Image shown is a representation only. Exact specifications should be obtained from the product data sheet.

135101-04-M1.00

Manufacturer

Amphenol
Manufacturer's Part Number

135101-04-M1.00
Description

CABLE ASSEMBLY;
Datasheet

Datasheet

Not In Stock

Popular Products

SMBJ18CA

Diodes Incorporated

TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

DP83848IVVX/NOPB

Texas Instruments

Texas Instruments DP83848IVVX/NOPB is a 3.3V Ethernet transceiver with 100000 Mbps data rate, suitable for industrial applications. It features CMOS technology, operates b/w -40 to 85 °C, and comes in a low profile flatpack package with matte tin finish.

Details

LM7805CT

National Semiconductor

FIXED POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: TO-220; Terminal Form: THROUGH-HOLE; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 5 %;

Details

BAV99

Weitron Technology

RECTIFIER DIODE; Surface Mount: YES; Maximum Operating Temperature: 150 Cel; Maximum Output Current: .215 A; JESD-609 Code: e0; Maximum Forward Voltage (VF): .715 V;

Details

BSS138BKW,115

NXP Semiconductors

NXP Semiconductors' BSS138BKW,115 is a N-CHANNEL FET with 60V DS breakdown voltage and 0.32A ID. Ideal for SWITCHING applications, it features a built-in diode, 1.6 ohm RDS(on), and operates in ENHANCEMENT MODE. Suitable for surface mount with GULL WING terminals, it meets AEC-Q101 standards.

Details

2N2222A

Hi-tron Semiconductor

NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;

Details

SS14

Sensitron Semiconductor

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

CRCW06031K00FKEAHP

Vishay Intertechnology

Vishay Intertechnology's CRCW06031K00FKEAHP is a fixed resistor with 1000 ohm resistance, 1% tolerance, and 0.33 W power dissipation. Ideal for surface mount applications in automotive electronics due to AEC-Q200 standard compliance and operating voltage of 75 V.

Details

SS14

Micro Commercial Components

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

2N2222A

Solid State Devices

NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;

Details

BAV99

Bytesonic Electronics

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

BAT54SLT1G

Onsemi

BAT54SLT1G by Onsemi is a fast recovery Schottky diode with 2 elements in series connected configuration. It has a max reverse recovery time of 0.005 us and a max forward voltage of 0.8 V. Ideal for applications requiring high-speed rectification, it operates b/w -55 to 150 °C and can handle a max output current of 0.2 A.

Details

2N7002

Telcom Semiconductor

N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Maximum Operating Temperature: 150 Cel; JESD-609 Code: e0;

Details

SS14

Microsemi

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

1N4148

Sun Wai Electronic

RECTIFIER DIODE; Surface Mount: NO; Maximum Output Current: .15 A; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Reverse Recovery Time: .004 us; Maximum Repetitive Peak Reverse Voltage: 100 V;

Details

1N4148WT

Good-ark Electronics

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

BAV99

Good-ark Electronics

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

EU2B-YS2J03F

Idec

ROTARY SWITCH;

Details

2N7002

NXP Semiconductors

N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .83 W; JESD-609 Code: e3; Minimum DS Breakdown Voltage: 60 V;

Details

1N4148

Daco Semiconductor

RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;

Details

135101-04-M1.00 Technical Details

TYPE	DESCRIPTION
Connector Accessory Type:	CABLE ASSEMBLY

Category Top Products

M100-006-WH

Tripp Lite

CABLE ASSEMBLY;

U3A00057-2M

L-com

CABLE ASSEMBLY;

151661034

Molex

Molex 151661034 flat cable with UL approval, rated for 60V and -40 to 105°C. Features tin finish copper alloy conductor, polyester insulator, and 33 conductors of AWG 37. Ideal for electrical wiring applications requiring a max current of 0.35A in limited space environments.

M16878/6BDE-9

Carlisle Interconnect Technologies

M16878/6BDE-9 by Carlisle Interconnect Technologies is a MIL-approved stranded wire with silver finish, PTFE insulation, and copper conductor. It operates b/w -55 to 200 °C and has a resistance of 0.126 ohm. Ideal for flexible cord and fixture wire applications due to its construction and rated voltage of 250 V.

3365/15100

3m Electronic Products Division

WIRE AND CABLE;

30028

Helukabel

WIRE AND CABLE; Rated Voltage: 450 V; Shielding: NO; DIN Conformity: NO; Cross Section Area: 25 mm2; MIL Conformity: NO;

U.FL-2LP-088K1T-A-(100)

Hirose Electric

U.FL-2LP-088K1T-A-(100) by Hirose Electric is a stranded electrical wire with a fluorinated ethylene propylene jacket and shielding. It has a rated voltage of 60V and is commonly used in wireless transmission devices and electronic measuring devices.

CAU3AB-1M

Infinite Electronics International

CABLE ASSEMBLY;

M16878/6BDE-9

Weico Wire & Cable

WIRE AND CABLE; Rated Voltage: 250 V; Shielding: NO; Minimum Operating Temperature: -60 Cel; Length: 30.48 mm; Maximum Operating Temperature: 200 Cel;

24363

Helukabel

WIRE AND CABLE;

3365/26

3m Electronic Products Division

The 3m Electronic Products Division's 3365/26 is a UL-approved FLAT FLEXIBLE CABLE with 26 conductors of TINNED COPPER. Featuring STRANDED construction, it has a rated voltage of 300V and operates b/w -20°C to 105°C. Ideal for electrical wiring applications requiring flexibility and durability in various environments.

93900601000

Belden

WIRE AND CABLE;

M22759/34-16-9

TE Connectivity

TE Connectivity's M22759/34-16-9 is a 600V rated wire with TIN finish, ideal for applications requiring flexibility. With a temperature range of -65 to 150°C, this 16 AWG wire features copper alloy conductor and MIL-DTL-22759 cable type. Suitable for various electrical wiring needs.

88732-8902

Molex

Molex 88732-8902 cable features shielding, rated voltage of 30V, and insulator material polyester. It is a USB A 2.0 MALE to USB MINI-B MALE cable with 5 conductors, suitable for applications requiring a current rating of 1A.

2273126-4

TE Connectivity

TE Connectivity 2273126-4 is a 22 AWG communication cable with a rated voltage of 24V and max operating temp of 80°C. Ideal for applications requiring a current rating of up to 4A, this cable has a diameter of 4.7mm and length of 1.5mm, suitable for various electrical wiring needs.

M16878/4-BJE-9

Anixter

WIRE AND CABLE; Rated Voltage: 600 V; Shielding: NO; Application: CABLING; Conductor Finish: SILVER; Wire & Cable Name: FLEXIBLE CORD AND FIXTURE WIRE;

M27500-20SD2T23

TE Connectivity

TE Connectivity's M27500-20SD2T23 is a 600V rated cable with TIN finish, suitable for temperatures ranging from -65°C to 150°C. Featuring a copper alloy conductor and 20 AWG wire gauge, it is ideal for applications requiring MIL-DTL-27500 cables such as flexible cords and fixture wires.

CAB.011

Taoglas

Taoglas CAB.011 cable features stranded construction with FEP jacket and shielding, rated for 30V. Ideal for applications requiring high temperature resistance up to 105°C, it has a copper conductor finished in silver, UL approval, and connectors IPEX MHFI to SMA(F).

IDMD-07-D-05.00-T

Samtec

Samtec IDMD-07-D-05.00-T is a 425V rated flat cable with 14 conductors, each made of TIN-finished copper alloy. Featuring PVC insulation and a temperature range of -20 to 105°C, it is ideal for electrical wiring applications requiring a max current of 3A.

3206-5

Weico Wire & Cable

Weico Wire & Cable 3206-5 is a CSA/UL approved stranded wire with tinned copper conductor. With a rated voltage of 600V, it has PVC insulation and operates b/w -40°C to 105°C. This flexible cord and fixture wire in AWG 6 gauge is ideal for electrical applications requiring durability and flexibility.