Image shown is a representation only. Exact specifications should be obtained from the product data sheet.

MKDS1,5/3-5,08

Manufacturer

Phoenix Contact
Manufacturer's Part Number

MKDS1,5/3-5,08
Description

BARRIER STRIP TERMINAL BLOCK; Mounting Type: BOARD; Fastening Method: SCREW; Additional Features: PA, 94V-0; Wire Gauge: 14 AWG; Voltage (Rated): 400 V;
Datasheet

Datasheet

Not In Stock

Popular Products

2N2222A

Texas Instruments

2N2222A by Texas Instruments is a small signal NPN bipolar junction transistor (BJT) with a max collector-emitter voltage of 40V and a max collector current of 0.8A. It is commonly used for switching applications due to its fast turn on/off times (35ns/285ns) and high transition frequency (300MHz).

Details

LFXTAL025159REEL

Iqd Frequency Products

LFXTAL025159REEL by IQD Frequency Products is a 32.768 kHz crystal oscillator with 20 ppm frequency tolerance and 40,000 ohm series resistance. It is ideal for applications requiring precise timekeeping, such as real-time clocks in IoT devices or microcontrollers in wearables. The surface-mount design with a drive level of 1 uW makes it suitable for compact electronic systems.

Details

MMBT3904-7-F

Diodes Incorporated

Diodes Inc. MMBT3904-7-F is a NPN BJT transistor for switching applications. Features include VCEsat of 0.3V, hFE of 30, and IC of 0.2A. With a max operating temp of 150°C, it's ideal for small outline SMT designs in automotive electronics.

Details

1N4148

American Power Devices

RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;

Details

BAV99

Transys Electronics

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

1N4148

Leshan Radio

RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;

Details

INA826AIDGKR

Texas Instruments

INA826AIDGKR by Texas Instruments is an instrumentation amplifier with 150uV max input offset voltage, 0.095uA max average bias current, and 1MHz nominal bandwidth. Ideal for automotive applications due to its -40 to 125 °C operating temperature range and high common mode rejection ratio of 120dB.

Details

U.FL-R-SMT-1(10)

Hirose Electric

U.FL-R-SMT-1(10) by Hirose Electric is a RF connector with 50 ohm impedance, 0.05 dB insertion loss, and 8 GHz operating frequency. Ideal for board mounting in commercial applications, it features gold termination finish, liquid crystal polymer insulator, and 200VAC dielectric voltage resistance.

Details

BAV99

Vishay Telefunken

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

BSS138

Inter F E T

N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Terminal Finish: TIN LEAD; Package Body Material: PLASTIC/EPOXY;

Details

ATMEGA328P-AU

Microchip Technology

ATMEGA328P-AU by Microchip: 8-bit RISC CPU, 20 MHz clock, 23 I/O lines. Ideal for industrial applications with SPI, TWI, USART connectivity and low power mode. Features include 2048 RAM bytes, 1024 EEPROM size, and 16384 ROM words.

Details

1N4148W-7-F

Diodes Incorporated

1N4148W-7-F by Diodes Inc. is a single rectifier diode with 0.715V max forward voltage and 100V max reverse voltage. Ideal for applications requiring fast switching speeds, it has a small outline package style and matte tin terminal finish, making it suitable for surface mount PCB designs.

Details

BAV99

Comchip Technology

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

C0603X104K5RACAUTO

KEMET Corporation

C0603X104K5RACAUTO by KEMET Corp is a ceramic capacitor with capacitance of 0.1 uF and rated DC voltage of 50 V. It has a temperature coefficient of 15% and can operate b/w -55 to 125 °C. This SMT package is commonly used in automotive applications due to its AEC-Q200 reference standard.

Details

SMBJ18CA

Taiwan Semiconductor

TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

MBR0520L-T1

Won-top Electronics

MBR0520L-T1 by Won-top Electronics is a Schottky rectifier diode with 20V peak reverse voltage and 0.5A output current. It is a single-config, surface-mount diode in a small outline package, suitable for applications requiring high-speed switching and low forward voltage drop. Operating temperature range from -65°C to 125°C makes it ideal for various electronic circuits.

Details

2N2222A

Baneasa S A

NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Collector Current (IC): .8 A; Qualification: Not Qualified;

Details

LL4148

Hy Electronic

RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;

Details

STM32F103C8T6

STMicroelectronics

STM32F103C8T6 by STMicroelectronics is a 32-bit microcontroller with 48 terminals, operating at up to 16 MHz. It features 10-Ch 12-Bit ADC channels and 7 DMA channels, suitable for industrial applications requiring low power consumption and high-speed connectivity via CAN, I2C(2), SPI(2), USART(3), USB.

Details

LM317T

STMicroelectronics

ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: TO-220; Terminal Form: THROUGH-HOLE; JESD-30 Code: R-XSFM-T3; Minimum Input-Output Voltage Differential: 3 V;

Details

MKDS1,5/3-5,08 Technical Details

TYPE	DESCRIPTION
Mounting Style:	Board
Total Ways:	3
Wire Cross Section:	1.5 mm²
Product Type:	Barrier Strip Terminal Block
Safety Compliance:	CCA; CSA; CUL; GOST; SEV; UL
Additional Features:	PA, 94V-0
Total Rows:	1
Fastening Style:	Screw
Rated Current:	17.5 A
Wire Gauge:	14 AWG
Total Decks:	1
Rated Voltage:	400 V

Category Top Products

1809089

Phoenix Contact

STRIP TERMINAL BLOCK;

1-796634-2

TE Connectivity

TE Connectivity 1-796634-2 is a UL-approved strip terminal block with 12 ways, rated for 15A current and 300V voltage. It accommodates 12 AWG wire gauge with a cross-section of 3mm², mounted via screws on cables. Ideal for various applications requiring secure electrical connections.

09150006103

Harting Electronics & Kg

WIRE TERMINAL; Wire Gauge: 20 AWG; Wire Cross Section: .5 mm2;

D-436-37-COLD

TE Connectivity

BUTT TERMINAL; Mounting Type: CABLE; Wire Gauge: 16 AWG; Safety Approval: UL; Wire Cross Section: 7.54 mm2;

19001-0007

Molex

Molex 19001-0007 is a UL-approved TAB TERMINAL for 18 AWG wire, rated at 300V. With 0.8 mm2 wire cross section, it's ideal for male terminal applications in various industries.

D-436-36CS2881

TE Connectivity

WIRE TERMINAL; Wire Gauge: 20 AWG; Safety Approval: UL; Wire Cross Section: .61 mm2;

MS-25036-105

Molex

RING TERMINAL; Additional Features: NYLON; Wire Gauge: 18 AWG; Voltage (Rated): 600 V; Wire Cross Section: 1.5 mm2; Safety Approval: CSA; UL;

1SNK705062R0000

Abb

MODULAR TERMINAL BLOCK; Mounting Type: DIN RAIL; Wire Gauge: 12 AWG; Voltage (Rated): 600 V; Safety Approval: UL; Wire Cross Section: 2.5 mm2;

22-8

J S T Mfg

RING TERMINAL; Wire Gauge: 4 AWG; Wire Cross Section: 26.66 mm2;

1SNK505060R0000

TE Connectivity

TE Connectivity's 1SNK505060R0000 is a DIN RAIL mounted MODULAR TERMINAL BLOCK with UL safety approval. It supports wire gauge up to 12 AWG and rated voltage of 600 V, suitable for applications requiring 20 A current and wire cross section of 4 mm2.

MS25036-103

Amphenol Communications Solutions

RING TERMINAL; Additional Features: NYLON; Wire Gauge: 18 AWG; Voltage (Rated): 600 V; Safety Approval: CSA; UL; Wire Cross Section: 1.5 mm2;

MS-25036-101

Molex

RING TERMINAL; Wire Gauge: 16 AWG; Voltage (Rated): 300 V; No. of Ways: 1; Safety Approval: UL; Wire Cross Section: 1.42 mm2;

285-407

Wago

The Wago 285-407 is a DIN RAIL mounted MODULAR TERMINAL BLOCK with 6 AWG wire gauge, rated for 1000V. Featuring a wire cross section of 95 mm2, it offers fastening via CONNECTOR and supports up to 4 ways. Ideal for industrial applications requiring secure electrical connections in high voltage environments.

350080-1

TE Connectivity

RING TERMINAL; Wire Gauge: 14 AWG; Wire Cross Section: 2 mm2; Safety Approval: UL; No. of Ways: 1; Terminal Gender: FEMALE;

MSTBA2.5/2-G-5.08

Phoenix Contact

Phoenix Contact's MSTBA2.5/2-G-5.08 is a 250V rated strip terminal block with 12A current rating, ideal for board mounting applications. It holds safety approvals from CB, CSA, CUL, GOST, UL, and VDE making it a reliable choice for various electronic projects requiring a 2-way connector setup.

281-915/281-410

Wago

MODULAR TERMINAL BLOCK;

MSTBVA2,5/4-G-5,08

Phoenix Contact

Phoenix Contact's MSTBVA2,5/4-G-5,08 is a 4-way strip terminal block with a rated voltage of 320V and current of 12A. It is approved by CB, CSA, CUL, EAC, EN, UL, VDE for safety. Ideal for board mounting applications using connector fastening method.

1711738

Phoenix Contact

Phoenix Contact 1711738 is a BARRIER STRIP TERMINAL BLOCK with 3 ways, rated for 24A current and 400V voltage. It accepts wire gauge up to 12 AWG and wire cross section of 2.5 mm2, mounted on board using screws. Ideal for industrial applications requiring secure electrical connections.

3044092

Phoenix Contact

Phoenix Contact 3044092 is a DIN RAIL mounted MODULAR TERMINAL BLOCK with 2 ways. It supports wire gauge up to 12 AWG and wire cross section of 4 mm². Safety approved by CB, CSA, CUL, GOST, UL, VDE for various industrial applications.

4-520447-2

TE Connectivity

TE Connectivity's 4-520447-2 is a UL-approved PUSH-ON TERMINAL for 10 AWG wire at 600V. With a wire cross section of 5.26 mm2, this FEMALE terminal block is ideal for various electrical applications.