SS494B-T2 by Honeywell Sensing And Control

Image shown is a representation only. Exact specifications should be obtained from the product data sheet.

SS494B-T2

Manufacturer

Honeywell Sensing And Control
Manufacturer's Part Number

SS494B-T2
Description

MAGNETIC FIELD SENSOR,HALL EFFECT; Mounting Feature: THROUGH HOLE MOUNT; No. of Terminals: 3; Output Type: ANALOG CURRENT; Package Shape or Style: RECTANGULAR; Maximum Operating Current: 8.7 mA;
Datasheet

Datasheet

Not In Stock

Popular Products

ABS25-32.768KHZ-1-T

Abracon

Abracon's ABS25-32.768KHZ-1-T crystal oscillator offers 10 ppm frequency tolerance, 126% stability, and 50000 ohm series resistance. Ideal for applications requiring 0.032768 MHz nominal operating frequency, such as IoT devices and precision timing systems.

Details

BAV99

Meritek Electronics

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

LL4148

International Semiconductor

RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;

Details

LM317T

Fairchild Semiconductor

ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; Maximum Output Current-1: 1.5 A; No. of Outputs: 1; Qualification Status: Not Qualified;

Details

1N4148

Terry Semiconductor

RECTIFIER DIODE; Surface Mount: NO; Maximum Reverse Recovery Time: .004 us; Config: SINGLE; JESD-609 Code: e0; Maximum Repetitive Peak Reverse Voltage: 100 V;

Details

2N2222A

Texas Instruments

2N2222A by Texas Instruments is a small signal NPN bipolar junction transistor (BJT) with a max collector-emitter voltage of 40V and a max collector current of 0.8A. It is commonly used for switching applications due to its fast turn on/off times (35ns/285ns) and high transition frequency (300MHz).

Details

FT232RQ-REEL

FTDI

FTDI's FT232RQ-REEL is a USB bus controller with 32 terminals, operating at 3.3-5.25V. It supports data transfer rates up to 60MBps and clock frequency of 12.02MHz, suitable for RS232/RS422/RS485 interfaces in various applications like industrial automation and communication systems.

Details

SMBJ18CA

Alpha & Omega Semiconductor

TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

M39029/56-351

Amphenol

CONNECTOR ACCESSORY; Minimum Operating Temperature: -65 Cel; Additional Features: STANDARD: MIL-DTL-38999; Contact Gender: FEMALE; MIL-Connector Accessory Name: CONTACT; Associated Military - Specifications: MIL-DTL-38999;

Details

LM555CMX

Texas Instruments

LM555CMX by Texas Instruments is an Analog Waveform Generation IC with 8 terminals. It operates at a nominal voltage of 5V and supports power supplies ranging from 5V to 15V. This versatile IC, housed in a small outline package, is commonly used for pulse and rectangular waveform generation in commercial temperature environments.

Details

LM2931Z-5.0G

Onsemi

LM2931Z-5.0G by Onsemi is a Fixed Positive Single Output LDO Regulator with 5V output voltage, 0.6V dropout voltage, and 0.1A output current. It is ideal for applications requiring stable power supply in temperature-sensitive environments due to its operating range of -40°C to 125°C.

Details

2N7002

Vishay Intertechnology

2N7002 by Vishay Intertechnology is a N-CHANNEL FET with 60V DS Breakdown Voltage, 0.115A Drain Current, and 7.5 ohm On Resistance. Ideal for SWITCHING applications due to its SINGLE configuration with BUILT-IN DIODE. Operates in ENHANCEMENT MODE, suitable for surface mount with GULL WING terminals.

Details

1N4148WT

Taitron Components

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

BAV99

STMicroelectronics

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

LL4148-GS08

Vishay Intertechnology

The Vishay Intertechnology LL4148-GS08 is a glass diode with fast recovery time of 0.008 us and max reverse current of 5 uA. Ideal for applications requiring rectification, it has a breakdown voltage of 100 V and can handle a peak forward current of 2 A.

Details

LM78L05ACMX/NOPB

Texas Instruments

LM78L05ACMX/NOPB by Texas Instruments is a fixed positive single output standard regulator with an output voltage of 5V and max current of 0.1A. It operates b/w 0-125°C, has a dropout voltage of 1.6V, and can handle input voltages up to 30V making it ideal for various electronic applications requiring stable power supply.

Details

LM555CM

Intersil

Analog Waveform Generation Functions; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;

Details

LM317T

Comset Semiconductors

Other Regulators; No. of Terminals: 3; Terminal Pitch: 2.54 mm; Minimum Output Voltage-1: 1.2 V; Technology: BIPOLAR; Operating Temperature (TJ-Max): 125 Cel;

Details

LL4148

TDK

RECTIFIER DIODE; Surface Mount: YES; Terminal Finish: Tin/Lead (Sn/Pb); No. of Phases: 1; No. of Elements: 1; Maximum Output Current: .2 A;

Details

LL4148

Vishay Telefunken

RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;

Details

SS494B-T2 Technical Details

TYPE	DESCRIPTION
Minimum Supply Voltage:	4.5 V
Minimum Range Of Magnetic Field:	-42 mT
Package Body Material:	PLASTIC/EPOXY
Maximum Operating Current:	8.7 mA
Maximum Supply Voltage:	10.5 V
Output Type:	ANALOG CURRENT
Sub-Category:	Other Sensors
Sensitivity (mV/G):	5 mV/G
Output Circuit Type:	TRANSISTOR
Minimum Operating Temperature:	-40 Cel
Mounting Feature:	THROUGH HOLE MOUNT
Body Width:	1.57 inch
Sensors or Transducers Type:	MAGNETIC FIELD SENSOR,HALL EFFECT
No. of Terminals:	3
Package Equivalence Code:	SIP3,.1,50
Maximum Magnetic Field Range:	42 mT
Package Shape or Style:	RECTANGULAR
Termination Type:	PIN
Output (V):	OPEN-COLLECTOR
Linearity (%):	-1.5
Body Height:	3 mm
Body Length/Diameter:	4.06 mm
Maximum Operating Temperature:	150 Cel
Power Supplies (V):	5

Category Top Products

DRV5055A2QLPGM

Texas Instruments

DRV5055A2QLPGM by Texas Instruments is a magnetic field sensor with a supply voltage range of 3V to 3.63V and operating temperatures from -40°C to 125°C. It features an output current range of -1-1mA, making it ideal for applications requiring precise analog current output in a compact rectangular package with through-hole mounting capability.

A1469LK-T

Allegro MicroSystems

Allegro MicroSystems' A1469LK-T is a Hall effect magnetic field sensor with 4-26.5V supply voltage range, -40 to 150°C operating temperature, and 30-85mA current output. Ideal for applications requiring precise magnetic field detection in a compact rectangular package with through-hole mounting.

DRV5055A3QLPG

Texas Instruments

DRV5055A3QLPG by Texas Instruments is a magnetic field sensor with a max supply voltage of 3.63V and an output range of -1-1mA. It is commonly used in applications such as automotive, industrial, and consumer electronics for measuring magnetic fields.

SS46

Honeywell Sensing And Control

MAGNETIC FIELD SENSOR,HALL EFFECT; Mounting Feature: THROUGH HOLE MOUNT; Output Type: ANALOG VOLTAGE; Package Shape or Style: RECTANGULAR; Output Range: 0.40V; Maximum Operating Current: 9 mA;

A1325LLHLX-T

Allegro MicroSystems

Allegro MicroSystems' A1325LLHLX-T is a magnetic field sensor with 1.5% linearity, 3125 mV/G sensitivity, and analog voltage output. Ideal for applications requiring precise magnetic field measurements in temperatures ranging from -40 to 150°C.

AH3574-SA-7

Diodes Incorporated

MAGNETIC FIELD SENSOR,HALL EFFECT; Terminal Finish: MATTE TIN; JESD-609 Code: e3;

MRMS201A-001

Murata Manufacturing

MRMS201A-001 by Murata is a MAGNETIC FIELD SENSOR with 1.6-3.5V supply, -40 to 85°C temp range, and 0.5-2.5 mT field range. It has VOLTAGE OUTPUT suitable for surface mount applications in various industries like automotive and consumer electronics.

DRV5056A1QLPGM

Texas Instruments

Texas Instruments' DRV5056A1QLPGM is a magnetic field sensor with 3-3.63V supply voltage range, -40 to 125°C operating temperature, and 19mT min magnetic field range. Ideal for applications requiring Hall effect sensors, it offers analog voltage output from 0.535-3.1V and can handle up to 10mA current.

AH3582-P-A

Diodes Incorporated

MAGNETIC FIELD SENSOR,HALL EFFECT; Mounting Feature: THROUGH HOLE MOUNT; Output Type: CURRENT OUTPUT; Package Shape or Style: RECTANGULAR; Output Range: 30-55mA; Body Width: 1.5 inch;

A1244LUA-I1-T

Allegro MicroSystems

MAGNETIC FIELD SENSOR,HALL EFFECT; Mounting Feature: THROUGH HOLE MOUNT; No. of Terminals: 3; Output Type: ANALOG CURRENT; Package Shape or Style: RECTANGULAR; Package Body Material: PLASTIC/EPOXY;

HAL880UT-K

Micronas Semiconductor Holding Ag

MAGNETIC FIELD SENSOR,HALL EFFECT; Mounting Feature: THROUGH HOLE MOUNT; Output Type: ANALOG CURRENT; Package Shape or Style: RECTANGULAR; Output Range: -1.0-1.0mA; Body Height: 5.05 mm;

TLE4998S3XA

Infineon Technologies

TLE4998S3XA by Infineon is a magnetic field sensor with 5V max supply voltage, 0.1% linearity, and 18V output range. Ideal for applications requiring precise current output in the range of -40 to 150°C, such as automotive systems and industrial automation due to its high sensitivity and wide magnetic field range capabilities.

TMAG5273A1QDBVR

Texas Instruments

TMAG5273A1QDBVR by Texas Instruments is a 6-terminal magnetic field sensor with voltage output range of 0-5.5V, ideal for Hall effect applications. It operates b/w -40 to 125°C, with max supply voltage of 3.6V and output current up to 2A. Suitable for surface mount installations in various electronic devices.

SS94A1

Micro Switch

MAGNETIC FIELD SENSOR,HALL EFFECT; Mounting Feature: THROUGH HOLE MOUNT; Output Type: ANALOG CURRENT; Package Shape or Style: RECTANGULAR; Output Range: 1mA; Body Width: 1.8 inch;

TMAG5170A2QDGKR

Texas Instruments

TMAG5170A2QDGKR by Texas Instruments is a magnetic field sensor with voltage output. It operates b/w -40 to 150°C, with supply voltage range of 2.3-5.5V and output range of 0.4-4.6V. Ideal for applications requiring precise magnetic field measurements in compact spaces like automotive sensors or industrial automation systems.

AH1911-W-7

Diodes Incorporated

Diodes Inc. AH1911-W-7 is a magnetic field sensor with 5.5V max supply, 1.6V min supply, and 1.5mT hysteresis. Ideal for hall effect applications, it offers digital voltage output in a compact rectangular package suitable for surface mount installations at temperatures ranging from -40 to 85°C.

SI7212-B-00-IVR

Silicon Labs

MAGNETIC FIELD SENSOR,HALL EFFECT; Terminal Finish: Matte Tin (Sn); JESD-609 Code: e3;

MLX90248ESE-EBA-000-RE

Melexis N V

MLX90248ESE-EBA-000-RE by Melexis N V is a magnetic field sensor with 3.6V max supply, 2.3mT hysteresis, and -40 to 85°C operating range. It's ideal for current output applications requiring a compact rectangular package with omnidirectional sensing capabilities in the range of -0.8mT to 6mT.

AH1925-HK4-7

Diodes Incorporated

Magnetic Field Sensors; Terminal Finish: NICKEL PALLADIUM GOLD; JESD-609 Code: e4;

HAL1002UT-A

TDK

HAL1002UT-A by TDK is a magnetic field sensor with 4.5-8.5V supply voltage range, -40 to 150°C operating temperature, and 1.2A max output current. Ideal for applications requiring precise current output in a compact rectangular package with through-hole mounting feature.