Image shown is a representation only. Exact specifications should be obtained from the product data sheet.

A1171EEWLT-P

Manufacturer

Allegro MicroSystems
Manufacturer's Part Number

A1171EEWLT-P
Description

MAGNETIC FIELD SENSOR,HALL EFFECT; Mounting Feature: SURFACE MOUNT; No. of Terminals: 6; Output Type: DIGITAL VOLTAGE; Package Shape or Style: RECTANGULAR; Output Range: 0.30V;
Datasheet

Datasheet

Not In Stock

Popular Products

BSS138

Good-ark Electronics

N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain-Source On Resistance: 6 ohm; Minimum DS Breakdown Voltage: 50 V; Operating Mode: ENHANCEMENT MODE;

Details

SMBJ18CA

Onsemi

TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

M39029/58-360

Fct Electronic

CONNECTOR ACCESSORY; IEC Conformity: NO; Alternate Contact Sources: MILITARY; MIL Conformity: YES; Contact Gender: MALE; MIL-Connector Accessory Name: CONTACT;

Details

SS14

Taiwan Semiconductor

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

1N4148WS

Tak Cheong Electronics Holdings

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

1N4148

National Semiconductor

RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;

Details

2N2222A

Transistor & Electronic

NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;

Details

LL4148

Continental Device India

RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;

Details

FDV303N

Fairchild Semiconductor

N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Transistor Application: SWITCHING; JESD-609 Code: e3;

Details

2N7002

Promax-johnton

N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Terminal Form: GULL WING; Maximum Drain-Source On Resistance: 7.5 ohm; Minimum DS Breakdown Voltage: 60 V;

Details

SMBJ18CA

Lite-on Semiconductor

TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

LM317AEMP/NOPB

Texas Instruments

LM317AEMP/NOPB by Texas Instruments is an adjustable positive single output standard regulator with a max output voltage of 37V and a max output current of 1.5A. It operates in temperatures ranging from -40°C to 125°C, making it suitable for various applications requiring precise voltage regulation in a compact package.

Details

LM107H

Intersil

OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Nominal Common Mode Reject Ratio: 96 dB;

Details

1N4148WS

Diotec Semiconductor Ag

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

2N2222A

Zetex Plc

NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;

Details

ULN2803A

Motorola

NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; Terminal Position: DUAL; JESD-30 Code: R-PDIP-T18;

Details

E8WSDC12-32.768KTR

Ecliptek

PARALLEL - FUNDAMENTAL; Mounting Feature: SURFACE MOUNT; Frequency Tolerance: 20 ppm; Aging: 3 PPM/YEAR; Load Capacitance: 12.5 pF; Nominal Operating Frequency: .032768 MHz;

Details

KSZ9031RNXIC

Microchip Technology

KSZ9031RNXIC by Microchip Technology is a network interface chip with 1 transceiver. It operates at a data rate of 1000 Mbps and has a nominal voltage of 1.2V. This chip is commonly used in industrial applications requiring Ethernet connectivity.

Details

LM358N

Kec

OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;

Details

1N4148WT

Taitron Components

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

A1171EEWLT-P Technical Details

TYPE	DESCRIPTION
Minimum Supply Voltage:	1.65 V
Minimum Range Of Magnetic Field:	.6 mT
Package Body Material:	PLASTIC/EPOXY
Maximum Operating Current:	2 mA
Output Range:	0.30V
Output Type:	DIGITAL VOLTAGE
Maximum Output Current:	1 A
Sub-Category:	Other Sensors/Transducers
Terminal Finish:	NICKEL PALLADIUM GOLD
No. of Terminals:	6
Termination Type:	SOLDER
Input Mode:	UNIPOLAR
Maximum Operating Temperature:	85 Cel
Hysteresis:	.6 mT
Other Names:	620-1232-6 A1171EEWLTP 620-1232-2 620-1232-1
Output Polarity:	COMPLEMENTARY
Maximum Supply Voltage:	3.5 V
JESD-609 Code:	e4
Minimum Operating Temperature:	-40 Cel
Mounting Feature:	SURFACE MOUNT
Body Width:	1.5 inch
Sensors or Transducers Type:	MAGNETIC FIELD SENSOR,HALL EFFECT
Package Equivalence Code:	SOLCC6,.08,20
Maximum Magnetic Field Range:	5.5 mT
Package Shape or Style:	RECTANGULAR
Output (V):	OPEN-DRAIN
Body Height:	.38 mm
Additional Features:	BATTERY OPERATION
Body Length/Diameter:	2 mm
Power Supplies (V):	1.8/3.3

Category Top Products

SS496B

Honeywell Sensing And Control

SS496B by Honeywell Sensing And Control is a magnetic field sensor with a max supply voltage of 10.5V and a body width of 1.57in. It is commonly used in applications that require sensing and control of magnetic fields, such as robotics or automotive systems.

TLE4986CXTSM47HAMA1

Infineon Technologies

TLE4986CXTSM47HAMA1 by Infineon is a magnetic field sensor with 18V max supply voltage, 0.9mT hysteresis, and 7mA max operating current. It is a Hall effect sensor in rectangular package for digital current output. Ideal for applications requiring precise magnetic field detection in automotive and industrial sectors.

SS351AT

Honeywell Sensing And Control

MAGNETIC FIELD SENSOR,HALL EFFECT;

SS94A1F

Micro Switch

MAGNETIC FIELD SENSOR,HALL EFFECT; Mounting Feature: THROUGH HOLE MOUNT; Output Type: ANALOG CURRENT; Package Shape or Style: RECTANGULAR; Output Range: 1mA; Body Length/Diameter: 7.6 mm;

AD22150Y

Analog Devices

AD22150Y by Analog Devices is a Hall effect magnetic field sensor with -1.2 mT to 1.2 mT range, providing digital voltage output. It comes in a rectangular package for through-hole mounting applications, terminated with solder connections. Ideal for precise magnetic field measurements in various industrial and consumer electronics devices.

MMC3630KJ

Memsic

MMC3630KJ by Memsic is a MAGNETIC FIELD SENSOR with 1.2mm body width, 0.64mm height, and 1.2mm length/diameter. It operates b/w -40 to 85°C, has a digital voltage output range of 0.36-1.44V, and uses a 2-wire interface for surface mount applications.

TMAG5273A2QDBVT

Texas Instruments

TMAG5273A2QDBVT by Texas Instruments is a magnetic field sensor with 1.6" body width and 1.1mm height. It operates b/w -40 to 125°C, providing a voltage output range of 0-5.5V. Ideal for applications requiring precise magnetic field detection in compact spaces.

ALS31000LLHALX

Allegro MicroSystems

Allegro MicroSystems' ALS31000LLHALX is a magnetic field sensor with 4.5-5.5V supply voltage range, -40 to 150°C operating temperature, and 11.5mA max current. It outputs analog voltage and uses Hall effect technology for applications like position sensing in automotive systems.

DRV5055A2QLPGM

Texas Instruments

DRV5055A2QLPGM by Texas Instruments is a magnetic field sensor with a supply voltage range of 3V to 3.63V and operating temperatures from -40°C to 125°C. It features an output current range of -1-1mA, making it ideal for applications requiring precise analog current output in a compact rectangular package with through-hole mounting capability.

A1318LLHLT-2-T

Allegro MicroSystems

MAGNETIC FIELD SENSOR,HALL EFFECT; Terminal Finish: MATTE TIN; JESD-609 Code: e3;

DRV5023AJQDBZT

Texas Instruments

DRV5023AJQDBZT by Texas Instruments is a magnetic field sensor with a supply voltage range of 2.5V to 38V and hysteresis of 3.7mT. It operates in temperatures from -40°C to 125°C, providing a digital voltage output via open-drain interface. Ideal for applications requiring precise magnetic field detection in compact designs using surface mount technology.

A1104LUA-T

Allegro MicroSystems

Allegro MicroSystems' A1104LUA-T is a Hall effect magnetic field sensor with 3 terminals, offering voltage output. It operates b/w -40 to 150°C and can detect magnetic fields ranging from 2.5 to 45 mT. With AEC-Q100 screening, it's ideal for automotive applications requiring precise magnetic field measurements.

TLE4964-6M

Infineon Technologies

TLE4964-6M by Infineon is a magnetic field sensor with 3-32V supply, 1mT hysteresis, and 0-25mA current output. Ideal for applications requiring precise magnetic field detection in compact spaces due to its small size (2.9mm x 1mm x 1.3 inch) and surface mount feature.

A1101ELHLT-T

Allegro MicroSystems

Allegro MicroSystems' A1101ELHLT-T is a magnetic field sensor with 24V max supply voltage, -40 to 85°C operating temp range, and 5.5mT hysteresis. Ideal for automotive applications due to AEC-Q100 screening level, BICMOS technology, and 17.5mT max magnetic field range.

DRV5013AGQLPGMQ1

Texas Instruments

DRV5013AGQLPGMQ1 by Texas Instruments is a magnetic field sensor with hysteresis of 12 mT, operating temperature range from -40 to 125 °C, and output current up to 30 A. It is ideal for automotive applications requiring precise current output in a compact rectangular package.

ACS724LMATR-50AU-T

Allegro MicroSystems

Allegro MicroSystems' ACS724LMATR-50AU-T is a magnetic field sensor with voltage output range of 0.5-4.5V, ideal for automotive applications due to AEC-Q100 screening and operating temperature range of -40 to 150°C. It features single-ended output circuit type, BICMOS technology, and surface mounting feature.

AS5013-IQFT

Ams Ag

AS5013-IQFT by Ams Ag is a 2-axis magnetic field sensor with a range of 30-120 mT. It operates b/w -20 to 80°C, with output in digital voltage via open-drain interface. Ideal for surface mount applications requiring precise magnetic field detection.

S-5712ANDL2-M3T1U

Seiko Instruments Usa

MAGNETIC FIELD SENSOR,HALL EFFECT; Mounting Feature: SURFACE MOUNT; Output Type: VOLTAGE OUTPUT; Package Shape or Style: RECTANGULAR; Output Range: 0.4V; Minimum Operating Temperature: -40 Cel;

SS496A1-SP

Honeywell Sensing And Control

SS496A1-SP by Honeywell is a magnetic field sensor with 3-inch body width and 1.57mm height. It operates b/w -40 to 150°C, with sensitivity of 2.5 mV/G and output current type as analog. Ideal for applications requiring precise magnetic field detection in compact spaces.

APS13568KLJATR

Allegro MicroSystems

MAGNETIC FIELD SENSOR,HALL EFFECT;