Image shown is a representation only. Exact specifications should be obtained from the product data sheet.

VF360NT

Manufacturer

Honeywell Sensing And Control
Manufacturer's Part Number

VF360NT
Description

MAGNETIC FIELD SENSOR,HALL EFFECT; Mounting Feature: SURFACE MOUNT; Output Type: DIGITAL CURRENT; Package Shape or Style: RECTANGULAR; Maximum Output Current: 20 A; Maximum Operating Temperature: 150 Cel;
Datasheet

Datasheet

Not In Stock

Popular Products

LAN8720A-CP-TR

Microchip Technology

LAN8720A-CP-TR by Microchip: Ethernet transceiver with 100 Mbps data rate, operates at 3.3V, and consumes 54mA max supply current. Ideal for network interfaces in commercial applications due to its small size (4x4mm) and low power consumption.

Details

SMBJ18CA

Secos

TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

SMBJ18CA

Forward International Electronics

TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Nominal Breakdown Voltage: 21.05 V; Maximum Clamping Voltage: 29.2 V; Maximum Repetitive Peak Reverse Voltage: 18 V; Polarity: BIDIRECTIONAL;

Details

1N4148

Toshiba

RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;

Details

LL4148

Changzhou Starsea Electronics

RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;

Details

2N2222A

Gec Plessey Semiconductors

NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;

Details

ABS10-32.768KHZ-T

Abracon

Abracon's ABS10-32.768KHZ-T crystal oscillator offers 20 ppm frequency tolerance, 122% stability, and 70000 ohm series resistance. Ideal for applications requiring precise timing at 0.032768 MHz, such as IoT devices and wearables due to its compact size and low power consumption.

Details

KSZ9031RNXIC

Microchip Technology

KSZ9031RNXIC by Microchip Technology is a network interface chip with 1 transceiver. It operates at a data rate of 1000 Mbps and has a nominal voltage of 1.2V. This chip is commonly used in industrial applications requiring Ethernet connectivity.

Details

LM2675M-ADJ/NOPB

National Semiconductor

SWITCHING REGULATOR; Temperature Grade: AUTOMOTIVE; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;

Details

BAV99

Comchip Technology

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

BSS138

Siemens

N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Maximum Drain-Source On Resistance: 3.5 ohm; Terminal Finish: Tin/Lead (Sn/Pb);

Details

BAV99

Fairchild Semiconductor

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

1N4148WS

Panjit International

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

LM555CN

Rca Solid State

Analog Waveform Generation Functions; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO;

Details

2N2222A

International Devices

NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;

Details

SMBJ18CA

Fagor Electronica S Coop

TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

C0603X104K5RACAUTO

KEMET Corporation

C0603X104K5RACAUTO by KEMET Corp is a ceramic capacitor with capacitance of 0.1 uF and rated DC voltage of 50 V. It has a temperature coefficient of 15% and can operate b/w -55 to 125 °C. This SMT package is commonly used in automotive applications due to its AEC-Q200 reference standard.

Details

SMBJ18CA

Weitron Technology

TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

1N4148

Vishay Telefunken

RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;

Details

CC0603KRX7R9BB103

Yageo

Yageo CC0603KRX7R9BB103 is a 0603 SMT ceramic capacitor with capacitance of 0.01uF and rated DC voltage of 50V. It has X7R temperature characteristics, -55 to 125°C operating range, and ±10% tolerance. Ideal for surface mount applications in electronics requiring stable capacitance across temperatures.

Details

VF360NT Technical Details

TYPE	DESCRIPTION
Minimum Supply Voltage:	3 V
Minimum Range Of Magnetic Field:	-4.5 mT
Other Names:	480-6515-2 480-6515-1 2266-VF360NT 480-6515-6
Maximum Operating Current:	8 mA
Maximum Supply Voltage:	24 V
Output Type:	DIGITAL CURRENT
Maximum Output Current:	20 A
Minimum Operating Temperature:	-40 Cel
Mounting Feature:	SURFACE MOUNT
Body Width:	1.6 inch
Sensors or Transducers Type:	MAGNETIC FIELD SENSOR,HALL EFFECT
Maximum Magnetic Field Range:	4.5 mT
Package Shape or Style:	RECTANGULAR
Termination Type:	SOLDER
Body Height:	1.28 mm
Additional Features:	IT ALSO OPERATES AT 3 TO 12 V AT 150 DEGREE CENTIGRADE, REVERSE POLARITY PROTECTION
Body Length/Diameter:	2.9 mm
Maximum Operating Temperature:	150 Cel

Category Top Products

HMC1002-RC

Honeywell Sensing And Control

Honeywell Sensing And Control's HMC1002-RC is a magnetic field sensor with 2 axes, operating b/w -40 to 85°C. It has a supply voltage range of 2-12V and can detect magnetic fields from -0.2mT to 0.2mT. This rectangular surface mount sensor is ideal for applications requiring precise magnetoresistive sensing in various industries.

DRV5056Z4QDBZT

Texas Instruments

Texas Instruments' DRV5056Z4QDBZT is a magnetic field sensor with 3 terminals, operating from -40 to 125°C. It has a supply voltage range of 3-5.5V and output current up to 1A, suitable for Hall effect applications in various industries. The sensor outputs an analog current within the -1-1mA range, featuring a unipolar input mode and surface mounting feature.

DRV5013BCQDBZR

Texas Instruments

DRV5013BCQDBZR by Texas Instruments is a magnetic field sensor with hysteresis of 24 mT, output range of 0-38V, and max supply voltage of 38V. It is used for detecting magnetic fields in applications such as automotive systems, industrial controls, and consumer electronics.

MP102103

The Cherry

The Cherry MP102103 is a Hall effect magnetic field sensor with 4.5-24V supply voltage range, 500mV digital output, and -40 to 85°C operating temperature. Ideal for applications requiring precise detection of magnetic fields in a compact rectangular package measuring 9.53" x 28.58mm x 14.27mm, featuring solder termination and panel mounting capabilities.

TMAG5170A2QDGKR

Texas Instruments

TMAG5170A2QDGKR by Texas Instruments is a magnetic field sensor with voltage output. It operates b/w -40 to 150°C, with supply voltage range of 2.3-5.5V and output range of 0.4-4.6V. Ideal for applications requiring precise magnetic field measurements in compact spaces like automotive sensors or industrial automation systems.

MMC33160MT

Memsic

MMC33160MT by Memsic is a magnetic field sensor with 1.62V to 3.6V supply voltage range and -40°C to 85°C operating temperature. It features a digital voltage output interface, magnetoresistive sensors type, and square package style. Ideal for surface mount applications in various industries requiring precise magnetic field measurements.

SNDH-T4C-G01

Honeywell Sensing And Control

SNDH-T4C-G01 by Honeywell is a Hall effect magnetic field sensor with 4.5-18V supply voltage range, -40 to 150°C operating temperature, and 20A output current. It features a cylindrical shape, open-collector digital output, and flange mount for industrial applications requiring precise magnetic field detection.

SS59ET

Honeywell Sensing And Control

SS59ET by Honeywell is a magnetic field sensor with 6.5V max supply voltage, -40 to 100°C operating temp range, and 1-1.75V analog current output. Ideal for applications requiring precise sensing of magnetic fields in a compact rectangular package.

HMC1021S-TR

Honeywell

MAGNETIC FIELD SENSOR,MAGNETORESISTIVE; Mounting Feature: SURFACE MOUNT; No. of Terminals: 8; Package Shape or Style: RECTANGULAR; No. of Axes: 1; Maximum Magnetic Field Range: .6 mT;

MLX92231LUA-AAA-034-BU

Melexis N V

MLX92231LUA-AAA-034-BU by Melexis N V is a magnetic field sensor with 3 terminals, CMOS technology, and current output. It operates b/w -40 to 150 °C with a supply voltage range of 2.7V to 24V. Ideal for applications requiring precise measurement of magnetic fields in the range of 3.8mT to 5mT.

TCS40DLR,LF

Toshiba

Toshiba's TCS40DLR,LF is a magnetic field sensor with 1.4mT hysteresis and 0-5.5V digital output range. Ideal for applications requiring precise magnetic field detection in a compact form factor, such as IoT devices or automotive sensors. Operating temperature ranges from -40 to 85°C, making it versatile for various environments.

ACS70311LKTATN-010B5-C

Allegro MicroSystems

Allegro MicroSystems' ACS70311LKTATN-010B5-C is a magnetic field sensor with 4 terminals, operating voltage range of 4.5V to 5.5V, and sensitivity of 10 mV/G. It outputs analog voltage in the range of 0.50-4.50V, suitable for automotive applications due to AEC-Q100 screening and BICMOS technology, with an operating temperature range from -40°C to 150°C.

SS461A-T2

Honeywell Sensing And Control

SS461A-T2 by Honeywell is a magnetic field sensor with 3.8-30V power supply, -40 to 150°C operating temp, and 5-8.5mT magnetic field range. It has a rectangular plastic package and through-hole mounting feature, suitable for applications requiring digital current output in industrial environments.

TLE493DW2B6A3HTSA1

Infineon Technologies

TLE493DW2B6A3HTSA1 by Infineon is a magnetic field sensor with 2.8-3.5V supply voltage range, -40 to 125°C operating temperature, and 160-230mT magnetic field range. It features digital voltage output via I2C interface, ideal for surface mount applications in various industries like automotive and consumer electronics.

A1326LUALC-T

Allegro MicroSystems

MAGNETIC FIELD SENSOR,HALL EFFECT;

ALS31313KLEATR-500

Allegro MicroSystems

ALS31313KLEATR-500 by Allegro MicroSystems is a 3-axis magnetic field sensor with a supply voltage range of 2.65V to 3.5V and operates b/w -40°C to 125°C. It features an open-drain digital voltage output interface, suitable for automotive applications due to its AEC-Q100 screening level and surface mounting feature.

TLE4966-3K

Infineon Technologies

TLE4966-3K by Infineon is a magnetic field sensor with 2.7-18V supply range, 5mT hysteresis, and 0-10mA digital current output. Ideal for applications requiring precise magnetic field detection in compact spaces like automotive sensors and industrial automation systems.

MLX92231LSE-AAA-010-RE

Melexis N V

Melexis N V's MLX92231LSE-AAA-010-RE is a magnetic field sensor with 3-wire interface, operating from -40 to 150°C. It offers a current output range of 25-70mA and can detect magnetic fields ranging from 6.8 to 11.8 mT. Ideal for surface mount applications requiring precise unipolar sensing capabilities.

APS12200LLHALX

Allegro MicroSystems

APS12200LLHALX by Allegro MicroSystems is a magnetic field sensor with 24V max supply voltage, 4mT hysteresis, and -40 to 150°C operating temperature range. Ideal for current output applications, it features a 3-wire interface and surface mounting feature.

A1337LLETR-T

Allegro MicroSystems

MAGNETIC FIELD SENSOR,HALL EFFECT; JESD-609 Code: e3; Terminal Finish: MATTE TIN; Operating Frequency: 10000 Hz;