Image shown is a representation only. Exact specifications should be obtained from the product data sheet.

All prices are in USD

Bulk

QTY	Unit Price	Ext Price
4,401	$0.142	$627.142

MS25036-107

Manufacturer

Defense Logistics Agency
Manufacturer's Part Number

MS25036-107
Description

RING TERMINAL; Additional Features: NYLON; Wire Gauge: 14 AWG; Voltage (Rated): 300 V; Wire Cross Section: 2.08 mm2; No. of Ways: 1;
Datasheet

4401 In Stock

Popular Products

FT232RQ-REEL

FTDI

FTDI's FT232RQ-REEL is a USB bus controller with 32 terminals, operating at 3.3-5.25V. It supports data transfer rates up to 60MBps and clock frequency of 12.02MHz, suitable for RS232/RS422/RS485 interfaces in various applications like industrial automation and communication systems.

Details

B340A-13-F

SPC TECHNOLOGY/ MULTICOMP

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

2N7002

Nexperia

N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .83 W; No. of Elements: 1; Transistor Application: SWITCHING;

Details

EU2B-YS303C

Idec

ROTARY SWITCH;

Details

M39029/58-360

Amphenol

CONNECTOR ACCESSORY; MIL Conformity: YES; Associated Military - Specifications: MIL-DTL-38999; Contact Gender: MALE; Terminal Type: CRIMP; IEC Conformity: NO;

Details

M39029/58-360

Molex

CONNECTOR ACCESSORY; Alternate Contact Sources: MILITARY; Removal Tool Sources: MILITARY; Material: COPPER ALLOY; National Stock Number (NSN): 5999004733551; Mating Contacts: M39029/56-348, M39029/57-354;

Details

2N2222A

Secos

NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .6 A; JEDEC-95 Code: TO-92;

Details

LM358MX

Texas Instruments

LM358MX by Texas Instruments is a dual operational amplifier with a max input offset voltage of 9000 uV. It has a nominal voltage of 5V and a min voltage gain of 15000. This op amp is commonly used in applications requiring amplification and signal conditioning.

Details

LL4148

Secos

RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;

Details

LP2950CDT-3.3G

Onsemi

LP2950CDT-3.3G by Onsemi is a fixed positive single output LDO regulator with a nominal output voltage of 3.3V and max output current of 0.1A. It has a small outline package style, operates at temperatures ranging from -40 to 125 °C, and is suitable for applications requiring low dropout voltage and precise voltage regulation in electronic circuits.

Details

BSS138

Micro Commercial Components

N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Package Shape: RECTANGULAR; Terminal Position: DUAL;

Details

1N4148

Good-ark Electronics

RECTIFIER DIODE; Surface Mount: NO; No. of Elements: 1; Maximum Non Repetitive Peak Forward Current: .5 A; Maximum Forward Voltage (VF): 1 V; No. of Phases: 1;

Details

NC7WZ17P6X

Onsemi

The Onsemi NC7WZ17P6X is a logic gate with 2 functions, featuring a propagation delay of 13.1 ns at 1.8V supply voltage. Ideal for industrial applications, it operates b/w -40 to 85°C and has a max power supply current of 100mA. With Schmitt Trigger technology and small outline packaging, it suits compact electronic designs requiring fast signal processing.

Details

1N4148

Nte Electronics

RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;

Details

2N7002

STMicroelectronics

N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Maximum Drain Current (ID): .2 A; Transistor Application: SWITCHING;

Details

AT90CAN128-16AU

Atmel

MICROCONTROLLER, RISC; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 64; Package Code: TQFP; Package Shape: SQUARE;

Details

BAV99

Frontier Electronics

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

LM107H

Linear Technology

LM107H by Linear Technology is an Operational Amplifier with a max input offset voltage of 3000uV, common mode reject ratio of 96dB, and min voltage gain of 50000. It is used in military applications due to its MILITARY temperature grade and BIPOLAR technology for precise signal processing in harsh environments.

Details

LL4148-GS08

Vishay Intertechnology

The Vishay Intertechnology LL4148-GS08 is a glass diode with fast recovery time of 0.008 us and max reverse current of 5 uA. Ideal for applications requiring rectification, it has a breakdown voltage of 100 V and can handle a peak forward current of 2 A.

Details

SS14

Micro Commercial Components

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

MS25036-107 Technical Details

TYPE	DESCRIPTION
Total Ways:	1
Wire Cross Section:	2.08 mm²
Product Type:	Ring Terminal
Safety Compliance:	UL
Additional Features:	Nylon
Wire Gauge:	14 AWG
Rated Voltage:	300 V

Category Top Products

39-00-0182

Molex

PUSH-ON TERMINAL; Wire Gauge: 18 AWG; Terminal Gender: FEMALE;

1733651

Phoenix Contact

Phoenix Contact 1733651 is a BARRIER STRIP TERMINAL BLOCK with 10 ways, rated for 17.5A current and 400V voltage. It uses SCREW fastening method and supports wire gauge up to 14 AWG. Ideal for BOARD mounting, it has safety approvals from CB, CCA, CSA, CUL, GOST, and UL.

1-796634-2

Tyco Electronics Amp

STRIP TERMINAL BLOCK; Mounting Type: CABLE; Fastening Method: SCREW; Additional Features: STANDARDS: IEC 998-1/998-2-1, PA 6-6, 94V-0, POLARIZED; Wire Gauge: 12 AWG; Voltage (Rated): 300 V;

327583

Tyco Electronics Amp

BUTT TERMINAL; Wire Gauge: 14 AWG; Terminal Gender: FEMALE; Wire Cross Section: 2.62 mm2;

1777280

Phoenix Contact

The Phoenix Contact 1777280 is a Barrier Strip Terminal Block with 2.5mm2 wire cross section and rated for 320V voltage and 12A current. It features screw fastening method, suitable for connecting 12 AWG wires in applications requiring CB, CSA, CUL, EAC, UL, VDE safety approvals.

3967

Vogt Ag Verbindungstechnik

PUSH-ON TERMINAL; Wire Gauge: 10 AWG; Wire Cross Section: 6 mm2; Terminal Gender: FEMALE;

4-520447-2

TE Connectivity

TE Connectivity's 4-520447-2 is a UL-approved PUSH-ON TERMINAL for 10 AWG wire at 600V. With a wire cross section of 5.26 mm2, this FEMALE terminal block is ideal for various electrical applications.

MS25036-105

TE Connectivity

RING TERMINAL; Additional Features: NYLON; Wire Gauge: 18 AWG; Voltage (Rated): 600 V; Safety Approval: CSA; UL; Wire Cross Section: 1.5 mm2;

1729018

Phoenix Contact

Phoenix Contact 1729018 is a modular terminal block with 2 ways, rated for 13.5A current and 250V voltage. It uses screw fastening method and supports wire gauge up to 16 AWG (1.5 mm²). Ideal for board mounting applications, it holds CSA and UL safety approvals.

1231360000

Weidmueller & Kg

BARRIER STRIP TERMINAL BLOCK;

51864-1

TE Connectivity

TE Connectivity's 51864-1 is a UL-approved FEMALE RING TERMINAL for 14 AWG wire with a rated voltage of 300V. Its wire cross section is 2.08 mm2, making it ideal for various electrical applications requiring secure connections and reliable performance.

2-33466-1

TE Connectivity

RING TERMINAL; Wire Gauge: 6 AWG; Wire Cross Section: 15 mm2; Safety Approval: UL; No. of Ways: 1;

1843606

Phoenix Contact

The Phoenix Contact 1843606 is a UL-approved BARRIER STRIP TERMINAL BLOCK with 160V rated voltage and 8A current. It features a BOARD mounting type and CONNECTOR fastening method, suitable for applications requiring secure electrical connections in limited space environments.

MKDS1/2-3,81

Phoenix Contact

The Phoenix Contact MKDS1/2-3,81 is a barrier strip terminal block with 2 ways and rated for 13.5A current at 200V voltage. It uses a screw fastening method and supports wire gauge up to 16 AWG, making it ideal for board mounting applications in various industries. Safety approvals include CB, CUL, EAC, SEV, and UL.

3522

Keystone Electronics

PCB TERMINAL; Terminal Gender: FEMALE;

3044157

Phoenix Contact

Phoenix Contact 3044157 is a DIN RAIL mounted MODULAR TERMINAL BLOCK with 2 rows and ways. It supports wire gauge up to 8 AWG and wire cross section of 10 mm2. Safety approved by CSA, UL, VDE, it's ideal for industrial control applications.

1546670-3

Tyco Electronics Elcon

BARRIER STRIP TERMINAL BLOCK; Mounting Type: CABLE AND PANEL; Fastening Method: SCREW; Additional Features: STANDARD: UL94V-0, THERMOPLASTIC; Wire Gauge: 14 AWG; Voltage (Rated): 300 V;

1SNK506410R0000

Abb

MODULAR TERMINAL BLOCK; Mounting Type: DIN RAIL; Wire Gauge: 10 AWG; Voltage (Rated): 150 V; No. of Decks: 1; Wire Cross Section: 4 mm2;

D-436-37CS2881

TE Connectivity

WIRE TERMINAL; Wire Gauge: 16 AWG; Wire Cross Section: 1.21 mm2; Safety Approval: UL;

1952283

Phoenix Contact

The Phoenix Contact 1952283 is a BARRIER STRIP TERMINAL BLOCK with 4 ways, rated for 8A current and 160V voltage. It has safety approvals from CB, CUL, EAC, UL, VDE. Ideal for connecting wires of 1.5mm2 cross section using push-in fastening method in various applications requiring reliable electrical connections.