Image shown is a representation only. Exact specifications should be obtained from the product data sheet.

BSP452

Manufacturer

Infineon Technologies
Manufacturer's Part Number

BSP452
Description

BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Terminal Form: GULL WING; No. of Terminals: 4; Package Code: SOP; Package Shape: RECTANGULAR; Minimum Supply Voltage: 5 V;
Datasheet

Datasheet

Not In Stock

Popular Products

1N4148

Weitron Technology

RECTIFIER DIODE; Surface Mount: NO; Maximum Reverse Recovery Time: .004 us; Config: SINGLE; Maximum Output Current: .15 A; Terminal Finish: Tin/Lead (Sn/Pb);

Details

SS14

Meritek Electronics

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

LL4148

Synsemi

RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;

Details

PIC18F4550-I/PT

Microchip Technology

PIC18F4550-I/PT by Microchip: 8-bit microcontroller with 44 terminals, 48 MHz clock frequency, and USB connectivity. Ideal for industrial applications requiring low power mode and 10-bit ADC channels.

Details

STM32F405RGT6TR

STMicroelectronics

STM32F405RGT6TR by STMicroelectronics is a 32-bit microcontroller with 64 terminals, operating at a max frequency of 26 MHz. It features DAC and ADC channels, along with DMA support. Ideal for industrial applications requiring low power consumption and high-speed processing capabilities.

Details

CRCW04020000Z0ED

Vishay Intertechnology

Vishay Intertechnology's CRCW04020000Z0ED is a 0 ohm jumper resistor with METAL GLAZE/THICK FILM tech. Operating b/w -55 to 155 °C, it suits SMT applications in automotive electronics due to AEC-Q200 compliance and 0.063 W power dissipation.

Details

LM358DT

STMicroelectronics

LM358DT by STMicroelectronics is a dual operational amplifier with a max input offset voltage of 9000 uV. It operates at a nominal voltage of 5V and has a min voltage gain of 25000. This amplifier is commonly used in applications requiring high precision and low power consumption.

Details

SN65HVD234DR

Texas Instruments

SN65HVD234DR by Texas Instruments is an 8-terminal interface circuit with a data rate of 1 Mbps. Operating temperature ranges from -40 to 125 °C, making it ideal for automotive applications. With a supply voltage of 3.3 V and low current draw of 6 mA, it's suitable for network interfaces in compact designs.

Details

FDC5614P

TAIZHOU ELECTRONICS CO LTD

P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 1.92 W; Maximum Operating Temperature: 150 Cel; Package Body Material: PLASTIC/EPOXY;

Details

LM555CMX

Fairchild Semiconductor

PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;

Details

SMBJ18CA

STMicroelectronics

TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

1N4148WS

Surge Components

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

BAV99

Hitano Enterprise

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

2N7002

NXP Semiconductors

N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .83 W; JESD-609 Code: e3; Minimum DS Breakdown Voltage: 60 V;

Details

DS18B20U+

Maxim Integrated

TEMPERATURE SENSOR,SWITCH/DIGITAL OUTPUT,SERIAL; Mounting Feature: SURFACE MOUNT; No. of Terminals: 8; Package Shape or Style: SQUARE; Housing: PLASTIC; Minimum Supply Voltage: 3 V;

Details

M24308/2-1F

Tyco Electronics Amp

D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; IEC Conformity: NO; Mixed Contacts: NO; Empty Shell: NO;

Details

LM317T

Linear Technology

ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; Operating Temperature (TJ-Min): 0 Cel; No. of Functions: 1; JESD-609 Code: e0;

Details

L7805CV

STMicroelectronics

L7805CV by STMicroelectronics is a fixed positive single output standard regulator with an output voltage of 5V and max current of 1.5A. It operates in temperatures ranging from 0 to 125°C, making it suitable for various applications requiring stable voltage regulation in electronic circuits.

Details

SS14

Goodwork Semiconductor

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

1N4148WT

Continental Device India

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

BSP452 Technical Details

TYPE	DESCRIPTION
Minimum Supply Voltage:	5 V
Package Body Material:	PLASTIC/EPOXY
Nominal Supply Voltage:	13.5 V
Maximum Seated Height:	1.8 mm
Sub-Category:	MOSFET Drivers
Surface Mount:	YES
Maximum Supply Current:	1.6 mA
Terminal Finish:	TIN
No. of Terminals:	4
Terminal Position:	DUAL
Package Style (Meter):	SMALL OUTLINE
Screening Level:	AEC-Q100
Technology:	MOS
JESD-30 Code:	R-PDSO-G4
Package Shape:	RECTANGULAR
Terminal Form:	GULL WING
Built-in Protections:	OVER CURRENT; OVER VOLTAGE; UNDER VOLTAGE; TRANSIENT
Package Code:	SOP
Interface IC Type:	BUFFER OR INVERTER BASED PERIPHERAL DRIVER
Width:	3.5 mm
Turn-off Time:	150 us
Moisture Sensitivity Level (MSL):	3
Maximum Supply Voltage:	34 V
Turn-on Time:	100 us
Nominal Output Peak Current Limit:	.7 A
JESD-609 Code:	e3
No. of Functions:	1
Qualification:	Not Qualified
Package Equivalence Code:	SOT-223
Output Current Flow Direction:	SINK
Length:	6.5 mm
Peak Reflow Temperature (C):	260
Terminal Pitch:	2.3 mm

Category Top Products

ITS4200SMEOHUMA1

Infineon Technologies

BUFFER OR INVERTER BASED PERIPHERAL DRIVER; JESD-609 Code: e3; Moisture Sensitivity Level (MSL): 3; Terminal Finish: TIN;

TPS22916CNYFPR

Texas Instruments

TPS22916CNYFPR by Texas Instruments is a peripheral driver with max supply voltage of 5.5V, min supply voltage of 1V, and industrial temp grade. It has built-in transient protections and is ideal for buffer or inverter based applications requiring source current flow direction.

TPS272C45ARHFR

Texas Instruments

TPS272C45ARHFR by Texas Instruments is a peripheral driver with 2 functions, operating at 6-36V. It offers built-in protections against transient, over current, and over voltage. Ideal for automotive applications due to its high side driver and low turn-on/off times.

XLMG1210RVRT

Texas Instruments

XLMG1210RVRT by Texas Instruments is a peripheral driver with max supply voltage of 5.25V, thermal protection, and 19 terminals. Ideal for automotive applications, it has a turn-on time of 0.018us and operates b/w -40 to 125 °C.

TPIC6273DWRG4

Texas Instruments

TPIC6273DWRG4 by Texas Instruments is a latch-based peripheral driver with 8 channels, 2A output peak current limit, and inverted output polarity. It operates in automotive-grade temperatures (-40 to 125°C) and has built-in transient protections. Ideal for applications requiring open-drain outputs such as automotive electronics.

MAX845ESA-T

Maxim Integrated

MAX845ESA-T by Maxim Integrated is an 8-terminal peripheral driver with a supply voltage range of 4.5V to 5.5V, suitable for industrial applications. It features a peak current limit of 1A, Gull Wing terminal form, and operates in temperatures from -40°C to 85°C. Ideal for buffer or inverter-based systems requiring source and sink output current flow control.

E-L6201PSTR

STMicroelectronics

STMicroelectronics E-L6201PSTR is a full-bridge peripheral driver with 20 terminals. It operates b/w 12V to 48V, offering built-in thermal protection. Utilized in applications requiring source and sink current flow control, it features BCDMOS technology in a compact rectangular package.

MCZ33996EKR2

NXP Semiconductors

MCZ33996EKR2 by NXP Semiconductors is a SIPO-based peripheral driver with built-in protections for over current, over voltage, thermal, and under voltage. It operates at supply voltages ranging from 5V to 27V and has a max output current of 1.2A. Widely used in automotive applications due to its small outline package style and sink output current flow direction.

IRS2186STRPBF

Infineon Technologies

IRS2186STRPBF by Infineon Technologies is a peripheral driver with a max supply voltage of 20V. It is used in automotive applications and offers built-in protections against transients and under voltage. Its turn-on and turn-off time is 0.25us, making it suitable for fast switching operations.

ULN2004A

Allegro MicroSystems

BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Terminal Form: THROUGH-HOLE; No. of Terminals: 16; Package Code: DIP; Package Shape: RECTANGULAR; JESD-30 Code: R-PDIP-T16;

BTS428L2ATMA1

Infineon Technologies

BTS428L2ATMA1 by Infineon is a 4-terminal peripheral driver with built-in protections for transient, over current, and over voltage. It operates at a nominal voltage of 12V with a max of 41V. With a turn-on/off time of 200us, it's ideal for applications requiring a sink output current flow direction in small outline packages.

VN5016AJ-E

STMicroelectronics

STMicroelectronics' VN5016AJ-E is a peripheral driver with 36V max supply voltage, built-in protections, and 12 terminals. It features CMOS technology, 0.8mm terminal pitch, and SOURCE output current flow direction. Ideal for BUFFER OR INVERTER BASED applications in various industries due to its compact size and robust design.

L6201PSTR

STMicroelectronics

L6201PSTR by STMicroelectronics is a full bridge peripheral driver with 1A output current, 48V max supply voltage, and built-in transient protection. It is ideal for applications requiring source and sink output current flow direction in a compact small outline package.

VND5050AJ-E

STMicroelectronics

VND5050AJ-E by STMicroelectronics is a peripheral driver with 12 terminals, operating voltage range of 4.5-36 V, and built-in protections against various faults. It features a small outline package style suitable for compact designs. Ideal for applications requiring source output current flow direction and interface IC type as buffer or inverter based peripheral driver.

ISO1H815GAUMA1

Infineon Technologies

ISO1H815GAUMA1 by Infineon Technologies is a 36-terminal peripheral driver with 1.2A output current and 4.4A peak current limit. It features a half-bridge interface, sink output flow direction, and operates on power supplies of 3.3/5V to 15/30V. Ideal for applications requiring precise control in compact designs.

BTS3408G

Infineon Technologies

BTS3408G by Infineon is a MOS technology peripheral driver with 60V max supply voltage, built-in protections for transient, over current, and over voltage. It has 8 terminals in small outline package style suitable for automotive applications meeting AEC-Q100 standards.

BSP75NXT

Infineon Technologies

BSP75NXT by Infineon Technologies is a small outline peripheral driver with built-in protections for transient, over current, and over voltage. It operates at 12V nominal voltage with a 0.7A output peak current limit. Ideal for applications requiring sink output current flow direction and fast turn-on/off times of 20us.

DS2482S-800+

Maxim Integrated

BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 16; Package Code: SOP; Package Shape: RECTANGULAR;

TLE7230RAUMA1

Infineon Technologies

TLE7230RAUMA1 by Infineon is a peripheral driver with 36 terminals, built-in protections for transient, over current, and over voltage. It operates at a supply voltage range of 4.5V to 5.5V and has a turn-on/off time of 60us. Ideal for applications requiring buffer or inverter based peripheral drivers in compact spaces due to its small outline package style.

BTS452RATMA1

Infineon Technologies

BTS452RATMA1 by Infineon Technologies is a small outline peripheral driver with 4 terminals. It has built-in protections for transient, over current, and over voltage. With a max supply voltage of 52V, it is suitable for various applications requiring source and sink output current flow direction.