Image shown is a representation only. Exact specifications should be obtained from the product data sheet.

NX3225GB-20.000M-STD-CRA-2

Manufacturer

Nihon Dempa Kogyo
Manufacturer's Part Number

NX3225GB-20.000M-STD-CRA-2
Description

PARALLEL - FUNDAMENTAL; Mounting Feature: SURFACE MOUNT; Frequency Tolerance: 50 ppm; Nominal Operating Frequency: 20 MHz; Frequency Stability: 150 %; Drive Level: 10 uW;
Datasheet

Datasheet

Not In Stock

Popular Products

2N2222A

Semitronics

NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;

Details

LL4148

Rugao Dachang Electronic

RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;

Details

ERJU06F10R0V

Panasonic

ERJU06F10R0V by Panasonic is an 0805 size SMT fixed resistor with a resistance of 10 ohm and 1% tolerance. It operates b/w -55 to 155 °C, suitable for AEC-Q200 standards in automotive applications due to its high temperature coefficient of 100 ppm/°C. With a max operating voltage of 150 V and power dissipation of 0.125 W, it is ideal for surface mounting type.

Details

SZNUP2105LT1G

Onsemi

SZNUP2105LT1G by Onsemi is a Transient Suppression Device with 2 elements in a common anode configuration. It has a max non-repetitive peak reverse power dissipation of 350W and breakdown voltage of 29.1V. Ideal for applications requiring bidirectional polarity protection, such as automotive electronics and industrial equipment due to its AEC-Q101 compliance and high clamping voltage of 44V.

Details

U.FL-R-SMT-1(10)

Hirose Electric

U.FL-R-SMT-1(10) by Hirose Electric is a RF connector with 50 ohm impedance, 0.05 dB insertion loss, and 8 GHz operating frequency. Ideal for board mounting in commercial applications, it features gold termination finish, liquid crystal polymer insulator, and 200VAC dielectric voltage resistance.

Details

LM107H/883

Rochester Electronics

OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Maximum Average Bias Current (IIB): .1 uA;

Details

BSS138LT3G

Onsemi

BSS138LT3G by Onsemi is a N-CHANNEL FET with a min DS breakdown voltage of 50V. It is used for switching applications and has a max drain current of 0.2A and max drain-source on resistance of 3.5 ohm.

Details

C1210C104K5RACTU

KEMET Corporation

KEMET C1210C104K5RACTU is a ceramic capacitor with 0.1uF capacitance, rated for 50V. It has X7R temperature characteristics and ±10% tolerance, suitable for surface mount applications in a wide temperature range from -55°C to 125°C. Its compact rectangular package makes it ideal for various electronic devices.

Details

1N4148WS

Synsemi

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

FDV304P

Fairchild Semiconductor

P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Moisture Sensitivity Level (MSL): 1; Maximum Drain Current (ID): .46 A;

Details

2N7002

NXP Semiconductors

N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .83 W; JESD-609 Code: e3; Minimum DS Breakdown Voltage: 60 V;

Details

BAV99

Vishay Intertechnology

Vishay Intertechnology's BAV99 diode features a max forward voltage of 1.3V and a max output current of 0.15A, making it ideal for rectification applications. With a small outline package style and dual terminal position, this series-connected diode is designed for surface mount usage in various electronic circuits with an operating temperature range from -55°C to 150°C.

Details

EU2B-YS303C

Idec

ROTARY SWITCH;

Details

DS18B20Z+

Analog Devices

DS18B20Z+ by Analog Devices is a 12-bit temperature sensor with 1-Wire interface. It operates b/w -55 to 125°C, with ±0.5°C accuracy. Suitable for applications requiring digital output and surface mounting feature.

Details

FDC5614P

MSKSEMI SEMICONDUCTOR

P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 2 W; Transistor Element Material: SILICON; Minimum DS Breakdown Voltage: 60 V;

Details

LM358N

Intersil

OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;

Details

MMBF170LT1G

Onsemi

MMBF170LT1G by Onsemi is a N-CHANNEL FET with 60V DS Breakdown Voltage and 0.5A Drain Current. Ideal for SWITCHING applications, it operates in ENHANCEMENT MODE with a max power dissipation of 0.225W. This small outline transistor has a temperature range from -55 to 150 °C.

Details

E8WSDC12-32.768KTR

Abracon

Abracon's E8WSDC12-32.768KTR crystal oscillator offers 20 ppm frequency tolerance, 144% stability, and 70000 ohm series resistance. Ideal for applications requiring precise timing at 0.032768 MHz, such as IoT devices and communication systems.

Details

2N2222A

STMicroelectronics

NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .6 A;

Details

SN65HVD230DR

Texas Instruments

SN65HVD230DR by Texas Instruments is a BICMOS technology interface circuit with 1Mbps data rate, suitable for industrial applications. It operates at 3.3V, has 8 terminals in a small outline package, and can withstand temperatures from -40 to 85°C.

Details

NX3225GB-20.000M-STD-CRA-2 Technical Details

TYPE	DESCRIPTION
Load Capacitance:	8 pF
Frequency Tolerance:	50 ppm
Drive Level:	10 uW
Nominal Operating Frequency:	20 MHz
Frequency Stability:	150 %
Series Resistance:	120 ohm
Physical Dimension:	L3.2XB2.5XH0.75 (mm)/L0.126XB0.098XH0.03 (inch)
Crystal or Resonator Type:	PARALLEL - FUNDAMENTAL
Maximum Operating Temperature:	150 Cel
Minimum Operating Temperature:	-40 Cel
Mounting Feature:	SURFACE MOUNT

Category Top Products

TS192F23CET

Cts

TS192F23CET by Cts is a crystal oscillator with a frequency tolerance of 20 ppm and stability of 30%. It is commonly used in applications requiring a nominal operating frequency of 19.2 MHz, such as communication systems and electronic devices.

ABM8G-20.000MHZ-18-D-2-Y-T

Abracon

ABM8G-20.000MHZ-18-D-2-Y-T by Abracon is a 20 MHz crystal oscillator with 20 ppm frequency tolerance and 30% stability. Ideal for applications requiring precise timing in temperature-sensitive environments. Features include gold over nickel terminal finish, parallel fundamental type, and surface mounting feature.

ABS07AIG-32.768KHZ-7-1-T

Abracon

Abracon's ABS07AIG-32.768KHZ-7-1-T crystal oscillator offers 10 ppm frequency tolerance, 400% stability, and 80000 ohm series resistance. Ideal for applications requiring a 0.032768 MHz nominal operating frequency, such as IoT devices and precision timing circuits in industrial automation.

ATS-49-R11.0592MHZ

Mtronpti

ATS-49-R11.0592MHZ by Mtronpti is a crystal oscillator with 11.0592 MHz frequency, 30 ppm tolerance, and 50% stability. Ideal for applications requiring precise timing in temperature ranges from -10 to 70 °C, it features through-hole mounting and low aging rate of 5 PPM/year.

7B-25.000MAAJ-T

Txc

7B-25.000MAAJ-T by Txc is a crystal oscillator with 25 MHz frequency, 30 ppm tolerance, and 30% stability. Ideal for applications requiring precise timing in electronics due to its compact size (5.0mm x 3.2mm x 0.9mm) and surface mount feature, operating b/w -20°C to 70°C efficiently.

HC49SM-12-30-50-60-16-ATF

Multicomp Pro

HC49SM-12-30-50-60-16-ATF by Multicomp Pro is a crystal oscillator with 30 ppm frequency tolerance, 50% stability, and 50 ohm series resistance. Ideal for applications requiring a 12 MHz nominal operating frequency, such as telecommunications equipment or industrial automation systems.

MS1V-T1K32.768KHZ12.5PF20PPMTAQC

Micro Crystal Ag

MS1V-T1K32.768KHZ12.5PF20PPMTAQC by Micro Crystal Ag is a 32.768 kHz crystal oscillator with 20 ppm frequency tolerance and 12.5 pF load capacitance. Ideal for applications requiring precise timing, such as in automotive electronics or IoT devices due to its high stability and low aging rate of 3 PPM/first year.

ABM8W-37.4000MHZ-6-K2Z-T3

Abracon

ABM8W-37.4MHz crystal oscillator by Abracon offers 20 ppm frequency tolerance and 50% stability. Ideal for applications requiring precise timing at a nominal frequency of 37.4 MHz, with a low drive level of 10 uW and surface mounting feature.

ECS-320-10-37B-CKY-TR3

Ecs International

Quartz Crystals;

ABM13W-80.0000MHZ-8-N1Y-T5

Abracon

ABM13W-80.0000MHZ-8-N1Y-T5 by Abracon is a 80 MHz Crystal Oscillator with 10 ppm Frequency Tolerance, 30% Stability, and 25 ohm Series Resistance. Ideal for applications requiring precise timing in temperature range of -30 to 85 °C, such as telecommunications equipment and industrial automation systems.

FOXSDLF/250F-20-T1

Fox Electronics

FOXSDLF/250F-20-T1 by Fox Electronics is a 25 MHz crystal oscillator with 30 ppm frequency tolerance and 50% stability. Ideal for applications requiring precise timing, it operates b/w -20 to 70 °C, featuring a surface mount design and low aging rate of 3 PPM/YEAR.

R1612-25.000-9-F-1010-TR

Raltron Electronics

Raltron Electronics' R1612-25.000-9-F-1010-TR is a crystal oscillator with 10 ppm frequency tolerance and 10% stability, suitable for applications requiring precise timing. With a series resistance of 150 ohm, it operates at frequencies up to 25 MHz and features a parallel fundamental crystal type. Ideal for surface mount setups, this component has a compact size of 1.6mm x 1.25mm x 0.32mm and can withstand temperatures from -10°C to 60°C.

ABM3B-12.000MHZ-10-1-U-T

Abracon

ABM3B-12.000MHZ-10-1-U-T by Abracon is a crystal oscillator with 10 ppm frequency tolerance and 10% frequency stability. It has a series resistance of 70 ohm and is suitable for applications requiring a nominal operating frequency of 12 MHz, such as electronic devices and communication systems.

ABS07W-32.768KHZ-K-1-T

Abracon

Abracon's ABS07W-32.768KHZ-K-1-T crystal oscillator offers 10 ppm frequency tolerance, 400% stability, and 60000 ohm series resistance. Ideal for applications requiring precise timing at a frequency of 0.032768 MHz in a compact L3.2XB1.5XH0.9 mm surface mount package with -40 to 125 °C operating range.

FC-13532.7680KA-A5

Seiko Epson

FC-13532.7680KA-A5 by Seiko Epson is a crystal oscillator with 20 ppm frequency tolerance, 144% stability, and 70000 ohm series resistance. Ideal for applications requiring precise timing at 0.032768 MHz, such as in telecommunications equipment or industrial automation systems. Operating temperature ranges from -40 to 85 °C with GOLD OVER NICKEL terminal finish.

NX2016SA-25.000M-STD-CZS-1

Nihon Dempa Kogyo

Quartz Crystals;

RT3215-32.768-12.5-TR-NS19

Raltron Electronics

Raltron Electronics' RT3215-32.768-12.5-TR-NS19 is a crystal oscillator with 20 ppm frequency tolerance, 126% stability, and 70000 ohm series resistance. Ideal for applications requiring 0.032768 MHz frequency, such as IoT devices due to its compact size of 3.2mm x 1.5mm x 0.8mm and low drive level of 1 uW.

ECS-120-10-36Q-ES-TR

Ecs International

ECS-120-10-36Q-ES-TR by Ecs International is a crystal oscillator with 12 MHz frequency, 30 ppm tolerance, and 50% stability. Ideal for applications requiring precise timing in electronics due to its small size (2.5mm x 2.0mm x 0.5mm) and surface mount feature, operating b/w -40°C to 125°C temperature range.

NX3225SA-26.000000MHZ-G4

Nihon Dempa Kogyo

NX3225SA-26.000000MHZ-G4 by Nihon Dempa Kogyo is a 26 MHz crystal oscillator with 10 ppm frequency tolerance and 10% stability. Ideal for applications requiring precise timing in temperature range of -20 to 70 °C, featuring gold terminal finish and surface mounting feature.

MS3V-T1R32.768KHZ12.5PF+/-20PPMTAQCAU

Micro Crystal Ag

MS3V-T1R32.768KHZ12.5PF+/-20PPMTAQCAU by Micro Crystal Ag is a 0.032768 MHz crystal oscillator with 20 ppm frequency tolerance and 126% stability. Ideal for applications requiring precise timing in temperatures ranging from -40 to 85 °C, it features a parallel-fundamental type and gold terminal finish for surface mount installation.