Image shown is a representation only. Exact specifications should be obtained from the product data sheet.

SI9986CY-T1-E3

Manufacturer

Vishay Siliconix
Manufacturer's Part Number

SI9986CY-T1-E3
Description

HALF BRIDGE BASED PERIPHERAL DRIVER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
Datasheet

Datasheet

Not In Stock

Popular Products

BSS138-TP

Micro Commercial Components

BSS138-TP by Micro Commercial Components is a N-channel small signal FET with a min DS breakdown voltage of 50V and max drain current of 0.22A. It is commonly used in applications requiring enhancement mode operation, such as power management and switching circuits.

Details

DS18B20Z+T&R

Analog Devices

DS18B20Z+T&R by Analog Devices is a 12-bit temperature sensor with 1-Wire interface. It operates b/w -55 to 125°C, offering ±0.5°C accuracy. The sensor comes in a plastic package suitable for surface mount applications, with a max supply voltage of 5.5V and min of 3V.

Details

SMBJ18CA

Zowie Technology

TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

LL4148

Bkc Semiconductors

RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;

Details

LM358MX

Texas Instruments

LM358MX by Texas Instruments is a dual operational amplifier with a max input offset voltage of 9000 uV. It has a nominal voltage of 5V and a min voltage gain of 15000. This op amp is commonly used in applications requiring amplification and signal conditioning.

Details

LL4148

Itt Components

RECTIFIER DIODE; Surface Mount: YES; Maximum Reverse Recovery Time: .005 us; Config: SINGLE; Maximum Operating Temperature: 200 Cel; Maximum Non Repetitive Peak Forward Current: 1 A;

Details

08055C104KAT2A

KYOCERA AVX

08055C104KAT2A by KYOCERA AVX is a ceramic capacitor with 0.1uF capacitance and 50V rated DC voltage. It has X7R temperature characteristics, -55 to 125 °C operating range, and ±10% tolerance. Ideal for SMT applications requiring compact size and reliable performance in various electronic circuits.

Details

OHN3020U

Tt Electronics Plc

OHN3020U by Tt Electronics Plc is a magnetic field sensor with a max supply voltage of 24V and hysteresis of 5mT. It features an output range of 25mA and operates in temperatures ranging from -20 to 85°C. Ideal for applications requiring precise detection and measurement of magnetic fields, such as automotive sensors or industrial automation systems.

Details

LM358AN

Onsemi

OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;

Details

1N4148WS

Fairchild Semiconductor

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

SMBJ18CA

Microsemi

TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

2N7002

Taitron Components

N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Operating Mode: ENHANCEMENT MODE; Minimum DS Breakdown Voltage: 60 V; Package Shape: RECTANGULAR;

Details

2N2222A

SPC TECHNOLOGY/ MULTICOMP

NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;

Details

MC7805CTG

Onsemi

MC7805CTG by Onsemi is a fixed positive single output standard regulator with an output voltage of 5V and max current of 1A. It operates in temperatures ranging from 0 to 125°C, making it suitable for various applications requiring stable voltage regulation. The package style is flange mount with through-hole terminals, ensuring easy installation and reliability in diverse electronic designs.

Details

BSS138LT1G

Onsemi

BSS138LT1G by Onsemi is a N-CHANNEL FET with 50V DS Breakdown Voltage, 0.2A Drain Current, and 3.5 ohm On Resistance. Ideal for SWITCHING applications due to its ENHANCEMENT MODE operation and built-in DIODE. Operates b/w -55 to 150 °C with small outline package style for surface mount assembly.

Details

1N4148WT

Surge Components

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

SMBJ18CA

Goodwork Semiconductor

TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

SMBJ18CA

Transpro Electronics

TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; JESD-609 Code: e0; Terminal Finish: Tin/Lead (Sn/Pb); Nominal Breakdown Voltage: 21.1 V; Maximum Clamping Voltage: 29.2 V;

Details

B340A-13-F

SPC TECHNOLOGY/ MULTICOMP

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

LM358N

Motorola

OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;

Details

SI9986CY-T1-E3 Technical Details

TYPE	DESCRIPTION
Minimum Supply Voltage:	3.8 V
Package Body Material:	PLASTIC/EPOXY
Nominal Supply Voltage:	4.5 V
Maximum Seated Height:	1.75 mm
Surface Mount:	YES
Terminal Finish:	MATTE TIN
No. of Terminals:	8
Terminal Position:	DUAL
Package Style (Meter):	SMALL OUTLINE
JESD-30 Code:	R-PDSO-G8
Package Shape:	RECTANGULAR
Terminal Form:	GULL WING
Built-in Protections:	TRANSIENT
Maximum Operating Temperature:	70 Cel
Package Code:	SOP
Interface IC Type:	HALF BRIDGE BASED PERIPHERAL DRIVER
Width:	3.9 mm
Moisture Sensitivity Level (MSL):	1
Maximum Supply Voltage:	13.2 V
JESD-609 Code:	e3
Minimum Operating Temperature:	0 Cel
No. of Functions:	1
Qualification:	Not Qualified
Output Current Flow Direction:	SOURCE AND SINK
Length:	4.9 mm
Terminal Pitch:	1.27 mm
Temperature Grade:	COMMERCIAL

Category Top Products

L6202

STMicroelectronics

STMicroelectronics L6202 is a full bridge peripheral driver with 18 terminals, operating voltage range of 12-48V. It features built-in thermal protection and supports up to 5A output current flow in source and sink direction. Ideal for applications requiring true output polarity control and standard input characteristics.

AUIR2085STR

Infineon Technologies

AUIR2085STR by Infineon is a CMOS peripheral driver with 8 terminals, operating voltage of 10-15V. It offers built-in protections against transient, over current, and under voltage. Ideal for automotive applications due to AEC-Q100 screening and small outline package style.

L9822EPD013TR

STMicroelectronics

STMicroelectronics L9822EPD013TR is a SIPO-based peripheral driver with 20 terminals, operating voltage range of 4.75-5.25V, and built-in transient and overcurrent protections. Ideal for automotive applications, it offers a turn-on/off time of 10us and nominal output peak current limit of 1.05A.

ITS4075QEPDXUMA1

Infineon Technologies

ITS4075QEPDXUMA1 by Infineon Technologies is a Peripheral Driver with 4 functions, operating at supply voltages b/w 8V to 36V. It offers built-in protections against transient, over current, over voltage, thermal, and under voltage conditions. This small outline package with gull wing terminals is ideal for applications requiring a nominal output peak current limit of 2.6A.

MIC2981/82YN

Micrel

BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Temperature Grade: INDUSTRIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 18; Package Code: DIP; Package Shape: RECTANGULAR;

VNQ5050AKTR-E

STMicroelectronics

STMicroelectronics' VNQ5050AKTR-E is a 24-terminal peripheral driver with built-in protections for transient, over current, and over voltage. It operates within a supply voltage range of 4.5V to 36V and has a turn-on time of 20us. Ideal for applications requiring source output current flow direction in compact designs.

TPS22965NQWDSGRQ1

Texas Instruments

TPS22965NQWDSGRQ1 by Texas Instruments is a peripheral driver with 8 terminals, operating voltage range of 2.5V to 5.5V, and automotive temperature grade up to 125°C. It features built-in transient protection and sink output current flow direction, making it ideal for automotive applications requiring reliable performance in harsh environments.

ULN-2803LW

Sprague Electric

BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Temperature Grade: OTHER; Terminal Form: GULL WING; No. of Terminals: 18; Package Code: SOP; Package Shape: RECTANGULAR;

BTS7960BNTMA1

Infineon Technologies

BTS7960BNTMA1 by Infineon is a MOS technology-based peripheral driver with built-in protections for transient, over current, over voltage, thermal, and under voltage. It has a max supply voltage of 27.5V and nominal output peak current limit of 62A. Ideal for applications requiring a half bridge based peripheral driver with source and sink output current flow direction.

DRV103U

Texas Instruments

DRV103U by Texas Instruments is a peripheral driver with built-in protections for transient, over current, and thermal issues. It operates b/w -55 to 125 °C with a supply voltage range of 8-32 V. Ideal for military-grade applications requiring a small outline package style and NMOS technology.

IFX9201SGAUMA1

Infineon Technologies

IFX9201SGAUMA1 by Infineon is a 12-terminal peripheral driver with built-in protections for transient, over current, and over voltage. It operates b/w -40 to 125 °C with a supply voltage range of 8-36 V. Ideal for automotive applications due to its small outline package style and sink output current flow direction.

IR25600SPBF

International Rectifier

HALF BRIDGE BASED PERIPHERAL DRIVER; Temperature Grade: AUTOMOTIVE; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;

VNQ7040AYTR-E

STMicroelectronics

BUFFER OR INVERTER BASED PERIPHERAL DRIVER;

VN808TR-32-E

STMicroelectronics

STMicroelectronics' VN808TR-32-E is a peripheral driver with 8 functions, operating at 10.5-32V, suitable for automotive applications. It offers built-in protections against transient events, thermal issues, and under-voltage conditions. With a max output current of 0.5A and fast turn-on/off times of 100/150us, it is ideal for driving various loads in automotive systems.

MIC2026-1YM

Micrel

BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;

L293DWP

Unitrode

HALF BRIDGE BASED PERIPHERAL DRIVER; Terminal Form: GULL WING; No. of Terminals: 28; Package Shape: RECTANGULAR; No. of Functions: 2; Built-in Protections: THERMAL;

VND5160J-E

STMicroelectronics

VND5160J-E by STMicroelectronics is a peripheral driver with a max supply voltage of 36V. It has built-in protections for transient, over current, over voltage, thermal, and under voltage conditions. This compact CMOS technology driver is suitable for applications requiring buffer or inverter based peripheral drivers.

ITS4090QEPDXUMA1

Infineon Technologies

BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Terminal Finish: TIN; Moisture Sensitivity Level (MSL): 2A; JESD-609 Code: e3;

TPS22916BYFPR

Texas Instruments

TPS22916BYFPR by Texas Instruments is a 4-terminal peripheral driver with a supply voltage range of 1V to 5.5V. It offers transient protection, operates in industrial temperature range (-40°C to 85°C), and has a peak reflow temperature of 260°C. Ideal for buffer or inverter applications requiring source current flow direction.

SN75451BP

Motorola

AND GATE BASED PERIPHERAL DRIVER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;