Image shown is a representation only. Exact specifications should be obtained from the product data sheet.

BTS7960BNTMA1

Manufacturer

Infineon Technologies
Manufacturer's Part Number

BTS7960BNTMA1
Description

HALF BRIDGE BASED PERIPHERAL DRIVER; Terminal Form: GULL WING; No. of Terminals: 7; Package Code: TO-263; Package Shape: RECTANGULAR; Nominal Output Peak Current Limit: 62 A;
Datasheet

Datasheet

Not In Stock

Popular Products

BSS138

Micro Commercial Components

N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Package Shape: RECTANGULAR; Terminal Position: DUAL;

Details

ATMEGA328P-AU

Microchip Technology

ATMEGA328P-AU by Microchip: 8-bit RISC CPU, 20 MHz clock, 23 I/O lines. Ideal for industrial applications with SPI, TWI, USART connectivity and low power mode. Features include 2048 RAM bytes, 1024 EEPROM size, and 16384 ROM words.

Details

SS14

Bytesonic Electronics

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

ABS07-32.768KHZ-T

Abracon

Abracon ABS07-32.768KHZ-T crystal oscillator offers 20 ppm frequency tolerance, 144% stability, and 70000 ohm series resistance. Ideal for applications requiring 0.032768 MHz frequency precision in a compact surface-mount design with gold over nickel finish.

Details

FT232RL-REEL

FTDI

FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.

Details

ABS06-32.768KHZ-T

Abracon

Abracon's ABS06-32.768KHZ-T crystal oscillator offers 20 ppm frequency tolerance, 90000 ohm series resistance, and -40 to 85 °C operating temperature range. Ideal for applications requiring precise timing in compact designs like IoT devices and wearables.

Details

1N4148

NXP Semiconductors

RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;

Details

BSS138NH6327XTSA2

Infineon Technologies

BSS138NH6327XTSA2 by Infineon is a N-CHANNEL FET with 60V DS Breakdown Voltage, ideal for small signal applications. Operating in Enhancement Mode, it has 0.36W Power Dissipation and 3.5 ohm Drain-Source Resistance. With Gull Wing terminals and AEC-Q101 reference standard, it's suitable for automotive electronics due to its high temperature range of -55 to 150 °C.

Details

LM317AEMP/NOPB

Texas Instruments

LM317AEMP/NOPB by Texas Instruments is an adjustable positive single output standard regulator with a max output voltage of 37V and a max output current of 1.5A. It operates in temperatures ranging from -40°C to 125°C, making it suitable for various applications requiring precise voltage regulation in a compact package.

Details

DS18B20+

Analog Devices

DS18B20+ by Analog Devices is a 12-bit temperature sensor with 3.3/5V supply, -55 to 125°C range, and ±0.50°C accuracy. It features a 1-Wire interface for digital output and is commonly used in applications requiring precise temperature monitoring in various industries.

Details

LM7805CT

Texas Instruments

LM7805CT by Texas Instruments is a fixed positive single output standard regulator with an output voltage of 5V and max current of 1.5A. It operates b/w 0-125°C, has a dropout voltage of 2V, and offers excellent line/load regulation for various electronic applications.

Details

SMBJ18CA

Rectron

TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

SS14

Goodwork Semiconductor

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

LL4148

Itt Semiconductor

RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;

Details

1N4148

Wuxi Xuyang Electronic

RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;

Details

2N2222A

Tesla Elektronicke Soucastky

NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;

Details

261

Deltrol Controls

Other Relays;

Details

LM2931AZ-5.0RAG

Onsemi

LM2931AZ-5.0RAG by Onsemi is a Fixed Positive Single Output LDO Regulator with 5V nominal output voltage, 0.1A max output current, and 0.6V max dropout voltage. Ideal for applications requiring stable voltage regulation in temperature-sensitive environments up to 150°C.

Details

STM8S003F3P6TR

STMicroelectronics

STM8S003F3P6TR by STMicroelectronics is an 8-bit microcontroller with a max clock frequency of 16 MHz. It features 1024 RAM bytes, 128 data EEPROM size, and 5-ch 10-bit ADC channels. Ideal for industrial applications requiring low power mode and connectivity via I2C, SPI, and UART interfaces.

Details

1N5819HW-7-F

SPC TECHNOLOGY/ MULTICOMP

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

BTS7960BNTMA1 Technical Details

TYPE	DESCRIPTION
Minimum Supply Voltage:	5.5 V
Package Body Material:	PLASTIC/EPOXY
Nominal Supply Voltage:	8 V
Maximum Time At Peak Reflow Temperature (s):	NOT SPECIFIED
Surface Mount:	YES
No. of Terminals:	7
Terminal Position:	DUAL
Package Style (Meter):	SMALL OUTLINE
Technology:	MOS
JESD-30 Code:	R-PDSO-G7
Package Shape:	RECTANGULAR
Terminal Form:	GULL WING
Built-in Protections:	TRANSIENT; OVER CURRENT; OVER VOLTAGE; THERMAL; UNDER VOLTAGE
Package Code:	TO-263
Interface IC Type:	HALF BRIDGE BASED PERIPHERAL DRIVER
Width:	9.2 mm
Turn-off Time:	16 us
Maximum Supply Voltage:	27.5 V
Turn-on Time:	25.4 us
Nominal Output Peak Current Limit:	62 A
No. of Functions:	1
Qualification:	Not Qualified
Output Current Flow Direction:	SOURCE AND SINK
Length:	9.9 mm
Peak Reflow Temperature (C):	NOT SPECIFIED
Terminal Pitch:	1.27 mm

Category Top Products

VN800PS-E

STMicroelectronics

VN800PS-E by STMicroelectronics is a peripheral driver with built-in protections for transient, over voltage, thermal, and under voltage. It operates at supply voltages ranging from 8V to 36V and has a max output current of 0.7A. Ideal for applications requiring buffer or inverter based peripheral drivers with sink output current flow direction.

TPS22965NQWDSGTQ1

Texas Instruments

TPS22965NQWDSGTQ1 by Texas Instruments is a peripheral driver with 8 terminals, operating voltage range of 2.5V to 5.5V, and automotive temperature grade up to 125°C. It features built-in transient protection and sink output current flow direction. Ideal for automotive applications requiring compact design and high reliability in harsh environments.

MIC5841YWM

Micrel

SIPO BASED PERIPHERAL DRIVER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 18; Package Code: SOP; Package Shape: RECTANGULAR;

VNI4140K

STMicroelectronics

VNI4140K by STMicroelectronics is a 24V peripheral driver with 4 functions, built-in protections, and 1.3A output current limit. It comes in a small outline package with gull wing terminals for sink flow direction applications. Ideal for driving various peripherals in electronic systems requiring reliable protection and control features.

FPF2702MX

Onsemi

FPF2702MX by Onsemi is a peripheral driver with a supply voltage range of 2.8V to 36V, built-in protections for overcurrent and undervoltage, and operates in industrial temperature grades. It features a small outline package style with dual terminals and Gull Wing terminal form, making it suitable for buffer or inverter-based interface IC applications.

ISP742RIXT

Infineon Technologies

ISP742RIXT by Infineon Technologies is a Peripheral Driver with 8 terminals, offering built-in protections for over current, over voltage, and thermal issues. It operates b/w -30 to 85 °C with a supply voltage range of 5-34 V. Ideal for applications requiring buffer or inverter based peripheral drivers.

SN75451BDR

Texas Instruments

SN75451BDR by Texas Instruments is a peripheral driver with 2 functions, operating at 5V. It features open-collector output polarity and can handle a max output current of 0.5A. Ideal for applications requiring AND gate based peripheral drivers in commercial temperature grades.

BTS3134NHUMA1

Infineon Technologies

BTS3134NHUMA1 by Infineon is a MOS technology peripheral driver with built-in protections for transient, over current, and over voltage. It has 4 terminals in a small outline package style, with a nominal voltage of 12V and output peak current limit of 24A. Ideal for applications requiring sink output current flow direction and fast turn-on/off times of 100 us.

LMG1210RVRR

Texas Instruments

LMG1210RVRR by Texas Instruments is a peripheral driver with 2 channels, capable of handling a max output current of 3A. It operates in automotive-grade temperatures (-40 to 125°C) and has built-in thermal and under voltage protections. This chip carrier package with very thin profile is suitable for applications requiring fast turn-on/off times (0.018us) and source/sink current flow direction.

TPS274160BRLHR

Texas Instruments

TPS274160BRLHR by Texas Instruments is a peripheral driver with 4 functions, operating at 5-36V. It offers built-in protections for transient, over current, thermal, and under voltage conditions. Ideal for automotive applications due to its high side driver and standard input characteristics.

XSN6507DGQR

Texas Instruments

XSN6507DGQR by Texas Instruments is a peripheral driver with a max supply voltage of 36V and nominal output peak current limit of 1.3A. It operates in temperatures ranging from -55°C to 125°C, making it suitable for various industrial applications requiring high-performance buffer or inverter-based interface ICs.

BSP742RIXT

Infineon Technologies

BSP742RIXT by Infineon Technologies is a peripheral driver with built-in protections for transient, over current, and over voltage. It operates at a nominal voltage of 13.5 V and has a max supply voltage of 34 V. This small outline package is ideal for applications requiring sink output current flow direction.

BTT60101ERAXUMA1

Infineon Technologies

BTT60101ERAXUMA1 by Infineon Technologies is a peripheral driver with built-in protections for transient, over current, and over voltage. It operates at a nominal voltage of 28V and has a max supply voltage of 36V. With a turn-on time of 150us, it is commonly used in automotive applications due to its AEC-Q100 screening level.

FDC6331L

Onsemi

FDC6331L by Onsemi is a small outline, low profile peripheral driver with 6 terminals. It operates at a nominal voltage of 6.4V and has built-in transient protections. With a max output peak current limit of 9A, it is ideal for half bridge based applications requiring source and sink current flow control.

ULN-2801A

Vishay Sprague

Vishay Sprague's ULN-2801A is an 8-function peripheral driver with built-in transient protection. It operates b/w -20°C to 85°C, featuring open-collector output characteristics and a turn-on/off time of 1 us. Ideal for applications requiring sink current flow direction, this rectangular package style IC is commonly used in buffer or inverter-based interfaces.

DS2482S-800+

Analog Devices

DS2482S-800+ by Analog Devices is a peripheral driver with 8 functions, operating at 2.9V to 5.5V. It has a small outline package style and industrial temperature grade suitable for buffer or inverter-based applications in various electronic devices.

ULN-2803A

Sprague Electric

BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Temperature Grade: OTHER; Terminal Form: THROUGH-HOLE; No. of Terminals: 18; Package Code: DIP; Package Shape: RECTANGULAR;

ITS4141NHUMA1

Infineon Technologies

ITS4141NHUMA1 by Infineon Technologies is a Peripheral Driver with 4 terminals, MOS technology, and built-in protections. It operates b/w -30 to 85 °C with a supply voltage range of 12-45 V. Ideal for applications requiring buffer or inverter based peripheral drivers.

VNB14NV04-E

STMicroelectronics

VNB14NV04-E by STMicroelectronics is a peripheral driver with built-in protections against transient, over current, over voltage, and thermal issues. It has a max seated height of 4.826 mm and a width of 9.15 mm. This IC type is commonly used as a buffer or inverter based peripheral driver for various applications.

TPIC6595DWRG4

Texas Instruments

TPIC6595DWRG4 by Texas Instruments is an SIPO-based peripheral driver with 8 functions, 5V nominal voltage, and 0.5A max output current. It is designed for automotive applications, featuring built-in transient protections and operating temperature range of -40 to 125°C.