V. It has a max transmit delay of 40,000ns and can handle up to 10mA supply current. Ideal for EIA-232-E, TIA-232-E interfaces in commercial temperature grade applications.

LT1785AIS8#PBF

Analog Devices

LT1785AIS8#PBF by Analog Devices is a Line Driver & Receiver with 8 terminals, operating voltage range of 4.75-5.25 V, and differential output. It has a max transmit delay of 2000 ns and receive delay of 900 ns, suitable for EIA-422/EIA-485 interface applications in industrial settings.

MAX3082ECSA+

Maxim Integrated

LINE TRANSCEIVER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;

MAX3221CAE+

Maxim Integrated

LINE TRANSCEIVER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 16; Package Code: SSOP; Package Shape: RECTANGULAR;

MAX3232ECPE+

Analog Devices

MAX3232ECPE+ by Analog Devices is a Line Driver & Receiver with 16 terminals. It operates at 3-5.5V, has 2 functions, and uses BICMOS technology. Ideal for EIA-232, TIA-232, V.24, V.28 interfaces in commercial applications requiring high output current of 1.6A.

SP3485EN-L

Maxlinear

LINE TRANSCEIVER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;

LTC485IN8#PBF

Analog Devices

LTC485IN8#PBF by Analog Devices is a CMOS line driver with 3-STATE output, EIA-422 and EIA-485 interface standards, and differential output. It operates b/w -40 to 85°C, has a max transmit delay of 50 ns, and can handle supply voltages from 4.75V to 5.25V. Ideal for industrial applications requiring reliable communication over long distances.

MAX232DWR

Texas Instruments

MAX232DWR by Texas Instruments is a Line Driver & Receiver with 2 functions, operating at 5V. It features totem-pole output characteristics and inverted polarity, suitable for EIA-232-F, TIA-232-F, V.28 interfaces. With a small outline package style and Schmitt trigger input characteristics, it is ideal for commercial temperature grade applications.

ADM3202ARNZ-REEL7

Analog Devices

ADM3202ARNZ-REEL7 by Analog Devices is a Line Driver & Receiver with 3.3V power supply, 5.5V max voltage, and 1.6A output current. Ideal for industrial applications requiring EIA-232-E, TIA-232-E, V.28 interface standard compliance in compact design with dual terminals and CMOS technology.

ISL3173EIUZ

Renesas Electronics

ISL3173EIUZ by Renesas Electronics is a Line Driver & Receiver with 10 terminals, operating at -40 to 85°C. It features EIA-422 and EIA-485 interface standards, BICMOS technology, and differential output. Ideal for industrial applications requiring a small outline package with a max supply voltage of 3.6V.

SP3232EEN-L/TR

Exar

Exar's SP3232EEN-L/TR is a 16-terminal line driver/receiver with 3-5V power supplies. It operates in industrial temperatures (-40 to 85°C) and supports EIA-232, V.24 interfaces. With dual terminals and Schmitt trigger input characteristics, it's ideal for data communication applications.

MAX3232IDRG4

Texas Instruments

MAX3232IDRG4 by Texas Instruments is a Line Driver & Receiver with 16 terminals. It operates at 3.3/5V, has a max supply voltage of 3.6V, and offers inverted output polarity. Ideal for industrial applications requiring EIA-232-F, TIA-232-F, V.28 interface standard compliance with a temperature range of -40 to 85°C.

AM26LV32CDR

Texas Instruments

AM26LV32CDR by Texas Instruments is a 16-terminal line driver/receiver with 4 functions. Operating at 3.3V, it has a max supply voltage of 3.6V and supports EIA-422-B, TIA-422-B, V.11 standards. Ideal for applications requiring differential Schmitt trigger input characteristics and true output polarity in commercial temperature grades.

FIN1002M5X

Onsemi

FIN1002M5X by Onsemi is a line receiver with 3.3V nominal voltage, 2.5ns max receive delay, and 8A max output low current. It is used in industrial applications requiring EIA-644/TIA-644 interface standard compliance for high-speed data transmission.

ST3485ECDR

STMicroelectronics

ST3485ECDR by STMicroelectronics is a Line Driver & Receiver with 3.3V power supply, EIA-422/EIA-485 interface standard, and 30ns max transmit delay. Ideal for commercial applications requiring differential output and Schmitt trigger input characteristics in a small outline package.

ISL3178EIBZ-T

Intersil

LINE TRANSCEIVER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;

ISL3170EIUZ-T

Intersil

LINE TRANSCEIVER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 10; Package Code: TSSOP; Package Shape: SQUARE;

ADM2587EBRWZ-REEL7

Analog Devices

ADM2587EBRWZ-REEL7 by Analog Devices is a line driver/receiver with 20 terminals, operating at -40 to 85°C. It features a max supply voltage of 5.5V and differential output for EIA-485-A, TIA-485-A, ISO 8482E interfaces. Ideal for industrial applications requiring reliable communication over long distances.

MAX232AEWE-T

Maxim Integrated

MAX232AEWE-T by Maxim Integrated is a Line Driver & Receiver with 2 functions, operating at 5V. It has a max transmit delay of 3500ns and can handle up to 10mA supply current. Ideal for EIA-232-E, TIA-232-E, V.28, and V.24 interface standards in commercial temperature grade applications.

MAX3232IPW

Texas Instruments

MAX3232IPW by Texas Instruments is a line driver and receiver with a max supply voltage of 3.6V. It has 2 functions and can operate in temperatures ranging from -40 to 85°C. This IC is commonly used as a line transceiver in industrial applications.