Image shown is a representation only. Exact specifications should be obtained from the product data sheet.

BZX84-C5V1

Manufacturer

Nexperia
Manufacturer's Part Number

BZX84-C5V1
Description

ZENER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
Datasheet

Datasheet

Not In Stock

Popular Products

ULN2803A

Rochester Electronics

NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; Additional Features: LOGIC LEVEL COMPATIBLE; Qualification: Not Qualified;

Details

2N7002

Formosa Microsemi

N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .225 W; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR; Maximum Drain Current (Abs) (ID): .115 A;

Details

RC0603JR-070RL

Yageo

Yageo's RC0603JR-070RL is a SMT fixed resistor with 0 ohm resistance, rated for temperatures from -55 to 155 °C. Its metal glaze/thick film technology and 0.1 W power dissipation make it ideal for jumper applications in various electronic devices.

Details

LM107H

Raytheon Semiconductor

OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Low-Offset: NO;

Details

FT232RL-REEL

FTDI

FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.

Details

BAV99

Allegro MicroSystems

RECTIFIER DIODE; Terminal Position: END; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

1N4148

Continental Device India

RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;

Details

2N7002

Nexperia

N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .83 W; No. of Elements: 1; Transistor Application: SWITCHING;

Details

2N7002

Silicon Standard

N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): .225 W; Maximum Drain-Source On Resistance: 7.5 ohm; Transistor Element Material: SILICON;

Details

MBRS1100T3G

Onsemi

MBRS1100T3G by Onsemi is a Schottky rectifier diode with a max output current of 1A and forward voltage of 0.75V. It operates in temperatures ranging from -65 to 175°C, making it suitable for power applications. With a reverse test voltage of 100V, this diode is ideal for high-power circuits requiring efficient rectification.

Details

1N4148WS

Jiangsu Changjiang Electronics Technology

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

OPA2277UA/2K5

Burr-Brown Corporation

OPERATIONAL AMPLIFIER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;

Details

SMBJ18CA

KYOCERA AVX

TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

LM107H

Intersil

OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Nominal Common Mode Reject Ratio: 96 dB;

Details

2N7002

Supertex

N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; No. of Elements: 1; Maximum Feedback Capacitance (Crss): 5 pF;

Details

2N7002

Plessey Semiconductors Discrete Components Div

Other Transistors;

Details

BAV99

Jiangsu Changjiang Electronics Technology

RECTIFIER DIODE; Surface Mount: YES; Maximum Forward Voltage (VF): .715 V; Maximum Operating Temperature: 150 Cel; Maximum Reverse Recovery Time: .006 us; Maximum Output Current: .2 A;

Details

SDR0604-101KL

Bourns

SDR0604-101KL by Bourns is a surface mount fixed inductor with a nominal inductance of 100 uH. It is a general purpose inductor suitable for power applications, with a max rated current of 0.52 A and a self-resonance frequency of 9 MHz.

Details

SS14

Vishay Semiconductors

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

BSS138BK,215

NXP Semiconductors

NXP Semiconductors' BSS138BK,215 is a N-CHANNEL FET with 0.36A max drain current and 0.42W power dissipation. Ideal for applications requiring single configuration and surface mount technology, such as enhancement mode operation in temperatures up to 150°C.

Details

BZX84-C5V1 Technical Details

TYPE	DESCRIPTION
Package Body Material:	PLASTIC/EPOXY
Maximum Time At Peak Reflow Temperature (s):	30
Working Test Current:	5 mA
Config:	SINGLE
Diode Type:	ZENER DIODE
Surface Mount:	YES
Terminal Finish:	TIN
No. of Terminals:	3
Terminal Position:	DUAL
Package Style (Meter):	SMALL OUTLINE
Technology:	ZENER
JESD-30 Code:	R-PDSO-G3
No. of Elements:	1
Package Shape:	RECTANGULAR
Terminal Form:	GULL WING
Polarity:	UNIDIRECTIONAL
Maximum Operating Temperature:	150 Cel
Moisture Sensitivity Level (MSL):	1
JEDEC-95 Code:	TO-236AB
JESD-609 Code:	e3
Minimum Operating Temperature:	-65 Cel
Maximum Voltage Tolerance:	5 %
Diode Element Material:	SILICON
Nominal Reference Voltage:	5.1 V
Maximum Power Dissipation:	.25 W
Reference Standard:	AEC-Q101; IEC-60134
Peak Reflow Temperature (C):	260

Category Top Products

TZM5226BGS08

Temic Semiconductors

TZM5226BGS08 by Temic Semiconductors is a Zener diode with a max reverse current of 25 uA and a max operating temperature of 175 °C. It is commonly used in applications requiring voltage regulation and protection against voltage spikes.

BZX84C3V3

Changzhou Galaxy Century Microelectronics

ZENER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;

SZMMSZ4688T1G

Onsemi

SZMMSZ4688T1G by Onsemi is a Zener diode with a nominal reference voltage of 4.7V and max voltage tolerance of 4.99%. It operates in temperatures ranging from -55 to 150 °C and has a max power dissipation of 0.5W. Ideal for applications requiring precise voltage regulation in automotive electronics due to AEC-Q101 compliance.

1N4741A

Lite-on Semiconductor

ZENER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;

BZX84C5V1

National Semiconductor

ZENER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;

BZV55C15

Synsemi

ZENER DIODE; Surface Mount: YES; Maximum Operating Temperature: 200 Cel; Maximum Power Dissipation: .5 W; Nominal Reference Voltage: 15 V; Maximum Voltage Tolerance: 5 %;

BZX84C3V3

Hitano Enterprise

ZENER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;

SZMM3Z18VT1GX

Nexperia

SZMM3Z18VT1GX by Nexperia is a Zener diode with 18V nominal reference voltage, suitable for applications requiring a max reverse test voltage of 13V. With a working test current of 5mA and max power dissipation of 0.3W, it operates in temperatures ranging from -55 to 150 °C. Ideal for surface mount designs due to its small outline package style.

BZX84C12

Sensitron Semiconductor

ZENER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;

SZ1SMB5924BT3G

Onsemi

SZ1SMB5924BT3G by Onsemi is a Zener diode with 9.1V nominal voltage, 41.2mA test current, and 4 ohm dynamic impedance. Ideal for applications requiring precise voltage regulation in automotive electronics due to AEC-Q101 compliance and -65 to 150 °C operating temperature range.

1N5337B

Taitron Components

ZENER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;

BZV55-C5V1

Philips Semiconductors

ZENER DIODE; Surface Mount: YES; Nominal Reference Voltage: 5.1 V; Peak Reflow Temperature (C): 260; Maximum Operating Temperature: 200 Cel; Maximum Power Dissipation: .5 W;

SZ1SMA5919BT3G

Onsemi

SZ1SMA5919BT3G by Onsemi is a Zener diode with a 5.6V nominal reference voltage and 2 ohm max dynamic impedance. It operates b/w -65 to 150 °C and has a max power dissipation of 0.5W, making it suitable for automotive applications requiring precise voltage regulation in compact spaces.

MMSZ5226BT1G

Onsemi

MMSZ5226BT1G by Onsemi is a Zener diode with 3.3V nominal reference voltage, 5% max voltage tolerance, and 28 ohm max dynamic impedance. It is used in applications requiring precise voltage regulation, such as power supplies and signal conditioning circuits.

LBZX84C3V3LT1G

Leshan Radio

LBZX84C3V3LT1G by Leshan Radio is a Zener Diode with 3.3V nominal reference voltage, 5mA working test current, and 6.1% max voltage tolerance. Ideal for applications requiring precise voltage regulation in compact electronic devices due to its surface mount configuration and low dynamic impedance of 95 ohm.

BZV55-C5V1

Changzhou Galaxy Century Microelectronics

ZENER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;

1N4741P/TR8

Microsemi

ZENER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;

BZV55C15

Philips Components

ZENER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;

1N4741CPE3/TR8

Microsemi

ZENER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;

SZMM5Z3V3T1G

Onsemi

SZMM5Z3V3T1G by Onsemi is a Zener diode with a 3.3V nominal reference voltage, ideal for voltage regulation in electronic circuits. It has a max power dissipation of 0.5W and operates b/w -65 to 150 °C, making it suitable for various temperature conditions. With a small outline package style and matte tin terminal finish, it is designed for surface mount applications requiring precise voltage control.