Image shown is a representation only. Exact specifications should be obtained from the product data sheet.

A1454KLETR-2F-T

Manufacturer

Allegro MicroSystems
Manufacturer's Part Number

A1454KLETR-2F-T
Description

MAGNETIC FIELD SENSOR,HALL EFFECT; Mounting Feature: SURFACE MOUNT; Output Type: DIGITAL VOLTAGE; Package Shape or Style: RECTANGULAR; Body Width: 3 inch; Output Interface Type: I2C INTERFACE;
Datasheet

Datasheet

Not In Stock

Popular Products

LL4148

Sensitron Semiconductor

RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;

Details

CRG0805F10R

Tyco Electronics Components

FIXED RESISTOR; Mounting Type: SURFACE MOUNT; Resistance: 10 ohm; Rated Power Dissipation (P): .125 W; Maximum Operating Temperature: 125 Cel; Tolerance: 1 %;

Details

2N7002

Continental Device India

N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .83 W; Package Body Material: PLASTIC/EPOXY; JEDEC-95 Code: TO-236AB;

Details

1N4148WS

Good-ark Electronics

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

NDT2955

National Semiconductor

P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 3 W; JESD-609 Code: e0; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR;

Details

BAV99

Motorola

RECTIFIER DIODE; Surface Mount: YES; Maximum Output Current: .1 A; Maximum Reverse Recovery Time: .006 us; Maximum Repetitive Peak Reverse Voltage: 70 V; JESD-609 Code: e0;

Details

INA826AIDGKR

Texas Instruments

INA826AIDGKR by Texas Instruments is an instrumentation amplifier with 150uV max input offset voltage, 0.095uA max average bias current, and 1MHz nominal bandwidth. Ideal for automotive applications due to its -40 to 125 °C operating temperature range and high common mode rejection ratio of 120dB.

Details

SMBJ18CA

Brightking

TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

BAV99

Frontier Electronics

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

CRGCQ0805F10R

TE Connectivity

TE Connectivity's CRGCQ0805F10R is a 10 ohm fixed resistor with 1% tolerance and 400 ppm/°C temperature coefficient. It is a surface mount thick film resistor in an 0805 package, suitable for applications requiring precise resistance values in compact electronic circuits.

Details

1N4148WS

Surge Components

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

LL4148

Changzhou Starsea Electronics

RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;

Details

BSS138

Changzhou Galaxy Century Microelectronics

N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Time At Peak Reflow Temperature (s): NOT SPECIFIED; Minimum DS Breakdown Voltage: 50 V; Maximum Operating Temperature: 150 Cel;

Details

LL4148

Yangzhou Yangjie Electronics

RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;

Details

LFXTAL025159REEL

Iqd Frequency Products

LFXTAL025159REEL by IQD Frequency Products is a 32.768 kHz crystal oscillator with 20 ppm frequency tolerance and 40,000 ohm series resistance. It is ideal for applications requiring precise timekeeping, such as real-time clocks in IoT devices or microcontrollers in wearables. The surface-mount design with a drive level of 1 uW makes it suitable for compact electronic systems.

Details

AT90CAN128-16AUR

Microchip Technology

AT90CAN128-16AUR by Microchip: 16 MHz clock, 8-bit data RAM, and 131072 ROM words. Ideal for industrial applications with CAN, SPI, TWI connectivity and low power mode. Contains 4 timers, 8 ADC channels, and supports up to 10-bit analog to digital conversion.

Details

LM7805CT

Silicon Group

Other Regulators; No. of Terminals: 3; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 5 %; Package Body Material: PLASTIC/EPOXY; Maximum Load Regulation: .05 %;

Details

SMBJ18CA

Secos

TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

2902037

Phoenix Contact

MODULAR TERMINAL BLOCK;

Details

SS14

Fairchild Semiconductor

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

A1454KLETR-2F-T Technical Details

TYPE	DESCRIPTION
Minimum Supply Voltage:	2.65 V
Other Names:	620-1734-6 2156-A1454KLETR-2F-T A1454KLETR-2F 620-1734-1 620-1734-2
Maximum Operating Current:	5 mA
Maximum Supply Voltage:	3.5 V
Output Type:	DIGITAL VOLTAGE
Minimum Operating Temperature:	-40 Cel
Mounting Feature:	SURFACE MOUNT
Body Width:	3 inch
Sensors or Transducers Type:	MAGNETIC FIELD SENSOR,HALL EFFECT
Package Shape or Style:	RECTANGULAR
Termination Type:	SOLDER
Output Interface Type:	I2C INTERFACE
Body Height:	1.1 mm
Body Length/Diameter:	4.4 mm
Maximum Operating Temperature:	125 Cel

Category Top Products

HMC1001-RC

Honeywell Sensing And Control

Honeywell Sensing And Control's HMC1001-RC is a magnetic field sensor with 8 terminals, operating b/w -40 to 85°C. It has a supply voltage range of 2-12V and can detect magnetic fields from -0.2 to 0.2 mT. Ideal for applications requiring precise magnetoresistive sensing in a compact rectangular package.

DRV5023BIQLPGQ1

Texas Instruments

Texas Instruments' DRV5023BIQLPGQ1 is a magnetic field sensor with hysteresis of 8.5 mT, operating temperature range from -40 to 125 °C, and output current up to 30 A. Ideal for automotive applications due to AEC-Q100 screening level and unipolar input mode.

SS451A

Honeywell Sensing And Control

MAGNETIC FIELD SENSOR,HALL EFFECT;

TLE4998C3XALA1

Infineon Technologies

TLE4998C3XALA1 by Infineon: Magnetic field sensor with 5V max supply, 0.005mT hysteresis, and -40 to 150°C temp range. Ideal for hall effect sensing in automotive applications.

HAL825UT-A

Micronas Semiconductor Holding Ag

MAGNETIC FIELD SENSOR,HALL EFFECT; Mounting Feature: THROUGH HOLE MOUNT; Output Type: ANALOG VOLTAGE; Package Shape or Style: RECTANGULAR; Maximum Output Current: 1 A; Minimum Range Of Magnetic Field: -.5 mT;

A1103ELHLT-T

Allegro MicroSystems

Allegro MicroSystems A1103ELHLT-T is a Hall effect magnetic field sensor with 24V max supply voltage, -40 to 85°C operating temp range, and 5.5mT hysteresis. Ideal for automotive applications due to AEC-Q100 screening level, providing voltage output with a magnetic field range of 1.5-35.5 mT.

TLE4998S8XUMA1

Infineon Technologies

TLE4998S8XUMA1 by Infineon is a magnetic field sensor with 4.5-5.5V supply voltage range, -40 to 125°C operating temperature, and 0-5mA digital current output. It is used for detecting magnetic fields up to 200mT in applications requiring surface mount installation and solder termination.

TLE4961-1M

Infineon Technologies

TLE4961-1M by Infineon: 32V max supply, 4mT hysteresis, 0-25mA output range. Ideal for Hall effect magnetic field sensing in automotive and industrial applications.

DRV5023AJQLPGMQ1

Texas Instruments

DRV5023AJQLPGMQ1 by Texas Instruments is a magnetic field sensor with hysteresis of 3.7 mT, operating temperature range from -40 to 125°C, and output current up to 30 A. Ideal for automotive applications due to AEC-Q100 screening level, it features a digital current output via open-drain interface in a rectangular package style.

MLX91208LDC-CAH-000-TU

Melexis N V

MLX91208LDC-CAH-000-TU by Melexis N V is a magnetic field sensor with 5V supply, -25 to 25mT range, and AEC-Q100 screening. Ideal for automotive applications due to its Hall effect technology, single-ended output, and AEC-Q100 compliance. With a compact size of 4.89mm x 3.9mm x 1.64mm, it's suitable for surface mount installations in harsh environments.

A1211LUA-T

Allegro MicroSystems

Allegro MicroSystems' A1211LUA-T is a magnetic field sensor with 24V max supply voltage, 18mT hysteresis, and 400mV output range. Ideal for applications requiring precise non-inverting analog voltage output in a compact rectangular package.

SS466A-T3

Honeywell Sensing And Control

MAGNETIC FIELD SENSOR,HALL EFFECT; Power Supplies (V): 3.8/30;

MMC5983MA

Memsic

MMC5983MA by Memsic is a magnetic field sensor with a supply voltage range of 2.8V to 3.6V and operating temperature from -40°C to 105°C. It offers an output range of 0.60-2.40V in digital voltage format via open-drain interface, making it suitable for automotive applications requiring precise magnetic field measurements in compact spaces.

SS466A

Micro Switch

MAGNETIC FIELD SENSOR,HALL EFFECT; Mounting Feature: THROUGH HOLE MOUNT; Output Type: ANALOG VOLTAGE; Package Shape or Style: RECTANGULAR; Minimum Operating Temperature: -40 Cel; Maximum Operating Temperature: 150 Cel;

DRV5015A2QDBZR

Texas Instruments

DRV5015A2QDBZR by Texas Instruments is a magnetic field sensor with a supply voltage range of 2.5V to 5.5V and hysteresis of 3.6mT, ideal for applications requiring precise current output up to 20mA in temperatures ranging from -40°C to 125°C. This rectangular sensor features an open-drain output type and latched bipolar input mode, making it suitable for surface mount installations in various industries.

SS495A-T3

Honeywell Sensing And Control

SS495A-T3 by Honeywell is a magnetic field sensor with 10.5V max supply voltage, 1.57" body width, and 3mm body height. It features a transistor output circuit type and operates b/w -40 to 150°C. Ideal for applications requiring precise sensing of magnetic fields in industrial automation and automotive systems.

RR122-1B12-512

Coto Technology

MAGNETIC FIELD SENSOR,MAGNETORESISTIVE;

US1881EUA-AAA-000-BU

Melexis N V

Melexis N V's US1881EUA-AAA-000-BU is a magnetic field sensor with 24V max supply, 12mT hysteresis, and -40 to 85°C operating temp range. Ideal for applications requiring voltage output sensing in a compact rectangular package.

A1308LLHLX-2-T

Allegro MicroSystems

Allegro MicroSystems' A1308LLHLX-2-T is a magnetic field sensor with 4.5-5.5V supply voltage range, -40 to 150°C operating temperature, and 2.5mV/G sensitivity. Ideal for applications requiring precise analog voltage output based on Hall effect technology in compact surface mount package.

SS496B-S

Honeywell Sensing And Control

MAGNETIC FIELD SENSOR,HALL EFFECT;