Image shown is a representation only. Exact specifications should be obtained from the product data sheet.

AUIR2085STR

Manufacturer

International Rectifier
Manufacturer's Part Number

AUIR2085STR
Description

HALF BRIDGE BASED PERIPHERAL DRIVER; Temperature Grade: AUTOMOTIVE; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
Datasheet

Datasheet

Not In Stock

Popular Products

1N4148W-7-F

Multicomp Pro

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

LM358N

Fairchild Semiconductor

OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;

Details

EPCS4SI8N

Altera

CONFIGURATION MEMORY; Temperature Grade: INDUSTRIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Parallel or Serial: SERIAL;

Details

M24308/2-1F

Amphenol

D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Body or Shell Style: RECEPTACLE; Body Length: 1.228 inch; No. of Rows Loaded: 2;

Details

1N4148WSF-7

Diodes Incorporated

1N4148WSF-7 by Diodes Inc. is a single silicon rectifier diode with max output current of 0.25A and max reverse voltage of 100V. It operates b/w -55 to 150°C, has a small outline package style, and is suitable for surface mount applications in various electronic circuits.

Details

2N2222A

Dionics-usa

NPN; Configuration: SINGLE; Surface Mount: YES; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;

Details

SMBJ18CA

Jgd Semiconductors

TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Polarity: BIDIRECTIONAL; Maximum Clamping Voltage: 29.2 V; Nominal Breakdown Voltage: 21.2 V; Maximum Repetitive Peak Reverse Voltage: 18 V;

Details

1N4148WS

Vishay Intertechnology

Vishay Intertechnology's 1N4148WS is a single rectifier diode with a max forward voltage of 1V and output current of 0.15A. With a fast reverse recovery time of 0.004us, it operates up to 150°C. Ideal for applications requiring high-speed switching and low power consumption in surface mount configurations.

Details

CRG0805F10R

TE Connectivity

TE Connectivity's CRG0805F10R is a 10 ohm fixed resistor with 1% tolerance and 0.125 W power dissipation. It features thick film technology, SMT package style, and matte tin over nickel terminal finish. Ideal for surface mount applications in electronics, offering a temperature coefficient of 200 ppm/°C and operating voltage of 150 V.

Details

SS14

Dc Components

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

2N7002

Sinyork

N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Operating Temperature: 85 Cel; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR; Operating Mode: ENHANCEMENT MODE;

Details

BSS138W-7-F

Multicomp Pro

N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Transistor Element Material: SILICON; No. of Elements: 1;

Details

LL4148

Changzhou Galaxy Century Microelectronics

RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;

Details

43025-0400

Molex

The Molex 43025-0400 is a board connector with 4 contacts, 2 rows, and a mating contact pitch of 0.118". It has a body length of 0.27", insulation resistance of 1Gohm, and operates b/w -40 to 105°C. Ideal for commercial applications requiring a female connector with crimp termination and UL94V-0 flammability rating.

Details

BAV99

Weitron Technology

RECTIFIER DIODE; Surface Mount: YES; Maximum Operating Temperature: 150 Cel; Maximum Output Current: .215 A; JESD-609 Code: e0; Maximum Forward Voltage (VF): .715 V;

Details

1N4148

Silicon Standard

RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;

Details

LM317LMX/NOPB

National Semiconductor

ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 8; Package Code: SOP; Terminal Form: GULL WING; Maximum Seated Height: 1.75 mm; Nominal Dropout Voltage-1: 3 V;

Details

BSS84-7-F

SPC TECHNOLOGY/ MULTICOMP

P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Package Shape: RECTANGULAR; Transistor Element Material: SILICON;

Details

M39029/58-360

Fct Electronic

CONNECTOR ACCESSORY; IEC Conformity: NO; Alternate Contact Sources: MILITARY; MIL Conformity: YES; Contact Gender: MALE; MIL-Connector Accessory Name: CONTACT;

Details

2N2222A

Semicoa

NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;

Details

AUIR2085STR Technical Details

TYPE	DESCRIPTION
Minimum Supply Voltage:	10 V
Package Body Material:	PLASTIC/EPOXY
Nominal Supply Voltage:	12 V
Maximum Seated Height:	1.75 mm
Sub-Category:	MOSFET Drivers
Surface Mount:	YES
Terminal Finish:	MATTE TIN
No. of Terminals:	8
Terminal Position:	DUAL
Package Style (Meter):	SMALL OUTLINE
Screening Level:	AEC-Q100
Technology:	CMOS
JESD-30 Code:	R-PDSO-G8
Package Shape:	RECTANGULAR
Terminal Form:	GULL WING
Built-in Protections:	TRANSIENT; OVER CURRENT; UNDER VOLTAGE
Maximum Operating Temperature:	125 Cel
Package Code:	SOP
Interface IC Type:	HALF BRIDGE BASED PERIPHERAL DRIVER
Width:	3.9 mm
Turn-off Time:	.03 us
Moisture Sensitivity Level (MSL):	3
Maximum Supply Voltage:	15 V
Turn-on Time:	.06 us
JESD-609 Code:	e3
Minimum Operating Temperature:	-40 Cel
No. of Functions:	1
Qualification:	Not Qualified
Package Equivalence Code:	SOP8,.25
Output Current Flow Direction:	SOURCE AND SINK
Length:	4.89 mm
Terminal Pitch:	1.27 mm
Temperature Grade:	AUTOMOTIVE
Power Supplies (V):	12

Category Top Products

E-L6201PS

STMicroelectronics

STMicroelectronics E-L6201PS is a full bridge peripheral driver with 20 terminals. It operates at a nominal voltage of 36V and can handle a max supply voltage of 48V. With built-in thermal protection, it is suitable for various applications requiring source and sink output current flow direction.

BSP77E6433HUMA1

Infineon Technologies

BSP77E6433HUMA1 by Infineon is a MOS technology-based peripheral driver with built-in protections for transient, over current, and over voltage. It operates at an industrial temperature grade range from -40 to 85°C, with a nominal voltage of 12V and output peak current limit of 2.8A. This rectangular-shaped device in small outline package is suitable for applications requiring sink output current flow direction.

TPS1H100BQPWPRQ1

Texas Instruments

TPS1H100BQPWPRQ1 by Texas Instruments is a high side driver with built-in protections for transient, over current, thermal, and under voltage. It operates at a max supply voltage of 40V and has a nominal output peak current limit of 7A. Ideal for automotive applications due to its AEC-Q100 screening level and compact rectangular package design.

FPF2702MPX

Onsemi

FPF2702MPX by Onsemi is a peripheral driver with a supply voltage range of 2.8-36V, built-in protections for over current, thermal, and under voltage. It features 8 terminals in a small outline package suitable for industrial applications requiring source output current flow direction.

IRS2153DSPBF

Infineon Technologies

IRS2153DSPBF by Infineon Technologies is a CMOS half bridge peripheral driver with 8 terminals. It operates b/w -40 to 125 °C and supports a supply voltage range of 10.1-15.4 V. Ideal for automotive applications, it offers under voltage protection and source/sink current flow direction.

ULN2003AIPWRE4

Texas Instruments

ULN2003AIPWRE4 by Texas Instruments is a 7-bit buffer/inverter peripheral driver with open-collector output. It features transient protection, sink current flow direction, and bipolar technology. Ideal for applications requiring inverted output polarity in a small outline package with 16 terminals.

VN920B5-E

STMicroelectronics

STMicroelectronics' VN920B5-E is a peripheral driver with 36V max supply voltage, 10A max output current, and built-in protections. Ideal for applications requiring source flow direction, such as automotive systems, industrial controls, and power management circuits.

VND5025AKTR-E

STMicroelectronics

VND5025AKTR-E by STMicroelectronics is a 36V peripheral driver with 2 functions, built-in protections, and CMOS technology. It has a supply voltage range of 8-36V, suitable for buffer or inverter-based applications. The small outline package with gull wing terminals makes it ideal for compact designs requiring source current flow direction.

PTPS22917DBVT

Texas Instruments

BUFFER OR INVERTER BASED PERIPHERAL DRIVER;

MAX14913AKN+

Analog Devices

BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Terminal Finish: Matte Tin (Sn) - annealed; JESD-609 Code: e3; Moisture Sensitivity Level (MSL): 3; Maximum Time At Peak Reflow Temperature (s): 30; Peak Reflow Temperature (C): 260;

VNQ660SPTR-E

STMicroelectronics

STMicroelectronics VNQ660SPTR-E is a MOS technology peripheral driver with 6A max output current. It operates at supply voltages of 6-36V and offers built-in protections against various faults. Ideal for applications requiring high current sink capabilities in compact designs.

IRS2186STRPBF

International Rectifier

BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Temperature Grade: AUTOMOTIVE; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;

BTS6163DAUMA1

Infineon Technologies

BTS6163DAUMA1 by Infineon is a peripheral driver with max supply voltage of 62V, built-in protections for transient, over current, and over voltage. It has turn-on time of 300us and nominal output peak current limit of 5.5A. Ideal for automotive applications requiring high-voltage control and protection features.

NUD3112LT1G

Onsemi

NUD3112LT1G by Onsemi is a CMOS technology-based peripheral driver with a max output current of 0.5A. It features built-in transient protection and operates in industrial temperature grade range (-40 to 85°C). This small outline, thin profile device is ideal for applications requiring sink output current flow direction.

UCC23513DWYR

Texas Instruments

UCC23513DWYR by Texas Instruments is a peripheral driver with built-in transient and under voltage protections. It operates in industrial temperature range (-40 to 115°C) and can handle a max output current of 4.5A. With Schmitt trigger input characteristics, it serves as a buffer or inverter based peripheral driver for various applications.

UDN2987LWTR

Allegro MicroSystems

Allegro MicroSystems' UDN2987LWTR is a Peripheral Driver with 8 functions, 35V max supply voltage, and 0.5A output peak current limit. Ideal for applications requiring source flow direction, such as motor control systems. Features built-in protections against transient events, overcurrent, and thermal issues.

ULN2003A

Onsemi

BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 16; Package Code: DIP; Package Shape: RECTANGULAR;

BSP752TXT

Infineon Technologies

BSP752TXT by Infineon Technologies is a peripheral driver with built-in protections for transient, over current, over voltage, thermal, and under voltage. It operates at a nominal voltage of 13.5 V and has a max supply voltage of 52 V. With a turn-on time of 180 us and turn-off time of 200 us, it is ideal for applications requiring sink output current flow direction.

ISP772TFUMA1

Infineon Technologies

ISP772TFUMA1 by Infineon Technologies is a Peripheral Driver with 8 terminals, offering built-in protections against transient, over current, and over voltage. It operates b/w -30 to 85 °C with a supply voltage range of 5-34 V. Ideal for applications requiring buffer or inverter based peripheral drivers.

AUIR3313STRL

Infineon Technologies

AUIR3313STRL by Infineon Technologies is a peripheral driver with a max supply voltage of 32V and built-in protections for transient, over current, and thermal issues. It has a max output current of 23A and is suitable for applications requiring interface IC type buffer or inverter based peripheral drivers. The package style is small outline with heat sink/slug, making it ideal for compact designs.