Image shown is a representation only. Exact specifications should be obtained from the product data sheet.

ABM7-8.000MHZ-D-2-Y-T

Manufacturer

Abracon
Manufacturer's Part Number

ABM7-8.000MHZ-D-2-Y-T
Description

PARALLEL - FUNDAMENTAL; Mounting Feature: SURFACE MOUNT; Frequency Tolerance: 20 ppm; Aging: 5 PPM/FIRST YEAR; Additional Features: AT CUT; TAPE AND REEL; Physical Dimension: L6.0XB3.5XH1.4 (mm)/L0.236XB0.138XH0.055 (inch);
Datasheet

Datasheet

Not In Stock

Popular Products

1N4148

Laube Technology

RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;

Details

SMBJ18CA

Transpro Electronics

TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; JESD-609 Code: e0; Terminal Finish: Tin/Lead (Sn/Pb); Nominal Breakdown Voltage: 21.1 V; Maximum Clamping Voltage: 29.2 V;

Details

IRLML6402TRPBF

International Rectifier

P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 1.3 W; Peak Reflow Temperature (C): 260; Package Style (Meter): SMALL OUTLINE;

Details

SN65HVD230DR

Texas Instruments

SN65HVD230DR by Texas Instruments is a BICMOS technology interface circuit with 1Mbps data rate, suitable for industrial applications. It operates at 3.3V, has 8 terminals in a small outline package, and can withstand temperatures from -40 to 85°C.

Details

LM2675M-ADJ/NOPB

National Semiconductor

SWITCHING REGULATOR; Temperature Grade: AUTOMOTIVE; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;

Details

2N2222A

Shanghai Lunsure Electronic Technology

NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; JESD-30 Code: O-MBCY-W3;

Details

M39029/56-351

Carlisle Interconnect Technologies

CONNECTOR ACCESSORY; MIL Conformity: YES; Contact Type: CRIMP; Removal Tools: M81969/8-06, M81969/14-02; IEC Conformity: NO; Contact Gender: FEMALE;

Details

BSS138LT3G

Onsemi

BSS138LT3G by Onsemi is a N-CHANNEL FET with a min DS breakdown voltage of 50V. It is used for switching applications and has a max drain current of 0.2A and max drain-source on resistance of 3.5 ohm.

Details

BAV99

Philips Semiconductors

RECTIFIER DIODE; Surface Mount: YES; Maximum Output Current: .1 A; Peak Reflow Temperature (C): 260; Terminal Finish: MATTE TIN; Maximum Reverse Recovery Time: .006 us;

Details

1N4148WS

Good-ark Electronics

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

2N7002

Taitron Components

N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Operating Mode: ENHANCEMENT MODE; Minimum DS Breakdown Voltage: 60 V; Package Shape: RECTANGULAR;

Details

2N7002

Teledyne Components

N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; JESD-30 Code: R-PDSO-G3; Maximum Operating Temperature: 150 Cel; No. of Terminals: 3;

Details

LM107H/883

Linear Technology

OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Technology: BIPOLAR;

Details

BAV99

Bytesonic Electronics

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

M24308/2-1F

Amphenol

D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Body or Shell Style: RECEPTACLE; Body Length: 1.228 inch; No. of Rows Loaded: 2;

Details

NDT2955

National Semiconductor

P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 3 W; JESD-609 Code: e0; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR;

Details

BAV99

Eic Semiconductor

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

LL4148GS08

Temic Semiconductors

LL4148GS08 by Temic Semiconductors is a glass diode with a max reverse recovery time of 0.008 us and max forward voltage of 1 V. It is a rectifier diode with a max output current of 0.15 A, ideal for applications requiring fast switching speeds and low power dissipation in electronic circuits.

Details

BAV99

Diotec Semiconductor Ag

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

RC0603FR-0710KL

Yageo

Yageo's RC0603FR-0710KL is a fixed resistor with 10000 ohm resistance, 1% tolerance, and 0.1 W power dissipation. It operates b/w -55 to 155 °C and is ideal for surface mount applications in electronics requiring precise resistance values.

Details

ABM7-8.000MHZ-D-2-Y-T Technical Details

TYPE	DESCRIPTION
Load Capacitance:	18 pF
Frequency Tolerance:	20 ppm
Frequency Stability:	30 %
Series Resistance:	100 ohm
Terminal Finish:	GOLD
JESD-609 Code:	e4
Minimum Operating Temperature:	-40 Cel
Mounting Feature:	SURFACE MOUNT
Drive Level:	10 uW
Nominal Operating Frequency:	8 MHz
Aging:	5 PPM/FIRST YEAR
Physical Dimension:	L6.0XB3.5XH1.4 (mm)/L0.236XB0.138XH0.055 (inch)
Crystal or Resonator Type:	PARALLEL - FUNDAMENTAL
Additional Features:	AT CUT; TAPE AND REEL
Maximum Operating Temperature:	85 Cel

Category Top Products

ABLS2-20.000MHZ-D4Y-T

Abracon

ABLS2-20.000MHZ-D4Y-T by Abracon is a 20 MHz crystal oscillator with 30 ppm frequency tolerance and 30% stability. Ideal for applications requiring precise timing, it operates b/w -40 to 85 °C and features a compact surface mount design.

ABLS-8.000MHZ-B-4-Y-T

Abracon

ABLS-8.000MHZ-B-4-Y-T by Abracon is a 8 MHz crystal oscillator with 30 ppm frequency tolerance and 30% stability. Ideal for applications requiring precise timing, it operates b/w -20 to 70 °C, featuring parallel-fundamental type and surface mounting.

ABLS7M2-12.000MHZ-D2Y-T

Abracon

ABLS7M2-12.000MHZ-D2Y-T by Abracon is a 12 MHz crystal oscillator with 20 ppm frequency tolerance and 30% stability. Ideal for applications requiring precise timing in temperature range of -40 to 85 °C, such as telecommunications equipment and industrial automation systems.

ST3215SB32768H5HPWAA

Kyocera

Kyocera ST3215SB32768H5HPWAA crystal oscillator offers 20 ppm frequency tolerance, 200% stability, and 70000 ohm series resistance. Ideal for applications requiring 0.032768 MHz frequency with -40 to 85 °C operating temperature range. Suitable for surface mount setups needing precise timing control.

AB38T-32.768KHZ

Abracon

AB38T-32.768KHZ by Abracon is a 32.768 kHz crystal oscillator with 20 ppm frequency tolerance and 30000 ohm series resistance. Ideal for applications requiring precise timekeeping, such as real-time clocks in electronic devices. Operating temperature range from -10 to 60 °C with TIN OVER NICKEL terminal finish.

NX1612SA-50M-EXS00A-CS08403

Nihon Dempa Kogyo

NX1612SA-50M-EXS00A-CS08403 by Nihon Dempa Kogyo is a crystal oscillator with 10 ppm frequency tolerance, 15% stability, and 80 ohm series resistance. Ideal for applications requiring a parallel-fundamental type resonator at 50 MHz, operating b/w -30 to 85 °C with an aging rate of 3 PPM/yr.

ABM3B-12.288MHZ-B-2-T

Abracon

ABM3B-12.288MHZ-B-2-T by Abracon is a 12.288 MHz crystal oscillator with 20 ppm frequency tolerance and 50% stability. Ideal for applications requiring precise timing, such as telecommunications equipment or industrial automation systems.

ABLS-12.000MHZ-20-B-3-H-T

Abracon

ABLS-12.000MHZ-20-B-3-H-T by Abracon is a 12MHz crystal oscillator with 25 ppm frequency tolerance and 35% stability. Ideal for applications requiring precise timing, it operates b/w -20°C to 70°C, featuring a parallel fundamental crystal type and matte tin finish for surface mount installation.

ATS080-E

Cts

Cts ATS080-E crystal oscillator offers 8 MHz nominal frequency with 30 ppm tolerance and 50% stability. Ideal for applications requiring precise timing in a temperature range of -40 to 85°C, featuring through-hole mounting and low aging rate of 5 PPM/year.

TSX-322524.0000MF15X-AC3

Seiko Epson

The Seiko Epson TSX-322524.0000MF15X-AC3 is a crystal oscillator with a frequency tolerance of 10 ppm and series resistance of 40 ohm. It is commonly used in applications requiring a nominal operating frequency of 24 MHz, such as surface mount devices.

9C-8.000MEEJ-T

Txc

The Txc 9C-8.000MEEJ-T crystal oscillator offers a frequency tolerance of 10 ppm and stability of 10%. With a series resistance of 80 ohm, it operates at 8 MHz ideal for applications requiring precise timing in temperature range -20 to 70 °C.

R1210-48.000-8-F-1015-EXT-TR

Raltron Electronics

Raltron Electronics' R1210-48.000-8-F-1015-EXT-TR crystal oscillator offers 10 ppm frequency tolerance, 20% stability, and 100 ohm series resistance. Ideal for applications requiring a 48 MHz nominal operating frequency, such as IoT devices and wireless communication systems.

FC-12M32.7680KD-A0

Seiko Epson

FC-12M32.7680KD-A0 by Seiko Epson is a crystal oscillator with 30 ppm frequency tolerance, 144% stability, and 90000 ohm series resistance. Ideal for applications requiring precise timing at frequencies of 0.032768 MHz, such as in telecommunications equipment or industrial automation systems. Operating temperature ranges from -40 to 85 °C with GOLD terminal finish and PARALLEL - FUNDAMENTAL crystal type.

ABM8-32.000MHZ-9-B1U-T

Abracon

ABM8-32.000MHZ-9-B1U-T by Abracon is a 32 MHz crystal oscillator with 10 ppm frequency tolerance and 10% stability. Ideal for applications requiring precise timing, it operates b/w -20°C to 70°C, featuring a compact surface mount design at 3.2mm x 2.5mm x 0.8mm in size.

FC-135R32.7680KA-A0

Seiko Epson

Seiko Epson's FC-135R32.7680KA-A0 crystal oscillator offers 20 ppm frequency tolerance, 144% stability, and 50000 ohm series resistance. Ideal for applications requiring precise timing at a frequency of 0.032768 MHz, such as in telecommunications equipment or industrial automation systems.

NX3225GA-12.000M-STD-CRG-2

Nihon Dempa Kogyo

NX3225GA-12.000M-STD-CRG-2 by Nihon Dempa Kogyo is a 12 MHz crystal oscillator with 20 ppm frequency tolerance and 30% stability. Ideal for applications requiring precise timing, it operates b/w -40 to 85 °C, with a series resistance of 200 ohm and load capacitance of 8 pF.

445I32J25M00000

Cts

Cts 445I32J25M00000 crystal oscillator offers 30 ppm frequency tolerance, 20% stability, and 40 ohm series resistance. Ideal for applications requiring a parallel-fundamental resonator with a nominal frequency of 25 MHz. Operating range from -40 to 85 °C, suitable for surface mount installations.

ECS-250-18-33B-CKY-TR3

Ecs International

Quartz Crystals;

HC49S-4.9152-30-50-70-30-ATF

Multicomp Pro

HC49S-4.9152-30-50-70-30-ATF by Multicomp Pro is a crystal oscillator with 4.9152 MHz frequency, 30 ppm tolerance, and 50% stability. Ideal for applications requiring precise timing such as telecommunications equipment due to its high accuracy and low aging rate of 5 PPM/YEAR.

MC-40532.7680K-A0

Epson Toyocom

PARALLEL - FUNDAMENTAL; Mounting Feature: SURFACE MOUNT; Frequency Tolerance: 20 ppm; Aging: 3 PPM/FIRST YEAR; Additional Features: TAPE AND REEL; Physical Dimension: L9.6XB4.06XH3.6 (mm)/L0.378XB0.16XH0.142 (inch);