Image shown is a representation only. Exact specifications should be obtained from the product data sheet.

BTS723GWXUMA1

Manufacturer

Infineon Technologies
Manufacturer's Part Number

BTS723GWXUMA1
Description

BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Terminal Form: GULL WING; No. of Terminals: 14; Package Code: SOP; Package Shape: RECTANGULAR; Minimum Supply Voltage: 7 V;
Datasheet

Datasheet

Not In Stock

Popular Products

1N4148W-7-F

Multicomp Pro

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

ULN2803A

Vishay Intertechnology

NPN; Configuration: COMPLEX; Surface Mount: NO; Maximum Collector Current (IC): .5 A; Package Body Material: PLASTIC/EPOXY; JESD-30 Code: R-PDIP-T18;

Details

LM107H/883

Linear Technology

OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Technology: BIPOLAR;

Details

AB26TRB-32.768KHZ--T

Abracon

AB26TRB-32.768KHZ--T by Abracon is a crystal oscillator with 20 ppm frequency tolerance, 126% stability, and 35000 ohm series resistance. Ideal for applications requiring 0.032768 MHz nominal frequency in surface mount configurations.

Details

SMBJ18CA

Onsemi

TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

BSS138

Good-ark Electronics

N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain-Source On Resistance: 6 ohm; Minimum DS Breakdown Voltage: 50 V; Operating Mode: ENHANCEMENT MODE;

Details

LL4148

Weitron Technology

RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;

Details

BAV99

Nexperia

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

SBAV99LT1G

Onsemi

SBAV99LT1G by Onsemi is a rectifier diode with a max repetitive peak reverse voltage of 100V. It has a small outline package style and a fast max reverse recovery time of 0.006 us. It is commonly used in applications requiring low power dissipation and high operating temperatures.

Details

SMBJ18CA

Sensitron Semiconductor

TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

BAV99

Philips Semiconductors

RECTIFIER DIODE; Surface Mount: YES; Maximum Output Current: .1 A; Peak Reflow Temperature (C): 260; Terminal Finish: MATTE TIN; Maximum Reverse Recovery Time: .006 us;

Details

LM358N

National Semiconductor

OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;

Details

1N4148

ROHM

RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;

Details

KSZ9031RNXIC

Micrel

ETHERNET TRANSCEIVER; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 48; Package Code: HVQCCN; Package Shape: SQUARE;

Details

OHN3140U

Tt Electronics Plc

OHN3140U by Tt Electronics Plc is a magnetic field sensor with a max supply voltage of 24V and hysteresis of 2mT. It features an output range of 25mA and operates b/w -20 to 85°C. Ideal for applications requiring precise detection and measurement of magnetic fields in various industries.

Details

SS14

Meritek Electronics

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

LM358N

Taejin Technology

OPERATIONAL AMPLIFIER; Temperature Grade: AUTOMOTIVE; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;

Details

MMBT3904-7-F

Diodes Incorporated

Diodes Inc. MMBT3904-7-F is a NPN BJT transistor for switching applications. Features include VCEsat of 0.3V, hFE of 30, and IC of 0.2A. With a max operating temp of 150°C, it's ideal for small outline SMT designs in automotive electronics.

Details

1N4148

Laube Technology

RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;

Details

1N4148WS

Rectron

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

BTS723GWXUMA1 Technical Details

TYPE	DESCRIPTION
Minimum Supply Voltage:	7 V
Package Body Material:	PLASTIC/EPOXY
Nominal Supply Voltage:	24 V
Maximum Time At Peak Reflow Temperature (s):	40
Maximum Seated Height:	1.75 mm
Surface Mount:	YES
Terminal Finish:	TIN
No. of Terminals:	14
Terminal Position:	DUAL
Package Style (Meter):	SMALL OUTLINE
JESD-30 Code:	R-PDSO-G14
Package Shape:	RECTANGULAR
Terminal Form:	GULL WING
Built-in Protections:	TRANSIENT; OVER CURRENT; OVER VOLTAGE; THERMAL; UNDER VOLTAGE
Package Code:	SOP
Interface IC Type:	BUFFER OR INVERTER BASED PERIPHERAL DRIVER
Width:	4 mm
Turn-off Time:	95 us
Moisture Sensitivity Level (MSL):	3
Maximum Supply Voltage:	58 V
Turn-on Time:	55 us
Nominal Output Peak Current Limit:	4.2 A
JESD-609 Code:	e3
No. of Functions:	2
Qualification:	Not Qualified
Output Current Flow Direction:	SINK
Length:	8.75 mm
Peak Reflow Temperature (C):	260
Terminal Pitch:	1.27 mm

Category Top Products

ITS41K0SMENHUMA1

Infineon Technologies

BUFFER OR INVERTER BASED PERIPHERAL DRIVER; JESD-609 Code: e3; Moisture Sensitivity Level (MSL): 3; Terminal Finish: TIN;

LM3525MX-H/NOPB

National Semiconductor

BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;

ULN-2804A

Sprague Electric

ULN-2804A by Sprague Electric is an 8-bit peripheral driver with open-collector output and transient protection. It operates at 50V, has 18 terminals, and a ceramic-metal-sealed co-fired package. Ideal for buffering or inverting signals in various electronic applications.

IRS21850SPBF

Infineon Technologies

IRS21850SPBF by Infineon is a CMOS peripheral driver with 8 terminals in a small outline package. It operates b/w -40 to 125 °C and has built-in transient and under voltage protections. Ideal for automotive applications, it features a max supply voltage of 20 V and turn-on/off time of 0.21 us.

DRV103HG3

Texas Instruments

DRV103HG3 by Texas Instruments is a peripheral driver with built-in protections for transient, over current, and thermal issues. It operates at supply voltages ranging from 8V to 24V and has a max output peak current limit of 3.5A. This NMOS technology-based driver is ideal for applications requiring buffer or inverter based peripheral drivers in military-grade temperature environments.

NCV8402AMNWT1G

Onsemi

BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Peak Reflow Temperature (C): 260; Maximum Time At Peak Reflow Temperature (s): 30; JESD-609 Code: e3; Moisture Sensitivity Level (MSL): 1; Terminal Finish: MATTE TIN;

BTS428L2ATMA1

Infineon Technologies

BTS428L2ATMA1 by Infineon is a 4-terminal peripheral driver with built-in protections for transient, over current, and over voltage. It operates at a nominal voltage of 12V with a max of 41V. With a turn-on/off time of 200us, it's ideal for applications requiring a sink output current flow direction in small outline packages.

VND600SPTR-E

STMicroelectronics

VND600SPTR-E by STMicroelectronics is a 2-function peripheral driver with built-in protections. It operates b/w -40 to 150 °C, with a supply voltage range of 5.5-36 V. Ideal for automotive applications due to its small outline and source current flow direction.

ULN-2065B

Vishay Sprague

Vishay Sprague's ULN-2065B is a 16-terminal peripheral driver with 4 functions. It features open-collector output, transient protection, and operates b/w -20°C to 85°C. Ideal for applications requiring buffer or inverter-based interface ICs with sink current flow direction.

TPS22916BYFPT

Texas Instruments

TPS22916BYFPT by Texas Instruments is a peripheral driver with max supply voltage of 5.5V, min supply voltage of 1V, and industrial temp grade. It features built-in transient protections and is ideal for buffer or inverter based applications requiring source output current flow direction.

L293DWPG4

Texas Instruments

L293DWPG4 by Texas Instruments is a peripheral driver with a max supply voltage of 7V. It has 2 functions and built-in protections for transient and thermal issues. This IC type is commonly used as a half bridge-based peripheral driver for various applications.

EL7156CSZ-T7

Intersil

HALF BRIDGE BASED PERIPHERAL DRIVER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;

IRS2184SPBF

International Rectifier

HALF BRIDGE BASED PERIPHERAL DRIVER; Temperature Grade: AUTOMOTIVE; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;

NCV8402ASTT1G

Onsemi

NCV8402ASTT1G by Onsemi is a small outline peripheral driver with built-in protections against transient, over current, and over voltage. It has a nominal output peak current limit of 4.8A and interface IC type as buffer or inverter based. Ideal for applications requiring sink output current flow direction in automotive electronics.

HCPL-316J

Hewlett Packard

BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 16; Package Shape: RECTANGULAR; JESD-30 Code: R-PDSO-G16;

A2982SLW-T

Allegro MicroSystems

Allegro MicroSystems' A2982SLW-T is a peripheral driver with 8 functions, operating voltage range of 5-50V, and max output current of 0.35A. Ideal for applications requiring transient protection, it features a small outline package style and Gull Wing terminal form.

AUIR2085STR

International Rectifier

HALF BRIDGE BASED PERIPHERAL DRIVER; Temperature Grade: AUTOMOTIVE; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;

VNQ7040AYTR-E

STMicroelectronics

BUFFER OR INVERTER BASED PERIPHERAL DRIVER;

FPF2108

Onsemi

FPF2108 by Onsemi is a MOS technology-based peripheral driver with built-in protections for transient, over current, over voltage, thermal, and under voltage. It operates b/w -40 to 85 °C with a supply voltage range of 1.8-5.5 V and max output current of 0.8 A. Ideal for industrial applications requiring a compact form factor and source flow direction.

ITS4075QEPDXUMA1

Infineon Technologies

ITS4075QEPDXUMA1 by Infineon Technologies is a Peripheral Driver with 4 functions, operating at supply voltages b/w 8V to 36V. It offers built-in protections against transient, over current, over voltage, thermal, and under voltage conditions. This small outline package with gull wing terminals is ideal for applications requiring a nominal output peak current limit of 2.6A.