Image shown is a representation only. Exact specifications should be obtained from the product data sheet.

BTS441TGNTMA1

Manufacturer

Infineon Technologies
Manufacturer's Part Number

BTS441TGNTMA1
Description

BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Terminal Form: GULL WING; No. of Terminals: 4; Package Code: TO-263; Package Shape: RECTANGULAR; Width: 9.25 mm;
Datasheet

Datasheet

Not In Stock

Popular Products

MBRS130LT3G

Onsemi

MBRS130LT3G by Onsemi is a Schottky rectifier diode with a max output current of 1A and forward voltage of 0.445V. It operates b/w -65 to 125°C, has a reverse test voltage of 30V, and is ideal for power applications due to its small outline package style.

Details

FDV303N

Onsemi

FDV303N by Onsemi is a N-CHANNEL FET with 25V DS Breakdown Voltage, 0.68A Drain Current, and 0.45 ohm On Resistance. Ideal for SWITCHING applications, it operates in ENHANCEMENT MODE at temperatures ranging from -55 to 150°C. Package style is SMALL OUTLINE with GULL WING terminals for surface mount assembly.

Details

SDR0604-101KL

Bourns

SDR0604-101KL by Bourns is a surface mount fixed inductor with a nominal inductance of 100 uH. It is a general purpose inductor suitable for power applications, with a max rated current of 0.52 A and a self-resonance frequency of 9 MHz.

Details

2N7002

Philips Semiconductors

N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Moisture Sensitivity Level (MSL): 1; Maximum Operating Temperature: 150 Cel;

Details

1N4148

STMicroelectronics

RECTIFIER DIODE; Surface Mount: NO; Maximum Output Current: .15 A; Maximum Operating Temperature: 200 Cel; Config: SINGLE; Terminal Finish: Tin/Lead (Sn/Pb);

Details

SMBJ18CA

General Instrument

TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

LM358N

NXP Semiconductors

OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;

Details

LM317T

Sgs-ates Componenti Electronici S P A

Other Regulators; No. of Terminals: 3; JESD-609 Code: e0; Terminal Position: SINGLE; Adjustability: ADJUSTABLE; Maximum Load Regulation (%): 1.5 %;

Details

USB2514BI-AEZG

Microchip Technology

USB2514BI-AEZG by Microchip is a BUS CONTROLLER IC with 36 terminals, operating at 3.3V, supporting I2C, SMBUS, and USB buses. It has a clock frequency of up to 24MHz and can withstand industrial temperatures from -40°C to 85°C. This chip carrier package is surface mountable and suitable for various applications requiring USB connectivity.

Details

LM555CM

National Semiconductor

PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;

Details

BAV99

Transys Electronics

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

BSS138

Weitron Technology

N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .225 W; Terminal Form: GULL WING; Terminal Position: DUAL;

Details

1N4148WT

Surge Components

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

2N2222A

NXP Semiconductors

NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; Maximum Operating Temperature: 150 Cel;

Details

BAV99

Daco Semiconductor

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

M39029/56-351

Itt Cannon

CONNECTOR ACCESSORY; MIL Conformity: YES; Terminal Type: WIRE; IEC Conformity: NO; Alternate Contact Sources: ITT CANNON; Associated Military - Specifications: MIL-C-38999;

Details

2N7002

Zetex Plc

N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Peak Reflow Temperature (C): 260; Package Shape: RECTANGULAR;

Details

CRGCQ0805F10K

TE Connectivity

TE Connectivity's CRGCQ0805F10K is a 10000 ohm fixed resistor with 1% tolerance. It operates b/w -55 to 155 °C and has a power dissipation of 0.125 W. Ideal for surface mount applications in automotive electronics due to AEC-Q200 standard compliance.

Details

SS14

Jgd Semiconductors

RECTIFIER DIODE; Surface Mount: YES; Technology: SCHOTTKY; Maximum Non Repetitive Peak Forward Current: 30 A; Maximum Forward Voltage (VF): .55 V; No. of Phases: 1;

Details

LM317T

Bay Linear

Other Regulators; No. of Terminals: 3; No. of Outputs: 1; Surface Mount: NO; Maximum Load Regulation (%): 1.5 %; Operating Temperature (TJ-Min): 0 Cel;

Details

BTS441TGNTMA1 Technical Details

TYPE	DESCRIPTION
Minimum Supply Voltage:	4.75 V
Package Body Material:	PLASTIC/EPOXY
Nominal Supply Voltage:	12 V
Maximum Supply Voltage:	43 V
Turn-on Time:	200 us
Nominal Output Peak Current Limit:	21 A
Surface Mount:	YES
No. of Functions:	1
No. of Terminals:	4
Qualification:	Not Qualified
Terminal Position:	SINGLE
Package Style (Meter):	SMALL OUTLINE
Output Current Flow Direction:	SINK
Length:	10 mm
JESD-30 Code:	R-PSSO-G4
Package Shape:	RECTANGULAR
Terminal Form:	GULL WING
Built-in Protections:	TRANSIENT; OVER CURRENT; OVER VOLTAGE; THERMAL
Package Code:	TO-263
Interface IC Type:	BUFFER OR INVERTER BASED PERIPHERAL DRIVER
Width:	9.25 mm
Terminal Pitch:	1.7 mm
Turn-off Time:	250 us

Category Top Products

TBD62083AFNG,EL

Toshiba

Toshiba's TBD62083AFNG,EL is an 8-function peripheral driver with built-in transient protection. It operates in industrial temperature range (-40 to 85 °C) and has a small outline package style. Ideal for applications requiring sink output current flow direction and true output polarity.

FPF2108

Onsemi

FPF2108 by Onsemi is a MOS technology-based peripheral driver with built-in protections for transient, over current, over voltage, thermal, and under voltage. It operates b/w -40 to 85 °C with a supply voltage range of 1.8-5.5 V and max output current of 0.8 A. Ideal for industrial applications requiring a compact form factor and source flow direction.

UCC23513DWYR

Texas Instruments

UCC23513DWYR by Texas Instruments is a peripheral driver with built-in transient and under voltage protections. It operates in industrial temperature range (-40 to 115°C) and can handle a max output current of 4.5A. With Schmitt trigger input characteristics, it serves as a buffer or inverter based peripheral driver for various applications.

IR2085STRPBF

International Rectifier

HALF BRIDGE BASED PERIPHERAL DRIVER; Temperature Grade: AUTOMOTIVE; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;

DS2482S-800/T&R

Maxim Integrated

DS2482S-800/T&R by Maxim Integrated is a peripheral driver with 8 functions, operating voltage range of 2.9V to 5.5V, and industrial temperature grade (-40°C to 85°C). It is used for buffer or inverter-based interface IC applications requiring a small outline package style and source current flow direction.

VN340SPTR-E

STMicroelectronics

VN340SPTR-E by STMicroelectronics is a peripheral driver with 4 functions, operating at supply voltages of 10-36V. It offers built-in protections against transient, thermal, and under voltage conditions. This small outline driver has a max output current of 0.7A and is ideal for buffer or inverter-based interface IC applications.

VNS3NV04DTR-E

STMicroelectronics

VNS3NV04DTR-E by STMicroelectronics is a peripheral driver with 2 functions, 8 terminals, and built-in protections against transient, over current, over voltage, and thermal issues. It operates at supply voltages ranging from 13V to 30V and has a peak output current limit of 5A. This small outline package driver is ideal for applications requiring fast turn-on time of 1.35us and source/sink output current flow direction.

TPS22965NQWDSGRQ1

Texas Instruments

TPS22965NQWDSGRQ1 by Texas Instruments is a peripheral driver with 8 terminals, operating voltage range of 2.5V to 5.5V, and automotive temperature grade up to 125°C. It features built-in transient protection and sink output current flow direction, making it ideal for automotive applications requiring reliable performance in harsh environments.

BTS6143DXT/G

Infineon Technologies

BUFFER OR INVERTER BASED PERIPHERAL DRIVER;

DS2482S-800+

Maxim Integrated

BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 16; Package Code: SOP; Package Shape: RECTANGULAR;

NCV8461DR2G

Onsemi

NCV8461DR2G by Onsemi is a peripheral driver with built-in protections for transient, over current, over voltage, thermal, and under voltage. It operates at a max supply voltage of 34V and has a max output current of 2A. This interface IC type is ideal for applications requiring sink output current flow direction in automotive electronics.

AUIR2085STR

Infineon Technologies

AUIR2085STR by Infineon is a CMOS peripheral driver with 8 terminals, operating voltage of 10-15V. It offers built-in protections against transient, over current, and under voltage. Ideal for automotive applications due to AEC-Q100 screening and small outline package style.

IRS2181SPBF

Infineon Technologies

IRS2181SPBF by Infineon Technologies is a peripheral driver with 8 terminals and built-in transient & under voltage protections. It operates b/w -40 to 125 °C, with a supply voltage range of 10-20 V. Ideal for automotive applications due to its small outline package style and CMOS technology.

VN750B5-E

STMicroelectronics

STMicroelectronics' VN750B5-E is a 5-terminal peripheral driver with built-in protections for transient, over current, and over voltage. It operates at supply voltages ranging from 8V to 36V and has a max output current of 2A. Ideal for applications requiring sink output current flow direction in compact spaces.

VN751STR

STMicroelectronics

VN751STR by STMicroelectronics is a peripheral driver with a max supply voltage of 36V and built-in transient protections. It operates in automotive-grade temperatures, has a nominal output peak current limit of 2.7A, and is ideal for buffer or inverter-based applications requiring a source flow direction.

ULN2803AN

Motorola

Peripheral Drivers; Temperature Grade: OTHER; Terminal Form: THROUGH-HOLE; No. of Terminals: 18; Package Code: DIP; Package Shape: RECTANGULAR;

TPS22810DBVT

Texas Instruments

TPS22810DBVT by Texas Instruments is a 6-terminal peripheral driver with max supply voltage of 18V and output current of 2A. It operates in industrial temperature range, offers transient protection, and suits buffer or inverter-based applications. The small outline package is ideal for space-constrained designs.

BSP77E6433HUMA1

Infineon Technologies

BSP77E6433HUMA1 by Infineon is a MOS technology-based peripheral driver with built-in protections for transient, over current, and over voltage. It operates at an industrial temperature grade range from -40 to 85°C, with a nominal voltage of 12V and output peak current limit of 2.8A. This rectangular-shaped device in small outline package is suitable for applications requiring sink output current flow direction.

UDN-2981A

Sprague Electric

Peripheral Drivers; Temperature Grade: OTHER; Terminal Form: THROUGH-HOLE; No. of Terminals: 18; Package Code: DIP; Package Shape: RECTANGULAR;

BTT60302EKAXUMA1

Infineon Technologies

Infineon's BTT60302EKAXUMA1 is a 14-terminal peripheral driver with built-in protections for transient, over current, and over voltage. It operates at supply voltages ranging from 8V to 36V and has a nominal output peak current limit of 4A. This rectangular package is ideal for automotive applications requiring a small outline, low profile design with sink output flow direction.