Image shown is a representation only. Exact specifications should be obtained from the product data sheet.

M22759/11-22-5

Manufacturer

Harbour Industries
Manufacturer's Part Number

M22759/11-22-5
Description

WIRE AND CABLE; Rated Voltage: 600 V; Shielding: NO; Cross Section Area: .326 mm2; Diameter: 1.245 mm; Maximum Operating Temperature: 200 Cel;
Datasheet

Not In Stock

Popular Products

1N4148

Itt Semiconductor

RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;

Details

1N4148WS

Rochester Electronics

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

SMBJ18CA

Bourns

TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

1N4148WS

Rugao Dachang Electronic

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

1N4148WT

Jiangsu Changjiang Electronics Technology

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

261

Deltrol Controls

Other Relays;

Details

SS14

Forward International Electronics

RECTIFIER DIODE; Surface Mount: YES; Maximum Operating Temperature: 150 Cel; No. of Elements: 1; No. of Phases: 1; Maximum Output Current: 1 A;

Details

LM358MX

Texas Instruments

LM358MX by Texas Instruments is a dual operational amplifier with a max input offset voltage of 9000 uV. It has a nominal voltage of 5V and a min voltage gain of 15000. This op amp is commonly used in applications requiring amplification and signal conditioning.

Details

SMBJ18CA

Eic Semiconductor

TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

FSMLF327

Fox Electronics

FSMLF327 by Fox Electronics is a crystal oscillator with 20 ppm frequency tolerance, 144% stability, and 50000 ohm series resistance. Ideal for applications requiring precise timing such as communication systems, industrial automation, and consumer electronics. Operating temperature range from -40 to 85 °C.

Details

2N2222A

Semitronics

NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;

Details

FDN306P

Fairchild Semiconductor

P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .5 W; Maximum Drain Current (Abs) (ID): 2.6 A; Operating Mode: ENHANCEMENT MODE;

Details

ABS25-32.768KHZ-1-T

Abracon

Abracon's ABS25-32.768KHZ-1-T crystal oscillator offers 10 ppm frequency tolerance, 126% stability, and 50000 ohm series resistance. Ideal for applications requiring 0.032768 MHz nominal operating frequency, such as IoT devices and precision timing systems.

Details

2N2222A

Bharat Electronics

NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;

Details

2N2222A

Tt Electronics Plc

NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Collector Current (IC): .8 A; JESD-30 Code: O-MBCY-W3;

Details

LM317T

STMicroelectronics

ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: TO-220; Terminal Form: THROUGH-HOLE; JESD-30 Code: R-XSFM-T3; Minimum Input-Output Voltage Differential: 3 V;

Details

0462-201-16141

TE Connectivity

TE Connectivity's 0462-201-16141 is a CRIMP terminal with MACHINED contact design. It operates b/w -55 to 125 °C, suitable for wire gauges from 20 to 16 AWG. With a rated current of 13A, it is ideal for applications requiring FEMALE ROUND PIN-SOCKET contacts.

Details

1N4148

International Components

RECTIFIER DIODE; Surface Mount: NO; No. of Elements: 1; Terminal Finish: Tin/Lead (Sn/Pb); JESD-609 Code: e0; Maximum Reverse Recovery Time: .004 us;

Details

2N7002

Nexperia

N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .83 W; No. of Elements: 1; Transistor Application: SWITCHING;

Details

BSS138

Good-ark Electronics

N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain-Source On Resistance: 6 ohm; Minimum DS Breakdown Voltage: 50 V; Operating Mode: ENHANCEMENT MODE;

Details

M22759/11-22-5 Technical Details

TYPE	DESCRIPTION
Wire Gauge (AWG):	22
Construction:	STRANDED
Approvals (V):	MIL-W-22759
Shielding:	NO
Rated Voltage:	600 V
Cross Section Area:	.326 mm2
Conductor Finish:	SILVER
Resistance:	.05 ohm
Wire & Cable Name:	FLEXIBLE CORD AND FIXTURE WIRE
Connector Accessory Type:	WIRE AND CABLE
Insulator Material:	EXTRUDED TFE
No. of Conductors:	1
Conductor Material:	COPPER
Maximum Operating Temperature:	200 Cel
Stranding:	19X34
Diameter:	1.245 mm

Category Top Products

TCSD-10-D-04.00-01-N

Samtec

CABLE ASSEMBLY; Connector Side-1: SOCKET; Connector Side-2: SOCKET; Rated Voltage: 300 V; Rated Current: 2.8 A; Shielding: NO;

M22759/11-22-0

Belden

Belden's M22759/11-22-0 wire is MIL-W-22759 approved with 600V rating, suitable for internal wiring in electronics. Features silver-coated copper alloy conductor, PTFE insulation, and can operate up to 200°C. Stranded construction with 19X34 stranding and 0.326 mm2 cross-section area make it a flexible cord and fixture wire choice.

88732-9200

Molex

Molex 88732-9200 is a shielded communication cable with 28 AWG wire gauge, 4.7mm diameter, and 1.994mm length. It features USB A to USB B connectors, rated for 1A current with 4 conductors. Ideal for high-speed data transfer applications in electronics and IT industries.

83264

Belden

Belden 83264 is a flexible cord with 4 copper conductors, rated for 30V and operating temperatures from -40 to 90°C. Featuring M12 male and female connectors, it is ideal for electrical applications requiring DIN and IEC conformity.

97946061000

Belden

WIRE AND CABLE;

M22759/32-18-93

Defense Logistics Agency

M22759/32-18-93 by Defense Logistics Agency is a MIL-approved stranded wire with 600V rating, copper conductor, and crosslinked modified ETFE insulation. It has a max temp of 150°C, AWG 18 gauge, and 19x30 stranding. Ideal for applications requiring flexible cord and fixture wire.

5201

Quabbin Wire & Cable

WIRE AND CABLE; Rated Voltage: 300 V; Shielding: NO; DIN Conformity: NO; No. of Conductors: 4; Length: 100 mm;

115101-22-24.00

Amphenol

CABLE ASSEMBLY;

9509060500

Belden

WIRE AND CABLE;

2147501032

Molex

CABLE ASSEMBLY;

A-MCSP-80010/B-R

Assmann Wsw Components

A-MCSP-80010/B-R by Assmann Wsw Components is an electrical cable with PVC jacket, shielding, 26 AWG wire gauge, and 5.2mm diameter. It features RJ45 connectors on both sides with 8 conductors. Ideal for high-speed data transmission in networking applications.

22759/43-16-9

TE Connectivity

TE Connectivity's 22759/43-16-9 cable is a flexible cord with 600V rating, silver finish conductor, and copper alloy material. With -65 to 200 °C operating range, it suits MIL-DTL-22759 applications requiring 16 AWG wire gauge for various electrical connections.

M22759/18-26-9

Defense Logistics Agency

M22759/18-26-9 by Defense Logistics Agency is a MIL-approved stranded wire with 600V rating, ETFE insulation, and copper conductor. It is a flexible cord and fixture wire suitable for applications requiring high temperature resistance up to 150°C.

5855/7WH005

Alpha Wire

Alpha Wire 5855/7WH005 is a stranded wire with silver finish, TFE insulator, and copper conductor. It has a rated voltage of 600V and operates b/w -60 to 200°C. Ideal for electronic, medical, and military applications due to its MIL approval.

M22759/11-22-2

Belden

WIRE AND CABLE; Rated Voltage: 600 V; Shielding: NO; Construction: STRANDED; Application: FOR INTERNAL WIRING OF ELECTRONIC AND ELECTRICAL EQUIPMENT; Wire Gauge (AWG): 22;

44A0111-20-1

TE Connectivity

TE Connectivity's 44A0111-20-1 is a stranded electrical wire with 600V rating, TIN finish, and copper alloy conductor. With a temperature range of -65 to 150°C, it is ideal for flexible cord and fixture wire applications requiring 20 AWG wire gauge.

CS-DSPMDB25MF-006

Amphenol

CABLE ASSEMBLY;

797580014

Molex

CABLE ASSEMBLY; Connector Side-1: TERMINAL; Connector Side-2: TERMINAL; Shielding: NO; MIL Conformity: NO; DIN Conformity: NO;

T4052114003-001

TE Connectivity

TE Connectivity's T4052114003-001 is a 24 AWG communication cable with PVC insulation, suitable for 60V DC applications. It features a copper alloy conductor, rated for 3A current and has a diameter of 4.5mm. Ideal for low voltage communication systems requiring reliable signal transmission.

P586-006-HDMI

Tripp Lite

CABLE ASSEMBLY;