Image shown is a representation only. Exact specifications should be obtained from the product data sheet.

A3230LLHLT-T

Manufacturer

Allegro MicroSystems
Manufacturer's Part Number

A3230LLHLT-T
Description

MAGNETIC FIELD SENSOR,HALL EFFECT; Mounting Feature: SURFACE MOUNT; Output Type: CURRENT OUTPUT; Package Shape or Style: RECTANGULAR; Output Range: 30-60mA; Maximum Operating Current: 3.5 mA;
Datasheet

Datasheet

Not In Stock

Popular Products

2N7002

Secos

N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .3 W; Maximum Drain Current (ID): .115 A; Maximum Drain-Source On Resistance: 7.5 ohm;

Details

2N2222A

Raytheon Semiconductor

NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Minimum DC Current Gain (hFE): 100; Maximum Turn On Time (ton): 35 ns;

Details

1N4148

Panjit International

RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;

Details

B340A-13-F

SPC TECHNOLOGY/ MULTICOMP

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

BAV99

Secos

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

M39029/58-360

Defense Logistics Agency

CONNECTOR ACCESSORY; Contact Type: CRIMP REAR RELEASE; Mating Contacts: M39029/56-348, M39029/57-354; Insertion Tool Sources: MILITARY; Contact Gender: MALE; Alternate Contact Sources: MILITARY;

Details

2902037

Phoenix Contact

MODULAR TERMINAL BLOCK;

Details

LL4148

Kec

RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;

Details

LM358MX

ROHM

OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: LSOP; Package Shape: RECTANGULAR;

Details

OPA2227UA

Texas Instruments

OPA2227UA by Texas Instruments is a dual operational amplifier with low-offset voltage of 200 uV and bias current of 0.01 uA. It operates at temperatures ranging from -40 to 85 °C, making it suitable for industrial applications requiring precise signal amplification. With a unity gain bandwidth of 8000 kHz, this op amp is ideal for high-frequency circuit designs.

Details

SMBJ18CA

International Semiconductor

TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Maximum Clamping Voltage: 29.2 V; Nominal Breakdown Voltage: 21.1 V; Maximum Repetitive Peak Reverse Voltage: 18 V; Polarity: BIDIRECTIONAL;

Details

2N7002

Transys Electronics

N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Minimum DS Breakdown Voltage: 60 V; Maximum Operating Temperature: 150 Cel;

Details

1N4148

Dc Components

RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;

Details

BSS138

Philips Semiconductors

N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Operating Mode: ENHANCEMENT MODE; Maximum Operating Temperature: 150 Cel;

Details

FDC5614P

Fairchild Semiconductor

P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 1.6 W; Transistor Application: SWITCHING; Maximum Drain Current (ID): 3 A;

Details

NE555D

Texas Instruments

NE555D by Texas Instruments is an 8-terminal IC with a supply voltage range of 4.5V to 16V, suitable for analog waveform generation applications. It operates at temperatures from 0°C to 70°C and has a max supply current of 15mA. The package style is small outline, making it ideal for compact electronic designs.

Details

2N7002-7-F

SPC TECHNOLOGY/ MULTICOMP

N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Terminal Form: GULL WING; Package Shape: RECTANGULAR;

Details

STM32H743BIT6

STMicroelectronics

STM32H743BIT6 by STMicroelectronics is a 32-bit microcontroller with Cortex-M7 CPU, 208 terminals, and 1085440 bytes of RAM. It features 2 DAC channels, 32 ADC channels, and operates at a max clock frequency of 48 MHz. Ideal for industrial applications requiring high-speed processing and extensive peripheral connectivity.

Details

BAV99

Rfe International

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

SDR0604-101KL

Bourns

SDR0604-101KL by Bourns is a surface mount fixed inductor with a nominal inductance of 100 uH. It is a general purpose inductor suitable for power applications, with a max rated current of 0.52 A and a self-resonance frequency of 9 MHz.

Details

A3230LLHLT-T Technical Details

TYPE	DESCRIPTION
Minimum Supply Voltage:	3.6 V
Minimum Range Of Magnetic Field:	-2.5 mT
Maximum Operating Current:	3.5 mA
Maximum Supply Voltage:	24 V
Output Range:	30-60mA
Output Type:	CURRENT OUTPUT
Maximum Output Current:	60 A
Terminal Finish:	Matte Tin (Sn)
JESD-609 Code:	e3
Minimum Operating Temperature:	-40 Cel
Mounting Feature:	SURFACE MOUNT
Body Width:	1.975 inch
Sensors or Transducers Type:	MAGNETIC FIELD SENSOR,HALL EFFECT
Maximum Magnetic Field Range:	2.5 mT
Package Shape or Style:	RECTANGULAR
Termination Type:	SOLDER
Body Height:	1.17 mm
Additional Features:	SHORT CIRCUIT PROTECTION, REVERSE BATTERY PROTECTION
Body Length/Diameter:	2.92 mm
Maximum Operating Temperature:	150 Cel
Hysteresis:	1.5 mT

Category Top Products

TLE493DW2B6A1HTSA1

Infineon Technologies

TLE493DW2B6A1HTSA1 by Infineon is a magnetic field sensor with 2.8-3.5V supply, -40 to 125°C temp range, and 160-230mT magnetic field detection. It utilizes Hall effect technology for digital voltage output via I2C interface, ideal for surface mount applications in various industries.

LTS25-NP/SP10

Lem International Sa

LTS25-NP/SP10 by Lem International Sa is a magnetic field sensor with Hall effect technology. It operates b/w -40°C to 85°C, with supply voltage range of 4.75V to 5.25V. This rectangular sensor outputs analog voltage and is ideal for through hole mounting applications.

SS443R

Honeywell Sensing And Control

MAGNETIC FIELD SENSOR,HALL EFFECT;

MLX92231LSE-AAA-010-RE

Melexis N V

MAGNETIC FIELD SENSOR,HALL EFFECT; Mounting Feature: SURFACE MOUNT; No. of Terminals: 3; Output Type: CURRENT OUTPUT; Package Shape or Style: RECTANGULAR; Output Range: 25-70mA;

A3516LUA

Sanken Electric

MAGNETIC FIELD SENSOR,HALL EFFECT; Package Shape or Style: RECTANGULAR; Body Height: 5.11 mm; Body Width: 1.52 inch; Housing: PLASTIC; Body Length/Diameter: 4.1 mm;

A1104LUA-T

Allegro MicroSystems

Allegro MicroSystems' A1104LUA-T is a Hall effect magnetic field sensor with 3 terminals, offering voltage output. It operates b/w -40 to 150°C and can detect magnetic fields ranging from 2.5 to 45 mT. With AEC-Q100 screening, it's ideal for automotive applications requiring precise magnetic field measurements.

TMAG5273A1QDBVR

Texas Instruments

TMAG5273A1QDBVR by Texas Instruments is a 6-terminal magnetic field sensor with voltage output range of 0-5.5V, ideal for Hall effect applications. It operates b/w -40 to 125°C, with max supply voltage of 3.6V and output current up to 2A. Suitable for surface mount installations in various electronic devices.

A3212EELLT-T

Allegro MicroSystems

MAGNETIC FIELD SENSOR,HALL EFFECT; Mounting Feature: SURFACE MOUNT; No. of Terminals: 3; Output Type: DIGITAL CURRENT; Package Shape or Style: SQUARE; Terminal Finish: MATTE TIN;

TLE4906LXA

Infineon Technologies

TLE4906LXA by Infineon is a magnetic field sensor with 2.7-18V supply, 1.5mT hysteresis, and 0.6V digital output range. Ideal for applications requiring precise magnetic field detection in compact spaces due to its small rectangular package design and through-hole mounting feature.

A1222EUA-T

Allegro MicroSystems

Allegro MicroSystems' A1222EUA-T is a magnetic field sensor with 24V supply, 22mT hysteresis, and 30-60mA analog current output. Ideal for applications requiring precise magnetic field detection in a compact package.

A1324LLHLT-T

Allegro MicroSystems

MAGNETIC FIELD SENSOR,HALL EFFECT; Mounting Feature: SURFACE MOUNT; Output Type: ANALOG VOLTAGE; Package Shape or Style: RECTANGULAR; Termination Type: SOLDER; Additional Features: IT HAS SENSITIVITY OF 5 MV/G;

APS11760LUAA-0PL

Allegro MicroSystems

MAGNETIC FIELD SENSOR,HALL EFFECT; Mounting Feature: THROUGH HOLE MOUNT; No. of Terminals: 3; Output Type: DIGITAL VOLTAGE; Package Shape or Style: RECTANGULAR; Maximum Magnetic Field Range: 7 mT;

TLE4905L

Siemens

MAGNETIC FIELD SENSOR,HALL EFFECT; Mounting Feature: THROUGH HOLE MOUNT; Output Type: VOLTAGE OUTPUT; Package Shape or Style: RECTANGULAR; Body Width: 1.52 inch; Body Height: 3.29 mm;

SM351LT

Honeywell Sensing And Control

MAGNETIC FIELD SENSOR,MAGNETORESISTIVE; Power Supplies (V): 1.8/5;

TLE493DW2B6A3HTSA1

Infineon Technologies

TLE493DW2B6A3HTSA1 by Infineon is a magnetic field sensor with 2.8-3.5V supply voltage range, -40 to 125°C operating temperature, and 160-230mT magnetic field range. It features digital voltage output via I2C interface, ideal for surface mount applications in various industries like automotive and consumer electronics.

TLV49613TAXBXA1

Infineon Technologies

Infineon's TLV49613TAXBXA1 is a magnetic field sensor with 3-26V supply, -40 to 125°C temp range, and 0-25mA output. Ideal for hall effect sensing applications due to its compact rectangular design and current output capability.

BU52078GWZ-E2

ROHM

MAGNETIC FIELD SENSOR,HALL EFFECT; Mounting Feature: SURFACE MOUNT; Output Type: VOLTAGE OUTPUT; Package Shape or Style: SQUARE; Output Range: 0.2-1.6V; Maximum Magnetic Field Range: 30 mT;

TMAG5170A1EDGKRQ1

Texas Instruments

TMAG5170A1EDGKRQ1 by Texas Instruments is a magnetic field sensor with 8 terminals, operating voltage range of 2.3V to 5.5V, and digital current output type. AEC-Q100 screening makes it suitable for automotive applications where precise sensing of magnetic fields is required in harsh environments up to 150°C. The sensor's SPI interface and compact square package make it ideal for surface mount installations in automotive systems.

MLX90363KDC-ABB-000-RE

Melexis N V

MLX90363KDC-ABB-000-RE by Melexis N V is a magnetic field sensor with 3.15-3.45V supply voltage range, -40 to 125°C operating temperature, and 20-70mT magnetic field range. It utilizes Hall effect technology for digital voltage output via SPI interface, suitable for automotive and industrial applications requiring precise magnetic field measurements.

DRV5032FADBZT

Texas Instruments

Texas Instruments' DRV5032FADBZT is a magnetic field sensor with hysteresis of 1.5 mT, operating from -40 to 85°C. It features a digital current output range of -5.0-5.0mA and is ideal for applications requiring unipolar input mode sensing in a compact surface-mount package.