Image shown is a representation only. Exact specifications should be obtained from the product data sheet.

SN75ALS181NSR

Manufacturer

Texas Instruments
Manufacturer's Part Number

SN75ALS181NSR
Description

LINE TRANSCEIVER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 14; Package Code: SOP; Package Shape: RECTANGULAR;
Datasheet

Datasheet

Not In Stock

Popular Products

2N7002

Yangzhou Yangjie Electronics

N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; No. of Elements: 1; Terminal Form: GULL WING; Maximum Drain Current (ID): .34 A;

Details

1N4148

Renesas Electronics

RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;

Details

2N7002

Silicon Standard

N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): .225 W; Maximum Drain-Source On Resistance: 7.5 ohm; Transistor Element Material: SILICON;

Details

NE555/D

General Electric Solid State

Analog Waveform Generation Functions; Temperature Grade: COMMERCIAL; Maximum Operating Temperature: 70 Cel; Technology: BIPOLAR; Package Equivalence Code: DIE OR CHIP; Qualification: Not Qualified;

Details

BAV99

Sensitron Semiconductor

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

LM358D-T

NXP Semiconductors

LM358D-T by NXP Semiconductors is a dual operational amplifier with 70dB CMRR, 1000kHz unity gain bandwidth, and 9000uV max input offset voltage. Widely used in commercial applications due to its small outline package and low bias current of 0.5uA.

Details

2N2222A

Taitron Components

NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; No. of Terminals: 3;

Details

LM107H/883C

National Semiconductor

LM107H/883C by National Semiconductor is a MILITARY-grade Operational Amplifier with +-5/+-15V supplies. Featuring 2000uV max input offset voltage, it operates from -55 to 125 °C. Ideal for applications requiring VOLTAGE-FEEDBACK architecture and frequency compensation.

Details

LM358DR2G

Onsemi

LM358DR2G by Onsemi is a dual operational amplifier with 7000uV max input offset voltage and 70dB nominal CMRR. Ideal for applications requiring low bias current such as sensor interfaces, signal conditioning circuits, and audio amplifiers. Package style: Small Outline, Technology: Bipolar, Unity Gain Bandwidth: 1000 kHz.

Details

BSS138

Changzhou Galaxy Century Microelectronics

N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Time At Peak Reflow Temperature (s): NOT SPECIFIED; Minimum DS Breakdown Voltage: 50 V; Maximum Operating Temperature: 150 Cel;

Details

CRG0805F10K

TE Connectivity

TE Connectivity's CRG0805F10K is a 10000 ohm fixed resistor with 1% tolerance. It operates b/w -55 to 155 °C and has a power dissipation of 0.125 W. Ideal for surface mount applications in various electronic circuits due to its compact size and high temperature rating.

Details

ERJ3EKF1002V

Panasonic

Panasonic's ERJ3EKF1002V is a fixed resistor with 10000 ohm resistance, 1% tolerance, and 0.1 W power dissipation. It operates b/w -55 to 155 °C and is ideal for surface mount applications in automotive electronics due to AEC-Q200 compliance.

Details

0462-201-16141

TE Connectivity

TE Connectivity's 0462-201-16141 is a CRIMP terminal with MACHINED contact design. It operates b/w -55 to 125 °C, suitable for wire gauges from 20 to 16 AWG. With a rated current of 13A, it is ideal for applications requiring FEMALE ROUND PIN-SOCKET contacts.

Details

OHN3020U

Tt Electronics Plc

OHN3020U by Tt Electronics Plc is a magnetic field sensor with a max supply voltage of 24V and hysteresis of 5mT. It features an output range of 25mA and operates in temperatures ranging from -20 to 85°C. Ideal for applications requiring precise detection and measurement of magnetic fields, such as automotive sensors or industrial automation systems.

Details

2N2222A

Shanghai Lunsure Electronic Technology

NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; JESD-30 Code: O-MBCY-W3;

Details

MMBT3904-7-F

Diodes Incorporated

Diodes Inc. MMBT3904-7-F is a NPN BJT transistor for switching applications. Features include VCEsat of 0.3V, hFE of 30, and IC of 0.2A. With a max operating temp of 150°C, it's ideal for small outline SMT designs in automotive electronics.

Details

NE555D

Fairchild Semiconductor

PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;

Details

1N4148

Forward International Electronics

RECTIFIER DIODE; Surface Mount: NO; Maximum Output Current: .15 A; Maximum Reverse Recovery Time: .004 us; Maximum Operating Temperature: 200 Cel; No. of Phases: 1;

Details

FDC5614P

TAIZHOU ELECTRONICS CO LTD

P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 1.92 W; Maximum Operating Temperature: 150 Cel; Package Body Material: PLASTIC/EPOXY;

Details

LM2675M-ADJ/NOPB

Texas Instruments

LM2675M-ADJ/NOPB by Texas Instruments is a voltage-mode switching regulator with 1A output current, 37V max output voltage, and 260kHz max switching frequency. Ideal for automotive applications due to its -40°C to 125°C operating temperature range and compact small outline package design.

Details

SN75ALS181NSR Technical Details

TYPE	DESCRIPTION
Minimum Supply Voltage:	4.75 V
Package Body Material:	PLASTIC/EPOXY
Minimum Supply Voltage-1:	4.75 V
Nominal Supply Voltage:	5 V
Maximum Time At Peak Reflow Temperature (s):	30
Maximum Seated Height:	2 mm
Minimum Out Swing:	1.5 V
Maximum High Level Input Current:	.00002 Amp
Sub-Category:	Line Driver or Receivers
Surface Mount:	YES
Maximum Supply Current:	30 mA
Terminal Finish:	NICKEL PALLADIUM GOLD
No. of Terminals:	14
Terminal Position:	DUAL
Package Style (Meter):	SMALL OUTLINE
Technology:	TTL
JESD-30 Code:	R-PDSO-G14
Package Shape:	RECTANGULAR
Terminal Form:	GULL WING
Maximum Operating Temperature:	70 Cel
Package Code:	SOP
Interface Standard:	EIA-422-B; TIA-422-B; EIA-485-A; TIA-485-A; V.10; V.11; X.26; X.27
Interface IC Type:	LINE TRANSCEIVER
Width:	5.3 mm
Nominal Supply Voltage-1:	5 V
Maximum Supply Voltage-1:	5.25 V
Maximum Output Low Current:	.02 Amp
Moisture Sensitivity Level (MSL):	1
Input Characteristics:	DIFFERENTIAL SCHMITT TRIGGER
Driver No. of Bits:	1
Maximum Supply Voltage:	5.25 V
Differential Output:	YES
JESD-609 Code:	e4
Minimum Operating Temperature:	0 Cel
No. of Functions:	1
Qualification:	Not Qualified
Maximum Transmit Delay:	20 ns
Package Equivalence Code:	SOP14,.3
Receiver No. of Bits:	1
Length:	10.2 mm
Maximum Receive Delay:	25 ns
Peak Reflow Temperature (C):	260
Terminal Pitch:	1.27 mm
Temperature Grade:	COMMERCIAL
Power Supplies (V):	5

Category Top Products

ADM3202ARNZ-REEL7

Analog Devices

ADM3202ARNZ-REEL7 by Analog Devices is a Line Driver & Receiver with 3.3V power supply, 5.5V max voltage, and 1.6A output current. Ideal for industrial applications requiring EIA-232-E, TIA-232-E, V.28 interface standard compliance in compact design with dual terminals and CMOS technology.

MAX3221CPWR

Texas Instruments

MAX3221CPWR by Texas Instruments is a Line Driver & Receiver with 16 terminals, operating at 3.3/5V. It has a max supply voltage of 5.5V and operates in commercial temperature grade from 0 to 70°C. Ideal for EIA-232-F, TIA-232-F, V.28 interfaces due to its CMOS technology and Schmitt trigger input characteristics.

ISL3173EIUZ

Intersil

LINE TRANSCEIVER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 10; Package Code: TSSOP; Package Shape: SQUARE;

MAX3232ECPE

Maxim Integrated

MAX3232ECPE by Maxim Integrated is a Line Driver & Receiver with 16 terminals. It operates b/w 3-5.5V, has 2 functions, and supports EIA-232, TIA-232 interfaces. With a max output low current of 1.6A, it's ideal for applications requiring reliable data transmission in commercial temperature environments.

SN65C3232EPWR

Texas Instruments

SN65C3232EPWR by Texas Instruments is a Line Driver & Receiver with 16 terminals, operating at 3.3/5V power supplies. It features EIA-232 interface standard, Schmitt trigger input characteristics, and inverted output polarity. Ideal for industrial applications requiring reliable data transmission over short distances.

MAX3232IDW

Texas Instruments

MAX3232IDW by Texas Instruments is a Line Driver & Receiver with 16 terminals, operating at temperatures from -40 to 85°C. It has a max supply voltage of 3.6V and peak reflow temperature of 260°C. Ideal for industrial applications requiring EIA-232-F, TIA-232-F, V.28 interface standard compliance.

LTC2862IDD-2#TRPBF

Linear Technology

LINE TRANSCEIVER; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 8; Package Code: HVSON; Package Shape: SQUARE;

SP3232EEY-L/TR

Maxlinear

LINE TRANSCEIVER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 16; Package Code: TSSOP; Package Shape: RECTANGULAR;

SN65HVD1781DG4

Texas Instruments

SN65HVD1781DG4 by Texas Instruments is a line driver/receiver with 3.15-5.5V supply, 200ns delay, and differential output. Ideal for automotive applications, it operates b/w -40 to 125°C and complies with EIA-485-A; TIA-485-A standards.

MAX3072EESA

Maxim Integrated

MAX3072EESA by Maxim Integrated is a Line Driver & Receiver with 3.3V supply, 1A output current, and BICMOS technology. It supports EIA-422, EIA-485, TIA-485 interfaces for industrial applications requiring differential Schmitt trigger inputs and dual terminal position in a small outline package.

ISL83483IBZ-T

Renesas Electronics

ISL83483IBZ-T by Renesas Electronics is an 8-terminal line driver with a max supply voltage of 3.6V and differential output. It operates in industrial temperatures (-40 to 85°C) and supports EIA-485/EIA-422 interfaces, making it ideal for communication applications requiring reliable signal transmission over short distances.

LT1785IS8#PBF

Analog Devices

LT1785IS8#PBF by Analog Devices is a Line Driver & Receiver with 8 terminals, operating at -40 to 85 °C. It has a max supply voltage of 5.25 V and differential output characteristics. Ideal for EIA-422/EIA-485 interfaces in industrial applications due to its small outline package and dual terminal position.

AM26LV31EIDR

Texas Instruments

AM26LV31EIDR by Texas Instruments is a 4-bit line driver with a max supply voltage of 3.6V. It is used in applications requiring EIA-422-B, TIA-422-B, and V.11 interface standards.

MAX232IDW

Texas Instruments

MAX232IDW by Texas Instruments is a line driver and receiver with a max supply voltage of 5.5V. It has 2 functions and is used for EIA-232-F, TIA-232-F, and V.28 interface standards in industrial applications.

SN75179BDR

Texas Instruments

SN75179BDR by Texas Instruments is a Line Driver & Receiver with 8 terminals, operating at 5V. It features a max transmit delay of 22ns and differential output. Ideal for EIA-422-B, TIA-422-B, EIA-485-A, TIA-485-A, V.11 interfaces in commercial temperature grade applications.

MAX232EWE+

Analog Devices

MAX232EWE+ by Analog Devices is a Line Driver & Receiver with 2 functions, operating at 5V. It has a max supply voltage of 5.5V and can withstand temperatures from -40 to 85°C. Ideal for industrial applications requiring EIA-232-E, TIA-232-E, V.28, or V.24 interface standards.

DS2480B+T&R

Analog Devices

DS2480B+T&R by Analog Devices is a small outline line driver with 8 terminals. It operates b/w -40 to 85°C, with a supply voltage range of 4.5-5.5V. Ideal for EIA-232-C interface applications in industrial settings due to its compact size and standard input characteristics.

IL485WE

Nve

IL485WE by Nve is a Line Driver & Receiver with 16 terminals, operating voltage of 4.5-5.5V, and max transmit delay of 32ns. Ideal for industrial applications requiring EIA-422-B, TIA-422-B, or EIA-485 interface standards in compact designs with surface mount capability.

SN65HVD1785DR

Texas Instruments

SN65HVD1785DR by Texas Instruments is an EIA-485/TIA-485 line transceiver with a 5.5V supply voltage, 2000ns transmit delay, and 200ns receive delay. It is ideal for industrial applications requiring differential output and Schmitt trigger input characteristics in a compact small outline package.

ISL83485IBZ-T

Intersil

LINE TRANSCEIVER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;