Image shown is a representation only. Exact specifications should be obtained from the product data sheet.

A1192LUA-T

Manufacturer

Allegro MicroSystems
Manufacturer's Part Number

A1192LUA-T
Description

MAGNETIC FIELD SENSOR,HALL EFFECT; Mounting Feature: THROUGH HOLE MOUNT; No. of Terminals: 3; Output Type: ANALOG CURRENT; Package Shape or Style: RECTANGULAR; Maximum Operating Temperature: 150 Cel;
Datasheet

Datasheet

Not In Stock

Popular Products

LM358AN

Texas Instruments

LM358AN by Texas Instruments is an Operational Amplifier with 2 functions. It has a Max Input Offset Voltage of 5000 uV and Nominal Common Mode Reject Ratio of 85 dB. Widely used in voltage-feedback applications due to its high Min Voltage Gain of 15000 and Unity Gain Bandwidth of 1000 kHz.

Details

KSZ9031RNXIA

Microchip Technology

KSZ9031RNXIA by Microchip is a 48-terminal Ethernet transceiver with data rate of 1000 Mbps. Operating temperature range from -40 to 85°C makes it suitable for industrial applications. This square-shaped chip carrier has a very thin profile and matte tin finish, ideal for network interfaces.

Details

USB2514BI-AEZG

Standard Microsystems

BUS CONTROLLER, UNIVERSAL SERIAL BUS; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 36; Package Code: HVQCCN; Package Shape: SQUARE;

Details

SMBJ18CA

Sangdest Microelectronics (Nanjing)

TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

SZNUP2105LT1G

Onsemi

SZNUP2105LT1G by Onsemi is a Transient Suppression Device with 2 elements in a common anode configuration. It has a max non-repetitive peak reverse power dissipation of 350W and breakdown voltage of 29.1V. Ideal for applications requiring bidirectional polarity protection, such as automotive electronics and industrial equipment due to its AEC-Q101 compliance and high clamping voltage of 44V.

Details

LM358N

Onsemi

OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;

Details

ULN-2803A

Vishay Sprague

Vishay Sprague's ULN-2803A is an 8-bit peripheral driver with a max supply voltage of 3V. Featuring open-collector output characteristics, it offers built-in transient protections and operates b/w -20°C to 85°C. Ideal for applications requiring sink current flow direction, this rectangular-shaped driver has a terminal pitch of 2.54mm and turn-on/off time of 1us.

Details

SS14

Jgd Semiconductors

RECTIFIER DIODE; Surface Mount: YES; Technology: SCHOTTKY; Maximum Non Repetitive Peak Forward Current: 30 A; Maximum Forward Voltage (VF): .55 V; No. of Phases: 1;

Details

BAV99

Infinex

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

LM358DT

ROHM

OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: LSOP; Package Shape: RECTANGULAR;

Details

M39029/56351

Souriau-sunbank Connection Technologies

Souriau-sunbank's M39029/56351 is a CRIMP contact type backshell accessory compliant with MIL-DTL-38999. It features FEMALE gender contacts, compatible with M39029/58363 mating contacts. The insertion and removal tools required are M81969/14-10 and M22520/2-10 respectively, making it ideal for military connector applications.

Details

FDD5614P

Onsemi

FDD5614P by Onsemi is a P-CHANNEL Power FET with 60V DS Breakdown Voltage, ideal for SWITCHING applications. It features 45A IDM and 0.1 ohm RDS(ON), operating in ENHANCEMENT MODE at up to 175°C. The PLASTIC/EPOXY package with GULL WING terminals ensures efficient heat dissipation and reliable performance.

Details

LL4148

Bytesonic Electronics

RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;

Details

SS14

Frontier Electronics

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

BSS123,215

NXP Semiconductors

NXP Semiconductors' BSS123,215 is a N-CHANNEL FET for SWITCHING applications. Features include 100V DS Breakdown Voltage, 0.17A Drain Current, and 6 ohm On Resistance. With GULL WING terminals and ENHANCEMENT MODE operation, it's ideal for small outline packages in various electronic devices.

Details

BSS138

North American Philips Discrete Products Div

N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; No. of Elements: 1; Maximum Drain Current (Abs) (ID): .2 A;

Details

FDC5614P

MSKSEMI SEMICONDUCTOR

P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 2 W; Transistor Element Material: SILICON; Minimum DS Breakdown Voltage: 60 V;

Details

M24308/2-1F

Defense Logistics Agency

D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Mounting Type: CABLE AND PANEL; Mating Info.: MULTIPLE MATING PARTS AVAILABLE; Empty Shell: NO;

Details

BAV99

Bkc Semiconductors

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

2N7002

Central Semiconductor

N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Maximum Drain Current (ID): .115 A; Maximum Drain Current (Abs) (ID): .115 A;

Details

A1192LUA-T Technical Details

TYPE	DESCRIPTION
Minimum Supply Voltage:	3 V
Minimum Range Of Magnetic Field:	1 mT
Package Body Material:	PLASTIC/EPOXY
Maximum Operating Current:	6.9 mA
Output Type:	ANALOG CURRENT
Sub-Category:	Other Sensors/Transducers
Terminal Finish:	MATTE TIN
No. of Terminals:	3
Termination Type:	SOLDER
Technology:	BICMOS
Input Mode:	UNIPOLAR
Output Interface Type:	2-WIRE INTERFACE
Maximum Operating Temperature:	150 Cel
Hysteresis:	3 mT
Other Names:	620-1407 ALLALLA1192LUA-T A1192LUAT 2156-A1192LUA-T
Maximum Supply Voltage:	24 V
JESD-609 Code:	e3
Minimum Operating Temperature:	-40 Cel
Mounting Feature:	THROUGH HOLE MOUNT
Body Width:	1.52 inch
Sensors or Transducers Type:	MAGNETIC FIELD SENSOR,HALL EFFECT
Package Equivalence Code:	SIP3,.03,50
Maximum Magnetic Field Range:	20 mT
Package Shape or Style:	RECTANGULAR
Body Height:	4.12 mm
Body Length/Diameter:	4.09 mm
Power Supplies (V):	3/24

Category Top Products

TLE49642MXTSA1/SAMPLE

Infineon Technologies

TLE49642MXTSA1/SAMPLE by Infineon Technologies is a magnetic field sensor with a max supply voltage of 32V and hysteresis of 5.5mT. It has a current output range of 0-25mA and is commonly used in applications such as automotive systems, industrial automation, and robotics.

MRMS511X-001

Murata Manufacturing

MRMS511X-001 by Murata is a magnetic field sensor with 1.2" width, 0.55mm height, and 3.5V max supply voltage. It operates b/w -40 to 85°C, outputs 0.2-1.6V voltage range, and detects magnetic fields from 0.8mT to 2mT. Ideal for surface mount applications requiring precise magnetoresistive sensing capabilities.

A1102ELHLT-T

Allegro MicroSystems

Allegro MicroSystems' A1102ELHLT-T is a magnetic field sensor with 24V max supply voltage, -40 to 85°C operating temp range, and 5.5mT hysteresis. Ideal for automotive applications due to AEC-Q100 screening level, BICMOS technology, and compact rectangular package design.

A1250LLHLT-T

Allegro MicroSystems

Allegro MicroSystems' A1250LLHLT-T is a magnetic field sensor with 3 terminals, offering a current output range of 30-60mA. It operates b/w -40 to 150°C, with a max supply voltage of 24V. Ideal for automotive applications due to AEC-Q100 and ISO-26262 screening levels.

SS466A-L

Honeywell Sensing And Control

SS466A-L by Honeywell is a magnetic field sensor with a supply voltage range of 3.8V to 30V and operating temperatures from -40°C to 150°C. It offers a digital current output up to 20mA, suitable for applications requiring precise magnetic field detection in various industries. With a compact rectangular design and through-hole mounting feature, it provides reliable performance in detecting magnetic fields ranging from -18mT to +18mT.

55075-00-05-A

Hamlin Electronics Europe

MAGNETIC FIELD SENSOR,HALL EFFECT; Output Type: DIGITAL CURRENT; Package Shape or Style: CYLINDRICAL; Output Range: 20mA; Maximum Supply Voltage: 25.2 V; Minimum Operating Temperature: -40 Cel;

A1193LUA-T

Allegro MicroSystems

Allegro MicroSystems A1193LUA-T is a magnetic field sensor with 3mT hysteresis, 24V max supply voltage, and 1mT min magnetic field range. Ideal for applications requiring precise analog current output in temperature ranges from -40 to 150°C.

SS495A-S

Micro Switch

MAGNETIC FIELD SENSOR,HALL EFFECT; Mounting Feature: SURFACE MOUNT; No. of Terminals: 3; Output Type: VOLTAGE OUTPUT; Package Shape or Style: RECTANGULAR; Body Length/Diameter: 4.06 mm;

A3516LUA

Sanken Electric

MAGNETIC FIELD SENSOR,HALL EFFECT; Package Shape or Style: RECTANGULAR; Body Height: 5.11 mm; Body Width: 1.52 inch; Housing: PLASTIC; Body Length/Diameter: 4.1 mm;

S-5715DCSL1-I4T1U

Ablic

Ablic's S-5715DCSL1-I4T1U is a magnetic field sensor with 0.8 mT hysteresis, 2.7-5.5V supply voltage range, and digital output of 0.40-4.60V. Ideal for applications requiring precise detection of magnetic fields in a compact rectangular package for surface mount installations.

ALS31313KLEATR-JOY

Allegro MicroSystems

MAGNETIC FIELD SENSOR,HALL EFFECT;

AH1913-W-7

Diodes Incorporated

MAGNETIC FIELD SENSOR,HALL EFFECT; JESD-609 Code: e3; Terminal Finish: MATTE TIN;

AH1911-W-7

Diodes Incorporated

Diodes Inc. AH1911-W-7 is a magnetic field sensor with 5.5V max supply, 1.6V min supply, and 1.5mT hysteresis. Ideal for hall effect applications, it offers digital voltage output in a compact rectangular package suitable for surface mount installations at temperatures ranging from -40 to 85°C.

DRV5013ADQLPGM

Texas Instruments

DRV5013ADQLPGM by Texas Instruments is a magnetic field sensor with 38V supply voltage, 5.4mT hysteresis, and 1.52" body width. It operates in temperatures from -40°C to 125°C, outputting digital voltage via open-drain up to 30A current. Ideal for applications requiring precise magnetic field detection in compact spaces.

DRV5012AEDMRR

Texas Instruments

Texas Instruments' DRV5012AEDMRR is a magnetic field sensor with 5.5V max supply voltage, -40 to 85°C operating temp range, and 4mT hysteresis. Ideal for applications requiring digital current output in a compact rectangular package.

DRV5055A1EDBZRQ1

Texas Instruments

DRV5055A1EDBZRQ1 by Texas Instruments is a magnetic field sensor with an output range of -1-1mA. It operates b/w -40 to 150°C, suitable for automotive applications due to AEC-Q100 screening and surface mounting feature. The sensor has a max supply voltage of 3.63V and max output current of 1A.

A1302KLHLX-T

Allegro MicroSystems

Allegro MicroSystems' A1302KLHLX-T is a magnetic field sensor with 3 terminals, offering a sensitivity of 1.3 mV/G and linearity of 2.5%. Operating b/w -40 to 125 °C, it outputs digital voltage in the range of 0.25-4.65V, making it ideal for applications requiring precise magnetic field detection.

DRV5055A4QDBZR

Texas Instruments

DRV5055A4QDBZR by Texas Instruments is a magnetic field sensor with a supply voltage range of 3-3.63V and operating temperature from -40 to 125°C. It features an output current range of -1-1mA, making it ideal for applications requiring precise analog current output in a compact rectangular package suitable for surface mounting.

APS12230LUAA

Allegro MicroSystems

MAGNETIC FIELD SENSOR,HALL EFFECT;

AH182-WG-7

Diodes Incorporated

AH182-WG-7 by Diodes Inc. is a magnetic field sensor with 1mT hysteresis, 5.5V max supply voltage, and 0.30V output range. Ideal for applications requiring Hall effect sensors, it operates b/w -40 to 85°C and has a non-inverting analog voltage output suitable for surface mounting.