Image shown is a representation only. Exact specifications should be obtained from the product data sheet.

325300

Manufacturer

TE Connectivity
Manufacturer's Part Number

325300
Description

WIRE TERMINAL; Wire Gauge: 0 AWG; Wire Cross Section: 60 mm2; Safety Approval: UL; Terminal Gender: FEMALE;
Datasheet

Datasheet

Not In Stock

Popular Products

NE555DR

Texas Instruments

NE555DR by Texas Instruments is an Analog Waveform Generation IC with 8 terminals, operating voltage of 5V, and power supplies ranging from 5-15V. It is a versatile component for pulse generation applications due to its small outline package and commercial temperature grade suitability.

Details

1N4148

Shenzhen Yixinsemi Electronics

RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;

Details

2N7002

Vishay Intertechnology

2N7002 by Vishay Intertechnology is a N-CHANNEL FET with 60V DS Breakdown Voltage, 0.115A Drain Current, and 7.5 ohm On Resistance. Ideal for SWITCHING applications due to its SINGLE configuration with BUILT-IN DIODE. Operates in ENHANCEMENT MODE, suitable for surface mount with GULL WING terminals.

Details

SN65HVD234DR

Texas Instruments

SN65HVD234DR by Texas Instruments is an 8-terminal interface circuit with a data rate of 1 Mbps. Operating temperature ranges from -40 to 125 °C, making it ideal for automotive applications. With a supply voltage of 3.3 V and low current draw of 6 mA, it's suitable for network interfaces in compact designs.

Details

LL4148

Daco Semiconductor

RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;

Details

LM7805CT

Integrated Circuit Technology

Other Regulators; No. of Terminals: 3; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 5 %; Terminal Position: SINGLE; Operating Temperature (TJ-Min): 0 Cel;

Details

CR0805-FX-10R0ELF

Bourns

Bourns CR0805-FX-10R0ELF is a SMT fixed resistor with 10 ohm resistance, 1% tolerance, and 0.125 W power dissipation. Ideal for applications requiring a temperature range of -55 to 155 °C, such as automotive electronics and industrial control systems.

Details

SMBJ18CA

Secos

TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

MBRS3200T3G

Onsemi

MBRS3200T3G by Onsemi is a Schottky rectifier diode with a max output current of 3A and a max forward voltage of 0.59V. It operates in temperatures ranging from -65°C to 175°C, making it suitable for power applications. The diode has a peak repetitive reverse voltage of 200V and is designed for surface mount installation in electronic circuits.

Details

1N4148

National Semiconductor

RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;

Details

LL4148

Formosa Microsemi

RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;

Details

LM555CM

Onsemi

PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;

Details

MC33269T-3.3G

Onsemi

MC33269T-3.3G by Onsemi is a fixed positive single output LDO regulator with a max output current of 0.8 A and a dropout voltage of 1.35 V. It is commonly used in applications that require stable voltage regulation, such as power supplies for electronic devices.

Details

BAV99

Microsemi

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

1N4148

Texas Instruments

1N4148 by Texas Instruments is a rectifier diode with max reverse recovery time of 0.004 us and max forward voltage of 1V. Ideal for applications requiring low reverse current such as signal demodulation circuits. Operates at max temp of 200°C, making it suitable for high-temperature environments.

Details

2N7002

Micro Commercial Components

Small Signal Field-Effect Transistors; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Transistor Application: SWITCHING; Maximum Drain Current (ID): .34 A; Package Style (Meter): SMALL OUTLINE;

Details

SMBJ18CA

Changzhou Galaxy Century Microelectronics

TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: J BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

CSNF651

Honeywell Sensing And Control

CSNF651 by Honeywell Sensing And Control is an industrial-grade analog circuit with 3 terminals. It operates b/w -40 to 85°C, supporting supply voltages from -15V to 15V. Ideal for applications requiring a special shape rectangular package style and through-hole terminal form.

Details

M39029/58-360

Molex

CONNECTOR ACCESSORY; Alternate Contact Sources: MILITARY; Removal Tool Sources: MILITARY; Material: COPPER ALLOY; National Stock Number (NSN): 5999004733551; Mating Contacts: M39029/56-348, M39029/57-354;

Details

43025-0400

Molex

The Molex 43025-0400 is a board connector with 4 contacts, 2 rows, and a mating contact pitch of 0.118". It has a body length of 0.27", insulation resistance of 1Gohm, and operates b/w -40 to 105°C. Ideal for commercial applications requiring a female connector with crimp termination and UL94V-0 flammability rating.

Details

325300 Technical Details

TYPE	DESCRIPTION
Wire Cross Section:	60 mm²
Terminal Gender:	Female
Product Type:	Wire Terminal
Safety Compliance:	UL
Wire Gauge:	0 AWG

Category Top Products

1725698

Phoenix Contact

Phoenix Contact 1725698 is a BARRIER STRIP TERMINAL BLOCK with 6 ways, rated for 6A current and 160V voltage. It has safety approvals from CSA, CUL, EAC, and UL. Ideal for BOARD mounting applications with wire gauge up to 20 AWG and wire cross section of 0.5 mm2.

2-31894-2

TE Connectivity

TE Connectivity 2-31894-2 is a UL-approved FEMALE RING TERMINAL for 22 AWG wire with a rated voltage of 300V. Ideal for applications requiring terminals & terminal blocks, accommodating wire cross sections up to 1.42 mm².

1-320551-2

TE Connectivity

TE Connectivity's 1-320551-2 is a UL-approved RING TERMINAL for 22 AWG wire, rated at 300V. With 0.38 mm2 wire cross section, it is ideal for FEMALE terminals in various applications.

1SNK705062R0000

TE Connectivity

TE Connectivity's 1SNK705062R0000 is a DIN RAIL mounted MODULAR TERMINAL BLOCK with UL safety approval. It supports wire gauge up to 12 AWG and rated voltage of 600V, suitable for applications requiring 20A current with wire cross section of 2.5 mm2.

31020106

Metz Connect Usa

STRIP TERMINAL BLOCK;

9-160583-2

Tyco Electronics Amp

PUSH-ON TERMINAL; Additional Features: NYLON; Wire Gauge: 16 AWG; Voltage (Rated): 300 V; Wire Cross Section: 1.5 mm2; Terminal Gender: FEMALE;

1790522

Phoenix Contact

BARRIER STRIP TERMINAL BLOCK; Manufacturer Series: 1790522;

231-332/001-000

Wago

Wago 231-332/001-000 is a BOARD-mounted STRIP TERMINAL BLOCK with 600V rated voltage and 10A current. It has ABS, CB, CSA safety approvals and is suitable for various applications requiring reliable connector fastening in industrial settings.

1-963748-1

TE Connectivity

TAB TERMINAL; Terminal Gender: MALE; Wire Cross Section: 1 mm2;

MS25036-108

Amphenol Communications Solutions

RING TERMINAL; Additional Features: MATERIAL: POLYAMIDE; Wire Gauge: 14 AWG; Voltage (Rated): 600 V; Safety Approval: CSA; MIL; UL; Wire Cross Section: 2.08 mm2;

3-520106-2

TE Connectivity

TE Connectivity 3-520106-2 TAB TERMINAL is a UL approved male terminal block for 14 AWG wire with 600V rating. Ideal for applications requiring secure connections with 2.08 mm² wire cross section.

MKDS1,5/3-5,08

Phoenix Contact

Phoenix Contact MKDS1,5/3-5,08 is a BARRIER STRIP TERMINAL BLOCK with 1.5mm2 wire cross section and 400V rated voltage. It supports up to 17.5A current, suitable for BOARD mounting in various applications requiring CCA, CSA, CUL, GOST, SEV, and UL safety approvals.

322235

TE Connectivity

RING TERMINAL; Wire Gauge: 14 AWG; Wire Cross Section: 2 mm2; Safety Approval: UL; No. of Ways: 1;

1777280

Phoenix Contact

The Phoenix Contact 1777280 is a Barrier Strip Terminal Block with 2.5mm2 wire cross section and rated for 320V voltage and 12A current. It features screw fastening method, suitable for connecting 12 AWG wires in applications requiring CB, CSA, CUL, EAC, UL, VDE safety approvals.

1715747

Phoenix Contact

The Phoenix Contact 1715747 is a modular terminal block with a mounting type of BOARD. It has a rated voltage of 250V and can handle currents up to 22A. With its safety approvals from CSA and UL, it is suitable for various applications requiring secure connections and wire cross sections of up to 2.5mm2.

1285

Keystone Electronics

TAB TERMINAL; Terminal Gender: MALE;

734-132

Wago

Wago 734-132 is a 2-way strip terminal block with rated voltage of 300V and current of 10A. It is approved by ABS, CCA, CSA, DNVGL, EN, IEC for safety. Ideal for board mounting applications using connector fastening method.

3003

Ntt

LUG TERMINAL; Additional Features: MATERIAL: STEEL; FINISH: TIN;

1733457

Phoenix Contact

Phoenix Contact 1733457 is a UL-approved barrier strip terminal block for BOARD mounting. It supports wire gauge up to 14 AWG with rated voltage of 250V and current of 17.5A. Ideal for applications requiring secure connections in industrial control systems.

1945096

Phoenix Contact

The Phoenix Contact 1945096 is a STRIP TERMINAL BLOCK with 2 ways, rated for 250V and 8A. It is mounted on BOARD using CONNECTOR fastening method. This terminal block has safety approvals from CUL, EAC, and UL, making it ideal for various industrial applications requiring secure electrical connections.