Image shown is a representation only. Exact specifications should be obtained from the product data sheet.

MAX3490EESA

Manufacturer

Maxim Integrated
Manufacturer's Part Number

MAX3490EESA
Description

LINE TRANSCEIVER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
Datasheet

Datasheet

Not In Stock

Popular Products

1N4148

Baneasa S A

RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;

Details

MBRS130LT3G

Rochester Electronics

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: J BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

LM358N

NXP Semiconductors

OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;

Details

2N2222A

Telcom Semiconductor

NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;

Details

ABS07-32.768KHZ-T

Abracon

Abracon ABS07-32.768KHZ-T crystal oscillator offers 20 ppm frequency tolerance, 144% stability, and 70000 ohm series resistance. Ideal for applications requiring 0.032768 MHz frequency precision in a compact surface-mount design with gold over nickel finish.

Details

1N4148

New Jersey Semiconductor Products

RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;

Details

OPA2277UA

Burr-Brown Corporation

OPERATIONAL AMPLIFIER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;

Details

LM555CM

Texas Instruments

LM555CM by Texas Instruments is an Analog Waveform Generation IC with a supply voltage range of 4.5V to 16V and max operating temperature of 70°C. It comes in a small outline package, suitable for applications requiring pulse generation or rectangular waveform outputs. With surface mount capability and low supply current of 15mA, it is ideal for commercial-grade electronic circuits.

Details

ERJ2RKF1002X

Panasonic

Panasonic's ERJ2RKF1002X is a fixed resistor with 10000 ohm resistance, 1% tolerance, and 0.1 W power dissipation. Ideal for surface mount applications in automotive electronics due to AEC-Q200 compliance and operating temperature range of -55 to 155 °C.

Details

BAV99

Vishay Intertechnology

Vishay Intertechnology's BAV99 diode features a max forward voltage of 1.3V and a max output current of 0.15A, making it ideal for rectification applications. With a small outline package style and dual terminal position, this series-connected diode is designed for surface mount usage in various electronic circuits with an operating temperature range from -55°C to 150°C.

Details

2N2222A

Loras Industries

NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;

Details

261

Micronetics

Other Interface ICs; Temperature Grade: MILITARY; Terminal Form: FLAT; No. of Terminals: 14; Package Code: DFP; Package Shape: SQUARE;

Details

SMBJ18CA

Rectron

TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

1N4148WT

Diotec Semiconductor Ag

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

SMBJ18CA

Pro-an Electronic

TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Maximum Clamping Voltage: 29.2 V; Polarity: BIDIRECTIONAL; Nominal Breakdown Voltage: 21.05 V; Maximum Repetitive Peak Reverse Voltage: 18 V;

Details

BAV99

Motorola

RECTIFIER DIODE; Surface Mount: YES; Maximum Output Current: .1 A; Maximum Reverse Recovery Time: .006 us; Maximum Repetitive Peak Reverse Voltage: 70 V; JESD-609 Code: e0;

Details

ULN2803ADW

Texas Instruments

ULN2803ADW by Texas Instruments is a peripheral driver with 8 functions, open-collector output characteristics, and built-in transient protections. It operates b/w -40 to 85 °C and has a max supply voltage of 3 V. Ideal for applications requiring buffer or inverter-based peripheral drivers with sink current flow direction.

Details

1N4148WS

Eic Semiconductor

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

2N2222A

Allegro MicroSystems

NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;

Details

STM32F103C8T6

STMicroelectronics

STM32F103C8T6 by STMicroelectronics is a 32-bit microcontroller with 48 terminals, operating at up to 16 MHz. It features 10-Ch 12-Bit ADC channels and 7 DMA channels, suitable for industrial applications requiring low power consumption and high-speed connectivity via CAN, I2C(2), SPI(2), USART(3), USB.

Details

MAX3490EESA Technical Details

TYPE	DESCRIPTION
Minimum Supply Voltage:	3 V
Package Body Material:	PLASTIC/EPOXY
Nominal Supply Voltage:	3.3 V
Maximum Time At Peak Reflow Temperature (s):	20
Maximum Seated Height:	1.75 mm
Minimum Out Swing:	1.5 V
Sub-Category:	Line Driver or Receivers
Surface Mount:	YES
Maximum Supply Current:	2.2 mA
Terminal Finish:	TIN LEAD
No. of Terminals:	8
Terminal Position:	DUAL
Package Style (Meter):	SMALL OUTLINE
JESD-30 Code:	R-PDSO-G8
Package Shape:	RECTANGULAR
Terminal Form:	GULL WING
Maximum Operating Temperature:	85 Cel
Package Code:	SOP
Interface Standard:	EIA-422; EIA-485
Interface IC Type:	LINE TRANSCEIVER
Width:	3.9 mm
Maximum Output Low Current:	2.5 Amp
Moisture Sensitivity Level (MSL):	1
Input Characteristics:	DIFFERENTIAL SCHMITT TRIGGER
Driver No. of Bits:	1
Maximum Supply Voltage:	3.6 V
Differential Output:	YES
JESD-609 Code:	e0
Minimum Operating Temperature:	-40 Cel
No. of Functions:	1
Qualification:	Not Qualified
Maximum Transmit Delay:	35 ns
Package Equivalence Code:	SOP8,.25
Receiver No. of Bits:	1
Length:	4.9 mm
Peak Reflow Temperature (C):	240
Terminal Pitch:	1.27 mm
Temperature Grade:	INDUSTRIAL
Power Supplies (V):	3.3

Category Top Products

LTC2870IUFD#PBF

Analog Devices

LTC2870IUFD#PBF by Analog Devices is a Line Driver & Receiver with 2 functions, operating at -40 to 85°C. It features a max supply voltage of 5.5V and offers EIA-232, EIA-422, EIA-485 interface standards. Ideal for industrial applications requiring differential outputs with low current consumption.

MAX3232IPW

Texas Instruments

MAX3232IPW by Texas Instruments is a line driver and receiver with a max supply voltage of 3.6V. It has 2 functions and can operate in temperatures ranging from -40 to 85°C. This IC is commonly used as a line transceiver in industrial applications.

SP3072EEN-L/TR

Sipex

LINE TRANSCEIVER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;

MAX3483ESA+T

Maxim Integrated

LINE TRANSCEIVER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;

SN65HVD75DR

Texas Instruments

SN65HVD75DR by Texas Instruments is a line driver & receiver with 3.6V max supply voltage, 17ns max transmit delay, and 70ns max receive delay. Ideal for automotive applications due to its EIA-422/EIA-485 interface standard and differential output capability.

MAX3232ECAE+

Analog Devices

MAX3232ECAE+ by Analog Devices is a Line Driver & Receiver with 16 terminals, operating at 3-5.5V. It features dual functions, BICMOS technology, and supports EIA-232/TIA-232/V.24/V.28 interfaces. Ideal for applications requiring reliable signal transmission in commercial temperature range of 0-70°C.

MAX232ACSE

Rochester Electronics

LINE TRANSCEIVER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 16; Package Code: SOP; Package Shape: RECTANGULAR;

ISL83483IBZ

Intersil

LINE TRANSCEIVER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;

ISO1412DWR

Texas Instruments

ISO1412DWR by Texas Instruments is a Line Transceiver with 16 terminals, operating at -40 to 125 °C. It features EIA-485-A interface standard, differential output, and 570 ns max transmit delay. Ideal for automotive applications requiring high-speed data transmission in compact spaces.

MAX13487EESA

Analog Devices

MAX13487EESA by Analog Devices is a Line Driver & Receiver with 8 terminals, operating at 5V. It has a max supply voltage of 5.25V and can handle industrial temperatures from -40 to 85°C. Ideal for EIA-422-B and EIA-485 interfaces, it offers differential outputs and operates on a low current of 4.5mA.

ISL3295EFHZ-T7A

Renesas Electronics

ISL3295EFHZ-T7A by Renesas Electronics is a Line Driver with 6 terminals, operating at 3-5.5V. It features a max transmit delay of 1500ns and supports EIA-485/EIA-422 interface standards. Ideal for automotive applications due to its low profile design and BICMOS technology.

AM26LS31CN

Rochester Electronics

LINE DRIVER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 16; Package Code: DIP; Package Shape: RECTANGULAR;

LTC2870IUFD#TRPBF

Analog Devices

LTC2870IUFD#TRPBF by Analog Devices is a Line Driver & Receiver with 2 functions, operating at -40 to 85°C. It features a max supply voltage of 5.5V, transmit delay of 70ns, and differential output for EIA-232/422/485 interfaces. Ideal for industrial applications requiring reliable communication over short distances.

MAX202CDR

Texas Instruments

The Texas Instruments MAX202CDR is a Line Driver & Receiver with 2 functions, operating at 5V. It features a max supply voltage of 5.5V and operates within a temperature range of 0-70°C. Ideal for EIA-232-F, TIA-232-F, V.28 interfaces in commercial applications requiring inverted output polarity and Schmitt trigger input characteristics.

FIN1108MTD

Fairchild Semiconductor

LINE TRANSCEIVER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 48; Package Code: TSSOP; Package Shape: RECTANGULAR;

SN65176BDRE4

Texas Instruments

SN65176BDRE4 by Texas Instruments is a line driver/receiver with 5V supply, 22ns transmit delay, and 35ns receive delay. Ideal for industrial applications requiring EIA-422-B, TIA-422-B, EIA-485-A, TIA-485-A, V.11, or X.27 interface standards in a compact small outline package.

MAX3221EIPWRG4

Texas Instruments

MAX3221EIPWRG4 by Texas Instruments is a Line Driver & Receiver with 16 terminals, operating at 3.3/5V. It has a max supply voltage of 3.6V and can handle industrial temperatures from -40 to 85°C. Ideal for EIA-232-F, TIA-232-F, V.28 interfaces due to its Schmitt trigger input characteristics and inverted output polarity.

MAX3232EUE+T

Analog Devices

MAX3232EUE+T by Analog Devices is a Line Driver & Receiver with 3.3/5V power supplies, operating temperature range of -40 to 85°C, and EIA-232/EIA-562 interface standard. It features Schmitt trigger input characteristics, dual terminal position, and Gull Wing terminal form. Ideal for industrial applications requiring reliable communication over short distances.

MAX232DRG4

Texas Instruments

MAX232DRG4 by Texas Instruments is a Line Driver & Receiver with 2 functions, operating at 5V. It has a small outline package style and operates b/w 0-70°C. Ideal for EIA-232-F, TIA-232-F, V.28 interfaces in commercial applications.

MAX3160EAP

Maxim Integrated

MAX3160EAP by Maxim Integrated is a Line Driver & Receiver with 2 functions. It operates at supply voltages of 3.3V/5V, has a max transmit delay of 800ns, and supports EIA-232, EIA-422, and EIA-485 interfaces. Ideal for industrial applications requiring reliable communication over short distances.