Image shown is a representation only. Exact specifications should be obtained from the product data sheet.

AH3363Q-SA-7

Manufacturer

Diodes Incorporated
Manufacturer's Part Number

AH3363Q-SA-7
Description

MAGNETIC FIELD SENSOR,HALL EFFECT; Mounting Feature: SURFACE MOUNT; No. of Terminals: 3; Output Type: CURRENT OUTPUT; Package Shape or Style: RECTANGULAR; Screening Level: AEC-Q100;
Datasheet

Datasheet

Not In Stock

Popular Products

LL4148

Itt Components

RECTIFIER DIODE; Surface Mount: YES; Maximum Reverse Recovery Time: .005 us; Config: SINGLE; Maximum Operating Temperature: 200 Cel; Maximum Non Repetitive Peak Forward Current: 1 A;

Details

RK73H2ATTD10R0F

Koa Speer Electronics

RK73H2ATTD10R0F by Koa Speer Electronics is a 0805 SMT fixed resistor with 10 ohm resistance, 1% tolerance, and 0.25 W power dissipation. Ideal for surface mount applications in automotive electronics due to its AEC-Q200 reference standard and operating voltage of 150 V.

Details

OPA2227UA

Burr-Brown Corporation

OPERATIONAL AMPLIFIER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;

Details

BAV99

Philips Components

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

LM555CM

Texas Instruments

LM555CM by Texas Instruments is an Analog Waveform Generation IC with a supply voltage range of 4.5V to 16V and max operating temperature of 70°C. It comes in a small outline package, suitable for applications requiring pulse generation or rectangular waveform outputs. With surface mount capability and low supply current of 15mA, it is ideal for commercial-grade electronic circuits.

Details

CRCW04020000Z0EDHP

Vishay Intertechnology

Vishay Intertechnology's CRCW04020000Z0EDHP is a 0402 SMT resistor with 0 ohm resistance, rated for temperatures from -55°C to 155°C. Ideal for jumper applications in automotive electronics due to AEC-Q200 compliance and compact size of 1mm x 0.5mm x 0.3mm.

Details

ST3485EBDR

STMicroelectronics

ST3485EBDR by STMicroelectronics is a Line Driver & Receiver with 3.3V power supply, EIA-422/EIA-485 interface standard, and 30ns max transmit delay. It is ideal for industrial applications requiring differential output and operates in temperatures ranging from -40 to 85°C.

Details

SMBJ18CA

Good-ark Electronics

TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Maximum Repetitive Peak Reverse Voltage: 18 V; Nominal Breakdown Voltage: 21.05 V; Maximum Time At Peak Reflow Temperature (s): 10; JESD-609 Code: e3;

Details

2N7002

Weitron Technology

N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Terminal Finish: TIN LEAD; Maximum Operating Temperature: 150 Cel;

Details

STM32F407VGT6

STMicroelectronics

STM32F407VGT6 by STMicroelectronics is a 32-bit microcontroller with 2/3.3V power supplies, 196608 bytes RAM, and 16-Ch 12-Bit ADC channels. It is ideal for industrial applications requiring CAN, ETHERNET, I2C(3), SPI(3), UART(2), USB(2) connectivity and features DMA(16) for efficient data transfer. With a max clock frequency of 50 MHz and operating temperature range of -40 to 85 °C, it offers high performance in a compact package style (14mm x 14mm).

Details

2N2222A

Fairchild Semiconductor

NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;

Details

BSS138LT1G

Onsemi

BSS138LT1G by Onsemi is a N-CHANNEL FET with 50V DS Breakdown Voltage, 0.2A Drain Current, and 3.5 ohm On Resistance. Ideal for SWITCHING applications due to its ENHANCEMENT MODE operation and built-in DIODE. Operates b/w -55 to 150 °C with small outline package style for surface mount assembly.

Details

BAV99

Zetex Plc

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

87832-1420

Molex

87832-1420 by Molex is a 14-contact board connector with 0.079" pitch, suitable for commercial applications. It features matte tin over nickel finish, glass-filled polyamide insulator, and polarization key for easy assembly. Withstanding voltage of 1400VAC and operating temperature range from -55 to 105°C make it reliable for various electronic devices.

Details

2N2222A

Vpt Components

NPN; Configuration: SINGLE; Surface Mount: NO; Maximum Power Dissipation (Abs): 1 W; Maximum Collector Current (IC): .8 A; Maximum Power Dissipation Ambient: .5 W;

Details

LL4148

Taitron Components

RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;

Details

SMBJ18CA

Lite-on Semiconductor

TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

BSS123,215

Nexperia

N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Moisture Sensitivity Level (MSL): 1; No. of Terminals: 3; Maximum Time At Peak Reflow Temperature (s): 30;

Details

2N7002

Kec

N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR; Transistor Application: SWITCHING; Package Body Material: PLASTIC/EPOXY;

Details

SMBJ18CA

Hy Electronic

TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

AH3363Q-SA-7 Technical Details

TYPE	DESCRIPTION
Minimum Supply Voltage:	3 V
Minimum Range Of Magnetic Field:	2 mT
Maximum Operating Current:	4 mA
Output Type:	CURRENT OUTPUT
Terminal Finish:	MATTE TIN
No. of Terminals:	3
Termination Type:	SOLDER
Screening Level:	AEC-Q100
Input Mode:	UNIPOLAR
Maximum Operating Temperature:	150 Cel
Hysteresis:	2 mT
Other Names:	AH3363Q-SA-7DICT AH3363Q-SA-7DITR AH3363Q-SA-7DIDKR
Maximum Supply Voltage:	28 V
Housing:	PLASTIC
Output Circuit Type:	OPEN-DRAIN
JESD-609 Code:	e3
Minimum Operating Temperature:	-40 Cel
Mounting Feature:	SURFACE MOUNT
Body Width:	1.3 inch
Sensors or Transducers Type:	MAGNETIC FIELD SENSOR,HALL EFFECT
Package Equivalence Code:	TO-236
Maximum Magnetic Field Range:	7.2 mT
Package Shape or Style:	RECTANGULAR
Output (V):	OPEN-DRAIN
Body Height:	1 mm
Body Length/Diameter:	2.9 mm

Category Top Products

HMC1001-RC

Honeywell Sensing And Control

Honeywell Sensing And Control's HMC1001-RC is a magnetic field sensor with 8 terminals, operating b/w -40 to 85°C. It has a supply voltage range of 2-12V and can detect magnetic fields from -0.2 to 0.2 mT. Ideal for applications requiring precise magnetoresistive sensing in a compact rectangular package.

MLX90251EVA-FAA-200-BU

Melexis N V

MLX90251EVA-FAA-200-BU by Melexis N V is a magnetic field sensor with 4.5V to 5.5V supply voltage range, -40°C to 85°C operating temperature, and 1.25A max output current. It is used for Hall effect sensing in various applications requiring precise analog voltage output.

A1212LLHLX-T

Allegro MicroSystems

Allegro MicroSystems' A1212LLHLX-T is a magnetic field sensor with 24V max supply, 22.5mT hysteresis, and -40 to 150°C operating temp range. Ideal for voltage output applications requiring precise magnetic field detection in compact spaces.

TLE4997A8DXUMA1

Infineon Technologies

TLE4997A8DXUMA1 by Infineon is a magnetic field sensor with 4.5-5.5V supply voltage range, -40 to 125°C operating temperature, and -50 to 200mT magnetic field range. It outputs digital current in the range of -1.0-1.0mA and can handle up to 10mA current output, making it ideal for applications requiring precise magnetic field measurements in compact spaces like automotive sensors or industrial automation systems.

APS12200LUAA

Allegro MicroSystems

MAGNETIC FIELD SENSOR,HALL EFFECT;

A1323ELHLT-T

Allegro MicroSystems

Allegro MicroSystems A1323ELHLT-T is a magnetic field sensor with 5V supply, 1.5% linearity, and 2.5 mV/G sensitivity. Ideal for applications requiring digital voltage output in temperature range of -40 to 85°C. Package: PLASTIC/EPOXY, Style: RECTANGULAR, Mounting: SURFACE MOUNT.

OHN3020U

Optek Technology

MAGNETIC FIELD SENSOR,HALL EFFECT; Mounting Feature: THROUGH HOLE MOUNT; No. of Terminals: 3; Output Type: ANALOG CURRENT; Package Shape or Style: RECTANGULAR; Output Range: 25mA;

SS494B-T2

Honeywell Sensing And Control

SS494B-T2 by Honeywell is a magnetic field sensor with 3 terminals, operating voltage of 4.5-10.5V, and sensitivity of 5mV/G. It features a transistor output circuit type and can detect magnetic fields ranging from -42mT to 42mT. Ideal for applications requiring precise analog current output in temperature environments from -40°C to 150°C.

AH3377-P-B

Diodes Incorporated

Diodes Inc. AH3377-P-B is a Hall Effect magnetic field sensor with 3-28V supply, 2.5mT hysteresis, and 30-55mA current output. Ideal for applications requiring -40 to 125°C operation, sensing magnetic fields from 7-14mT in through-hole mounting setups.

ACS770ECB-400B-PFF-T

Allegro MicroSystems

MAGNETIC FIELD SENSOR,HALL EFFECT;

SS49

Honeywell Sensing And Control

SS49 by Honeywell is a magnetic field sensor with single-ended output, operating at -40 to 100°C. It offers sensitivity of 1.25 mV/G and output range of 1.75-2.25V, suitable for applications requiring precise analog voltage measurements in a compact rectangular package with through-hole mounting.

DRV5032AJDBZR

Texas Instruments

DRV5032AJDBZR by Texas Instruments is a magnetic field sensor with hysteresis of 1.5 mT, operating temperature range of -40 to 85°C, and output current up to 5A. Ideal for applications requiring precise digital current output in a compact rectangular package for surface mount installations.

A1326LUALC-T

Allegro MicroSystems

MAGNETIC FIELD SENSOR,HALL EFFECT;

AH1883-ZG-7

Diodes Incorporated

AH1883-ZG-7 by Diodes Inc. is a magnetic field sensor with a supply voltage range of 1.65V to 3.3V and an operating temperature range of -40°C to 85°C. It has a non-inverting analog voltage output type and can detect magnetic fields ranging from 0.6mT to 5.5mT, making it suitable for various applications such as position sensing and proximity detection in automotive and industrial systems.

DRV5013BCELPE

Texas Instruments

DRV5013BCELPE by Texas Instruments is a magnetic field sensor with 38V max supply voltage, 24mT hysteresis, and 0-30mA output range. Ideal for applications requiring digital current output in environments ranging from -40 to 125°C.

A1318LLHLX-2-T

Allegro MicroSystems

Allegro MicroSystems' A1318LLHLX-2-T is a magnetic field sensor with 3.3V power supply, 2.388 mV/G sensitivity, and single-ended output circuit type. Ideal for applications requiring precise analog voltage output in a compact rectangular package, suitable for surface mounting with matte tin terminal finish.

A1150LUA-T

Allegro MicroSystems

Allegro MicroSystems' A1150LUA-T is a magnetic field sensor with 3mT hysteresis, operating voltage range of 3-24V, and BICMOS technology. Ideal for applications requiring precise analog current output in temperature ranges from -40 to 150°C. Suitable for through-hole mounting with a rectangular package shape and matte tin finish terminals.

LTS25-NP

Lem International Sa

LTS25-NP by Lem International Sa is a magnetic field sensor with Hall effect technology. It operates b/w -40°C to 85°C, with supply voltage range of 4.75V to 5.25V. This rectangular sensor outputs analog voltage and is suitable for through hole mounting applications.

LA150-P

Lem International Sa

LA150-P by Lem International Sa is a magnetic field sensor with a max supply voltage of 15.75V and operating temperature range from -40°C to 85°C. Measuring 16" in width, it features a Hall effect transducer type for precise sensing applications in various industries. With a plastic housing and solder termination, this rectangular sensor is ideal for through-hole mounting setups.

MLX90290LUA-AAA-500-BU

Melexis N V

MAGNETIC FIELD SENSOR,HALL EFFECT; JESD-609 Code: e3; Terminal Finish: MATTE TIN;