Image shown is a representation only. Exact specifications should be obtained from the product data sheet.

SMP-MSLD-PCT-6

Manufacturer

Amphenol
Manufacturer's Part Number

SMP-MSLD-PCT-6
Description

RF SMP CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; Voltage Standing Wave Ratio: 1.25; No. of Ports: 1;
Datasheet

Datasheet

Not In Stock

Popular Products

LL4148

Vishay Telefunken

RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;

Details

LM2675M-ADJ/NOPB

National Semiconductor

SWITCHING REGULATOR; Temperature Grade: AUTOMOTIVE; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;

Details

SMBJ18CA

Vishay Semiconductors

TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: J BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

LM7805CT

Comset Semiconductors

Other Regulators; No. of Terminals: 3; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 5 %; Operating Temperature (TJ-Min): 0 Cel; Technology: BIPOLAR;

Details

1N4148

Taiwan Semiconductor

RECTIFIER DIODE; Surface Mount: NO; Peak Reflow Temperature (C): 260; Maximum Operating Temperature: 175 Cel; JESD-609 Code: e3; No. of Elements: 1;

Details

2N2222A

Telcom Semiconductor

NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;

Details

BSS84-7-F

Diodes Incorporated

Diodes Inc. BSS84-7-F is a P-channel FET with 50V DS breakdown voltage, 0.13A max drain current, and 10 ohm RDS(on). Ideal for switching applications, it features a single configuration with built-in diode in a small outline package. Operating in enhancement mode at up to 150°C, it has Gull Wing terminals and matte tin finish.

Details

BSS138

Onsemi

N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Package Shape: RECTANGULAR; Terminal Finish: Matte Tin (Sn) - annealed;

Details

LM78L05ACMX/NOPB

National Semiconductor

FIXED POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 8; Package Code: SOP; Terminal Form: GULL WING; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 5 %;

Details

DS18B20U+

Maxim Integrated

TEMPERATURE SENSOR,SWITCH/DIGITAL OUTPUT,SERIAL; Mounting Feature: SURFACE MOUNT; No. of Terminals: 8; Package Shape or Style: SQUARE; Housing: PLASTIC; Minimum Supply Voltage: 3 V;

Details

DS18B20+

Maxim Integrated

TEMPERATURE SENSOR,SWITCH/DIGITAL OUTPUT,SERIAL; Mounting Feature: THROUGH HOLE MOUNT; No. of Terminals: 3; Package Shape or Style: RECTANGULAR; Maximum Operating Current: 1.5 mA; Package Equivalence Code: SIP3,.1,50;

Details

LL4148

Changzhou Starsea Electronics

RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;

Details

STM8S003F3P6TR

STMicroelectronics

STM8S003F3P6TR by STMicroelectronics is an 8-bit microcontroller with a max clock frequency of 16 MHz. It features 1024 RAM bytes, 128 data EEPROM size, and 5-ch 10-bit ADC channels. Ideal for industrial applications requiring low power mode and connectivity via I2C, SPI, and UART interfaces.

Details

1N4148

Multicomp Pro

RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;

Details

BAV99+

Multicomp Pro

BAV99+ by Multicomp Pro is a series connected diode with 0.2A output current and 75V peak reverse voltage. Its 0.006us reverse recovery time makes it ideal for high-speed applications. This small outline rectifier diode is designed for surface mount installation in electronic circuits.

Details

1N4148

Terry Semiconductor

RECTIFIER DIODE; Surface Mount: NO; Maximum Reverse Recovery Time: .004 us; Config: SINGLE; JESD-609 Code: e0; Maximum Repetitive Peak Reverse Voltage: 100 V;

Details

M39029/58360

Esterline Technologies

CONNECTOR ACCESSORY; Terminal Type: CRIMP; Removal Tools: M81969/14-01; Associated Military - Specifications: MIL-DTL-38999; IEC Conformity: NO; MIL-Connector Accessory Name: CONTACT;

Details

EPCS4SI8N

Altera

CONFIGURATION MEMORY; Temperature Grade: INDUSTRIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Parallel or Serial: SERIAL;

Details

BSS138

Taitron Components

N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain-Source On Resistance: 3.5 ohm; Maximum Drain Current (ID): .2 A; Peak Reflow Temperature (C): NOT SPECIFIED;

Details

2N2222A

Microchip Technology

NPN; Configuration: SINGLE; Surface Mount: NO; Maximum Collector Current (IC): .8 A; Minimum Operating Temperature: -65 Cel; Terminal Position: BOTTOM;

Details

SMP-MSLD-PCT-6 Technical Details

TYPE	DESCRIPTION
Mating Contact Finish:	NOT SPECIFIED
Voltage Standing Wave Ratio:	1.25
Panel Mount:	NO
Sub-Category:	Other RF Connectors
Termination Type:	SOLDER
Maximum Operating Temperature (Cel):	165
Contact Gender:	MALE
Body Diameter:	.164 inch
Connector Type:	RF SMP CONNECTOR
Contact Material:	NOT SPECIFIED
Mounting Option-1:	LOCKING
Mounting Style:	RIGHT ANGLE
Other Names:	ARF2279 SMPMSLDPCT6 SMP-MSLD-PCT-6-ND 3937-SMP-MSLD-PCT-6
No. of Ports:	1
Contact Style:	COAX
Durability:	500 Cycles
Mounting Type:	BOARD
JESD-609 Code:	e4
Body Depth:	.32 inch
Minimum Operating Temperature:	-65 Cel
Total No. of Contacts:	1
Body Width:	1.73 inch
Coupling Type:	SNAP
Terminal Length:	.142 inch
Termination Contact Finish:	GOLD
Characteristic Impedance:	50 ohm
Insulator Material:	POLYTETRAFLUOROETHYLENE
Option:	GENERAL PURPOSE
Maximum Operating Frequency:	12 GHz
Shell Material:	STAINLESS STEEL
Body or Shell Style:	JACK
Reliability:	COMMERCIAL

Category Top Products

U.FL-R-SMT-1

Hirose Electric

U.FL-R-SMT-1 by Hirose Electric is a 50 ohm RF connector with 0.05 dB insertion loss and 200VAC dielectric voltage. Ideal for board mounting in commercial applications, it offers a max frequency of 6 GHz and features a right-angle mounting style.

PRF24-J-C-EP-085-SS

Samtec

Samtec's PRF24-J-C-EP-085-SS RF Connector features a 0.33" body diameter and 0.985" depth, with threaded coupling. Ideal for cable mounting, it has solder clamp termination and female contact gender, suitable for various RF applications.

MM8030-2610RJ3

Murata Manufacturing

MM8030-2610RJ3 by Murata Manufacturing is a RF connector with a low insertion loss of 0.5 dB and a voltage standing wave ratio of 1.5. It is designed for surface mount termination on boards and can operate at frequencies up to 11 GHz.

AFI-J-P-HF-ST-MT1

Samtec

Samtec AFI-J-P-HF-ST-MT1 RF connector features 50 ohm impedance, SNAP coupling, and 6 GHz operating frequency. Ideal for board mounting applications requiring a female jack connector with POLYTETRAFLUOROETHYLENE insulator material.

908-NM43200

Amphenol

Amphenol's 908-NM43200 RF connector features a dielectric voltage of 700VAC, gold contact finish, and a max operating frequency of 6 GHz. Ideal for commercial applications requiring a durable, 50 ohm coaxial plug with right-angle mounting and crimp termination on RD-178 cable types.

6802

Ddk

RF CONNECTOR; Body or Shell Style: PLUG; MIL Conformity: NO; IEC Conformity: NO; DIN Conformance: NO; Manufacturer Series: NC;

BJ79TL-7

Cinch Connectivity Solutions

BJ79TL-7 by Cinch Connectivity Solutions is an RF TRB connector with a body diameter of 0.687" and body depth of 0.8". It features a nickel shell finish, brass shell material, and crimp termination type. Ideal for commercial applications at a max operating frequency of 0.5 GHz.

302102

Amphenol

RF SMP CONNECTOR; Manufacturer Series: 302102;

SF9411-6000

Sv Microwave

OTHER RF CONNECTOR;

920-265J-51P

Amphenol

RF CONNECTOR; Manufacturer Series: 920-265J-51P;

MM5829-2700RJ4

Murata Manufacturing

Murata Manufacturing's MM5829-2700RJ4 RF CONNECTOR features SNAP coupling, 1.3 VSWR, and 50 ohm impedance. Ideal for BOARD mounting in applications up to 12 GHz frequency range.

131-0140-0001

TE Connectivity

TE Connectivity's 131-0140-0001 RF Connector features gold termination, threaded coupling, and PTFE insulator. With 50 ohm impedance and 2 GHz frequency, it is ideal for commercial applications requiring reliable signal transmission via cable or panel mounting.

131-8001

Amphenol

Amphenol 131-8001 RF Connector features 0.06 dB insertion loss, 1.49 VSWR, and 50 ohm impedance. Ideal for high-frequency applications up to 50 GHz with SNAP coupling and PTFE insulator in cable installations.

R222680000

Radiall S A

R222680000 by Radiall S A is an RF SMP CONNECTOR with 50 ohm impedance, 0.42 dB insertion loss, and 12 GHz max frequency. It features a gold (Au) - nickel (Ni) finish, SNAP coupling, and operates b/w -65 to 165 °C. Ideal for board mounting in applications requiring high-frequency signal transmission.

HK-LR-SR2

Hirose Electric

RF CONNECTOR; JESD-609 Code: e4; Contact Material: NOT SPECIFIED; Mating Contact Finish: NOT SPECIFIED; Termination Contact Finish: GOLD;

MM8030-2610RK0

Murata Manufacturing

MM8030-2610RK0 by Murata Manufacturing is a RF CONNECTOR with 0.5 dB Insertion Loss, 1.5 VSWR, and 11 GHz Max Operating Frequency. It is ideal for BOARD mounting in applications requiring a 50 ohm Characteristic Impedance and FEMALE contact gender with SNAP coupling type.

MS-147-C(LP)-1

Hirose Electric

MS-147-C(LP)-1 by Hirose Electric is a RF connector with 0.4 dB insertion loss, 50 ohm impedance, and 6 GHz operating frequency. It is used in commercial applications requiring durable connectors with snap coupling, gold finish, and male contact gender for cable mounting.

2390

Pomona Electronics

RF CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE-FEMALE; Panel Mount: NO; Mating Contact Finish: GOLD; MIL Conformity: NO;

119S101-40ML5

Rosenberger Hochfrequenztechnik & Kg

119S101-40ML5 RF connector by Rosenberger features 0.09 dB insertion loss, gold termination contact finish, and SNAP coupling type. With a max operating frequency of 10 GHz, it is ideal for applications requiring a 50 ohm characteristic impedance in high-frequency environments. Suitable for use in boards with surface mount termination.

SMP-MSLD-PCS-T

Amphenol

The Amphenol SMP-MSLD-PCS-T RF connector features a dielectric voltage of 470VAC, operating temperature range of -65 to 165°C, and impedance of 50 ohm. Ideal for commercial applications, this connector is designed for surface mount termination on boards with a max frequency of 18 GHz.