Image shown is a representation only. Exact specifications should be obtained from the product data sheet.

DFLZ8V2-7

Manufacturer

Diodes Incorporated
Manufacturer's Part Number

DFLZ8V2-7
Description

ZENER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Datasheet

Datasheet

Not In Stock

Popular Products

LM358AN

Texas Instruments

LM358AN by Texas Instruments is an Operational Amplifier with 2 functions. It has a Max Input Offset Voltage of 5000 uV and Nominal Common Mode Reject Ratio of 85 dB. Widely used in voltage-feedback applications due to its high Min Voltage Gain of 15000 and Unity Gain Bandwidth of 1000 kHz.

Details

OPA2227UA

Texas Instruments

OPA2227UA by Texas Instruments is a dual operational amplifier with low-offset voltage of 200 uV and bias current of 0.01 uA. It operates at temperatures ranging from -40 to 85 °C, making it suitable for industrial applications requiring precise signal amplification. With a unity gain bandwidth of 8000 kHz, this op amp is ideal for high-frequency circuit designs.

Details

FT232RL-REEL

FTDI

FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.

Details

BAV99WT1G

Fairchild Semiconductor

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

BSS123,215

Nexperia

N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Moisture Sensitivity Level (MSL): 1; No. of Terminals: 3; Maximum Time At Peak Reflow Temperature (s): 30;

Details

BSS138

Infineon Technologies

N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Maximum Drain Current (Abs) (ID): .2 A; Maximum Feedback Capacitance (Crss): 8 pF;

Details

MBR1560CT

General Instrument

MBR1560CT by General Instrument is a common cathode rectifier diode with a max forward voltage of 0.75V and max output current of 15A. It is used for efficiency applications, has a package shape of rectangular, and can operate in temperatures ranging from -65 to 150 °C.

Details

KSZ9031RNXIC

Microchip Technology

KSZ9031RNXIC by Microchip Technology is a network interface chip with 1 transceiver. It operates at a data rate of 1000 Mbps and has a nominal voltage of 1.2V. This chip is commonly used in industrial applications requiring Ethernet connectivity.

Details

1N4148

Digitron Semiconductors

RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;

Details

C0603X104K5RACAUTO

KEMET Corporation

C0603X104K5RACAUTO by KEMET Corp is a ceramic capacitor with capacitance of 0.1 uF and rated DC voltage of 50 V. It has a temperature coefficient of 15% and can operate b/w -55 to 125 °C. This SMT package is commonly used in automotive applications due to its AEC-Q200 reference standard.

Details

4554

Jw Miller Magnetics

Other Semiconductors;

Details

1N4148WS

Promax-johnton

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

2N2222A

Baneasa S A

NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Collector Current (IC): .8 A; Qualification: Not Qualified;

Details

2N7002

NXP Semiconductors

N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .83 W; JESD-609 Code: e3; Minimum DS Breakdown Voltage: 60 V;

Details

BSS123NH6327XTSA1

Infineon Technologies

Infineon BSS123NH6327XTSA1 is a N-CHANNEL FET with 100V DS breakdown voltage, 0.19A ID, and 6 ohm RDS(on). Ideal for small outline applications requiring high drain current and low on-resistance. AEC-Q101 compliant for automotive use.

Details

LM317AEMP/NOPB

National Semiconductor

ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: SOP; Terminal Form: GULL WING; Qualification Status: Not Qualified; Width: 3.56 mm;

Details

SMBJ18CA

Transpro Electronics

TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; JESD-609 Code: e0; Terminal Finish: Tin/Lead (Sn/Pb); Nominal Breakdown Voltage: 21.1 V; Maximum Clamping Voltage: 29.2 V;

Details

2N7002

Weitron Technology

N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Terminal Finish: TIN LEAD; Maximum Operating Temperature: 150 Cel;

Details

BSS123,215

NXP Semiconductors

NXP Semiconductors' BSS123,215 is a N-CHANNEL FET for SWITCHING applications. Features include 100V DS Breakdown Voltage, 0.17A Drain Current, and 6 ohm On Resistance. With GULL WING terminals and ENHANCEMENT MODE operation, it's ideal for small outline packages in various electronic devices.

Details

DS18B20U+

Analog Devices

DS18B20U+ by Analog Devices is a 12-bit temperature sensor with 1-Wire interface. It operates b/w -55 to 125°C, offering ±0.5°C accuracy. Suitable for applications requiring digital output and surface mounting feature.

Details

DFLZ8V2-7 Technical Details

TYPE	DESCRIPTION
Package Body Material:	PLASTIC/EPOXY
Maximum Time At Peak Reflow Temperature (s):	30
Working Test Current:	100 mA
Config:	SINGLE
Diode Type:	ZENER DIODE
Sub-Category:	Voltage Reference Diodes
Surface Mount:	YES
Terminal Finish:	MATTE TIN
No. of Terminals:	2
Terminal Position:	DUAL
Package Style (Meter):	SMALL OUTLINE
Technology:	ZENER
JESD-30 Code:	R-PDSO-F2
No. of Elements:	1
Package Shape:	RECTANGULAR
Terminal Form:	FLAT
Polarity:	UNIDIRECTIONAL
Maximum Operating Temperature:	150 Cel
Case Connection:	CATHODE
Maximum Dynamic Impedance:	1 ohm
Moisture Sensitivity Level (MSL):	1
Other Names:	DFLZ8V27 DFLZ8V2DIDKR DFLZ8V2DICT DFLZ8V2DITR
JESD-609 Code:	e3
Minimum Operating Temperature:	-55 Cel
Maximum Voltage Tolerance:	6.1 %
Diode Element Material:	SILICON
Qualification:	Not Qualified
Nominal Reference Voltage:	8.2 V
Maximum Power Dissipation:	1 W
Additional Features:	HIGH RELIABILITY
Peak Reflow Temperature (C):	260

Category Top Products

1N5337B

Semitron

ZENER DIODE; Surface Mount: NO; Nominal Reference Voltage: 4.7 V; No. of Elements: 1; Maximum Voltage Tolerance: 5 %; Config: SINGLE;

SZ1SMB5929BT3G

Onsemi

SZ1SMB5929BT3G by Onsemi is a Zener diode with 15V nominal reference voltage, 5% max voltage tolerance, and 9 ohm max dynamic impedance. It is used in automotive applications due to AEC-Q101 standard compliance and can operate b/w -65°C to 150°C, making it suitable for various temperature conditions.

MM3Z15VST1G

Onsemi

MM3Z15VST1G by Onsemi is a Zener diode with a nominal reference voltage of 15V and max power dissipation of 0.3W. It operates in temperatures ranging from -65°C to 150°C, making it suitable for various applications requiring precise voltage regulation in compact electronic devices due to its small outline package style and gull wing terminal form.

BZX84-C3V3,235

Nexperia

ZENER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;

BZX84C12

Won-top Electronics

ZENER DIODE; Surface Mount: YES; Maximum Voltage Tolerance: 5 %; Maximum Dynamic Impedance: 25 ohm; Moisture Sensitivity Level (MSL): 1; No. of Elements: 1;

BZX84C5V6

Vishay Intertechnology

Vishay Intertechnology's BZX84C5V6 Zener Diode has a nominal reference voltage of 5.6V, max power dissipation of 0.3W, and max operating temperature of 150°C. Ideal for applications requiring precise voltage regulation in compact electronic devices due to its small outline package style and unidirectional polarity.

1N5338B

General Semiconductor

ZENER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;

MM3Z18VT1G

Onsemi

MM3Z18VT1G by Onsemi is a Zener diode with a 18V nominal reference voltage, ideal for voltage regulation in electronic circuits. It has a max reverse current of 0.05 uA and operates b/w -65 to 150 °C, making it suitable for various temperature conditions. With a small outline package style and gull wing terminal form, it is designed for surface mount applications requiring precise voltage control.

BZX84-C5V6

Nexperia

ZENER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;

BZX84C3V3

Excel (Suzhou) Semiconductor

ZENER DIODE; Surface Mount: YES; Working Test Current: 5 mA; No. of Elements: 1; Maximum Dynamic Impedance: 95 ohm; Maximum Power Dissipation: .41 W;

1N4741ATR

Central Semiconductor

ZENER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;

BZX84C4V7

Vishay Sprague

ZENER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;

BZX84C4V7

Formosa Microsemi

ZENER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;

BZX84C12

Bytesonic Electronics

ZENER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;

BZX84C5V1

Sensitron Semiconductor

ZENER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;

BZV55C12

Synsemi

ZENER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;

1N4741A

Excel (Suzhou) Semiconductor

ZENER DIODE; Surface Mount: NO; Config: SINGLE; Maximum Operating Temperature: 200 Cel; Nominal Reference Voltage: 11 V; Working Test Current: 23 mA;

BZX84C4V7

Central Semiconductor

ZENER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;

SZBZX84C10LT1G

Onsemi

SZBZX84C10LT1G by Onsemi is a Zener diode with 10V nominal reference voltage, 6% max voltage tolerance, and 20 ohm max dynamic impedance. It is ideal for applications requiring precise voltage regulation in automotive electronics, consumer electronics, and industrial equipment.

MMSZ5231B-T

Rectron

ZENER DIODE; Surface Mount: YES; Maximum Voltage Tolerance: 5 %; Terminal Finish: MATTE TIN; Maximum Operating Temperature: 150 Cel; Maximum Power Dissipation: .5 W;