Image shown is a representation only. Exact specifications should be obtained from the product data sheet.

BTS443P

Manufacturer

Infineon Technologies
Manufacturer's Part Number

BTS443P
Description

BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Terminal Form: GULL WING; No. of Terminals: 4; Package Code: TO-252; Package Shape: RECTANGULAR; No. of Functions: 1;
Datasheet

Datasheet

Not In Stock

Popular Products

BAV99

National Semiconductor

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

LFXTAL025159REEL

Iqd Frequency Products

LFXTAL025159REEL by IQD Frequency Products is a 32.768 kHz crystal oscillator with 20 ppm frequency tolerance and 40,000 ohm series resistance. It is ideal for applications requiring precise timekeeping, such as real-time clocks in IoT devices or microcontrollers in wearables. The surface-mount design with a drive level of 1 uW makes it suitable for compact electronic systems.

Details

ABS10-32.768KHZ-T

Abracon

Abracon's ABS10-32.768KHZ-T crystal oscillator offers 20 ppm frequency tolerance, 122% stability, and 70000 ohm series resistance. Ideal for applications requiring precise timing at 0.032768 MHz, such as IoT devices and wearables due to its compact size and low power consumption.

Details

2N7002

Sinyork

N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Operating Temperature: 85 Cel; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR; Operating Mode: ENHANCEMENT MODE;

Details

LAN8720A-CP-TR

Microchip Technology

LAN8720A-CP-TR by Microchip: Ethernet transceiver with 100 Mbps data rate, operates at 3.3V, and consumes 54mA max supply current. Ideal for network interfaces in commercial applications due to its small size (4x4mm) and low power consumption.

Details

LL4148

Sinyork

RECTIFIER DIODE; Surface Mount: YES; Config: SINGLE; No. of Phases: 1; No. of Elements: 1; Maximum Repetitive Peak Reverse Voltage: 100 V;

Details

SMBJ18CA

Lite-on Semiconductor

TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

FDV304P

Fairchild Semiconductor

P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Moisture Sensitivity Level (MSL): 1; Maximum Drain Current (ID): .46 A;

Details

1N4148

Gulf Semiconductor

RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;

Details

BAV99

Shanghai Lunsure Electronic Technology

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

GRM155R71H103KA88D

Murata Manufacturing

The Murata Manufacturing GRM155R71H103KA88D is a ceramic capacitor with 0.01uF capacitance and 50V rated DC voltage. It has X7R temperature characteristics, -55 to 125°C operating range, and ±10% tolerance. Ideal for surface mount applications in electronics requiring compact size and high reliability.

Details

BSS138W-7-F

Multicomp Pro

N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Transistor Element Material: SILICON; No. of Elements: 1;

Details

1N4148

Semiconductors

RECTIFIER DIODE; Surface Mount: NO; Maximum Repetitive Peak Reverse Voltage: 100 V; Config: SINGLE; No. of Phases: 1; No. of Elements: 1;

Details

M24308/2-1F

Amphenol

D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Body or Shell Style: RECEPTACLE; Body Length: 1.228 inch; No. of Rows Loaded: 2;

Details

BSS138

Onsemi

N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Package Shape: RECTANGULAR; Terminal Finish: Matte Tin (Sn) - annealed;

Details

1N4148WS

Daco Semiconductor

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

B340A-13-F

Diodes Incorporated

B340A-13-F by Diodes Inc. is a Schottky rectifier diode with 40V reverse test voltage, 3A max output current, and 0.5V max forward voltage. It is used for efficiency applications in electronics due to its small outline package and high operating temperature range of -55°C to 150°C.

Details

SMBJ18CA

First Components International

TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Maximum Clamping Voltage: 29.2 V; Nominal Breakdown Voltage: 21.1 V; Polarity: BIDIRECTIONAL; Maximum Repetitive Peak Reverse Voltage: 18 V;

Details

EU2B-YS3103F

Idec

ROTARY SWITCH;

Details

LL4148

General Semiconductor

RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;

Details

BTS443P Technical Details

TYPE	DESCRIPTION
Minimum Supply Voltage:	5 V
Package Body Material:	PLASTIC/EPOXY
Nominal Supply Voltage:	12 V
Maximum Seated Height:	2.5 mm
Sub-Category:	Peripheral Drivers
Surface Mount:	YES
Terminal Finish:	TIN
No. of Terminals:	4
Terminal Position:	SINGLE
Package Style (Meter):	SMALL OUTLINE
Screening Level:	AEC-Q100
Technology:	MOS
JESD-30 Code:	R-PSSO-G4
Package Shape:	RECTANGULAR
Terminal Form:	GULL WING
Built-in Protections:	TRANSIENT; OVER CURRENT; OVER VOLTAGE; THERMAL; UNDER VOLTAGE
Package Code:	TO-252
Interface IC Type:	BUFFER OR INVERTER BASED PERIPHERAL DRIVER
Width:	6.22 mm
Turn-off Time:	410 us
Moisture Sensitivity Level (MSL):	3
Driver No. of Bits:	1
Maximum Supply Voltage:	36 V
Turn-on Time:	410 us
Nominal Output Peak Current Limit:	7.6 A
JESD-609 Code:	e3
No. of Functions:	1
Qualification:	Not Qualified
Package Equivalence Code:	SMSIP5H,.37,50TB
Output Current Flow Direction:	SINK
Length:	6.5 mm
Terminal Pitch:	1.14 mm
Power Supplies (V):	12

Category Top Products

FPF2116

Onsemi

FPF2116 by Onsemi is a peripheral driver with a max supply voltage of 5.5V and built-in protections for transient, over current, thermal, and under voltage. It has 5 terminals in a small outline package style suitable for industrial applications requiring a nominal output peak current limit of 0.3A.

MCZ33996EK

NXP Semiconductors

MCZ33996EK by NXP Semiconductors is a SIPO-based peripheral driver with 32 terminals, operating voltage range of 5-27V, and built-in protections against over/under voltage. Widely used in automotive applications due to its small outline package, thermal protection, and sink output current flow direction.

VNS3NV04DPTR-E

STMicroelectronics

VNS3NV04DPTR-E by STMicroelectronics is a peripheral driver with 2 functions, built-in thermal and overvoltage protections. It has 8 terminals, GULL WING form, and can handle a peak current limit of 5A. Ideal for applications requiring sink output flow direction and fast turn-on time of 1.35us.

IRS21844MTRPBF

Infineon Technologies

IRS21844MTRPBF by Infineon is a peripheral driver with 20V max supply voltage, 15V power supplies, and -40 to 125°C operating temp. Ideal for automotive applications, it features built-in transient protection, 0.9us turn-on time, and 2.3A output current limit for half-bridge based systems.

FSFR2100XSL

Onsemi

FSFR2100XSL by Onsemi is a half bridge based peripheral driver with 9 terminals in a rectangular package. It offers over current, over voltage, and thermal protections. Ideal for applications requiring source and sink output current flow direction control.

MIC5841YN

Microchip Technology

MIC5841YN by Microchip Technology is an 8-bit SIPO-based peripheral driver with inverted output polarity. It operates at a nominal voltage of 5V and has a max supply current of 16mA. Ideal for industrial applications, it offers built-in transient protections and sink output current flow direction.

IR25600SPBF

Infineon Technologies

IR25600SPBF by Infineon is a CMOS half bridge peripheral driver with 8 terminals, operating at -40 to 125 °C. It has a supply voltage of 15V and is designed for automotive applications due to its moisture sensitivity level of 2.

VND7050AJTR-E

STMicroelectronics

VND7050AJTR-E by STMicroelectronics is a 16-terminal peripheral driver with built-in protections for transient, over current, and over voltage. It operates b/w 4-28 V with turn-on/off times of 120/100 us. Ideal for applications requiring sink output current flow direction in a compact rectangular package.

BTS432E2E3062A

Siemens

BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Terminal Form: GULL WING; No. of Terminals: 4; Package Shape: RECTANGULAR; Built-in Protections: OVER CURRENT; OVER VOLTAGE; THERMAL; UNDER VOLTAGE; Package Style (Meter): SMALL OUTLINE;

BTT60101ERBXUMA1

Infineon Technologies

BTT60101ERBXUMA1 by Infineon Technologies is a peripheral driver with 14 terminals and built-in protections for transient, over current, over voltage, thermal, and under voltage. It operates at a max supply voltage of 36V and nominal output peak current limit of 9A. Ideal for applications requiring buffer or inverter based peripheral drivers in automotive electronics due to AEC-Q100 screening level.

TPS22964CYZPR

Texas Instruments

TPS22964CYZPR by Texas Instruments is a 6-terminal peripheral driver with built-in transient protection. It features a very thin profile, fine pitch grid array package style and operates in industrial temperature range (-40 to 85°C). Ideal for applications requiring sink output current flow direction.

TPS1H200AQDGNRQ1

Texas Instruments

TPS1H200AQDGNRQ1 by Texas Instruments is a high side driver with 40V max supply voltage, 4V min supply voltage, and 125°C max operating temp. Ideal for automotive applications due to AEC-Q100 screening level and built-in protections against transient, over current, and thermal issues.

BTS409L1E3062ABUMA1

Infineon Technologies

BTS409L1E3062ABUMA1 by Infineon is a 6-terminal peripheral driver with built-in protections. It operates at a supply voltage range of 5-34 V and has a nominal output peak current limit of 7.5 A. Widely used in applications requiring source flow direction, such as automotive systems for efficient power management.

FAN7391MX

Fairchild Semiconductor

HALF BRIDGE BASED PERIPHERAL DRIVER; Temperature Grade: AUTOMOTIVE; Terminal Form: GULL WING; No. of Terminals: 14; Package Code: SOP; Package Shape: RECTANGULAR;

VNB14N04

STMicroelectronics

VNB14N04 by STMicroelectronics is a MOS technology peripheral driver with built-in protections for transient, over current, and thermal issues. It features an open-drain output polarity with a nominal output peak current limit of 14A. This small outline package is ideal for applications requiring buffer or inverter based interface ICs.

MIC5891YWM

Micrel

SIPO BASED PERIPHERAL DRIVER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 16; Package Code: SOP; Package Shape: RECTANGULAR;

VN5050J-E

STMicroelectronics

STMicroelectronics' VN5050J-E is a peripheral driver with 12 terminals and built-in protections. It operates on power supplies ranging from 8V to 36V, making it suitable for various applications requiring buffer or inverter-based interface ICs. The compact rectangular package with a low profile and gull wing terminal form makes it ideal for space-constrained designs.

BTS442E2E3062A

Infineon Technologies

BTS442E2E3062A by Infineon is a MOS technology peripheral driver with 4.5-42V supply, 70A output current limit, and built-in protections. It has a small outline package style for surface mount applications. Ideal for controlling high-power loads in automotive and industrial systems.

ITS4100SSJNXUMA1

Infineon Technologies

ITS4100SSJNXUMA1 by Infineon Technologies is a Peripheral Driver with 8 terminals, operating voltage range of 5-34V. Ideal for automotive applications, it offers built-in protections against transient, over current and over voltage. Package style is small outline with Gull Wing terminal form.

VN750B5TR-E

STMicroelectronics

STMicroelectronics' VN750B5TR-E is a 5-terminal peripheral driver with built-in protections for transient, over current, and over voltage. It operates at supply voltages ranging from 8V to 36V and can handle a max output current of 2A. Ideal for applications requiring buffer or inverter-based peripheral drivers with sink output current flow direction.