Image shown is a representation only. Exact specifications should be obtained from the product data sheet.

Q13FC1350000311

Manufacturer

Seiko Epson
Manufacturer's Part Number

Q13FC1350000311
Description

PARALLEL - FUNDAMENTAL; Mounting Feature: SURFACE MOUNT; Frequency Tolerance: 20 ppm; Aging: 3 PPM/FIRST YEAR; Series Resistance: 55000 ohm; Maximum Operating Temperature: 85 Cel;
Datasheet

Datasheet

Not In Stock

Popular Products

LL4148

Sangdest Microelectronics (Nanjing)

RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;

Details

LL4148-GS08

Vishay Telefunken

RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;

Details

2N2222A

Electronic Transistors

NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;

Details

OPA2277UA/2K5E4

Texas Instruments

OPA2277UA/2K5E4 by Texas Instruments is a dual operational amplifier with low-offset and micropower features. It has a max input offset voltage of 100uV, nominal common mode reject ratio of 140dB, and min slew rate of 0.8V/us. Ideal for industrial applications requiring precise signal amplification in compact designs.

Details

ULN2803A

Rochester Electronics

NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; Additional Features: LOGIC LEVEL COMPATIBLE; Qualification: Not Qualified;

Details

ULN2803A

Texas Instruments

ULN2803A by Texas Instruments is a peripheral driver with 8 functions. It has a max supply voltage of 3V and can operate in temperatures ranging from -40 to 85°C. This IC is commonly used as a buffer or inverter based peripheral driver for various applications.

Details

LL4148

Lite-on Semiconductor

RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;

Details

SMBJ18CA

Continental Device India

TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

TCA6424ARGJR

Texas Instruments

TCA6424ARGJR by Texas Instruments is a CMOS parallel I/O port with 24 bits and 3 ports. It operates b/w -40 to 85°C, suitable for industrial applications. With a max clock frequency of 0.4 MHz, it offers low power consumption at only 0.03 mA supply current.

Details

2N7002

General Semiconductor

N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; JEDEC-95 Code: TO-236AB; Qualification: Not Qualified; Package Style (Meter): SMALL OUTLINE;

Details

LL4148

SPC TECHNOLOGY/ MULTICOMP

RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;

Details

BAV99

Panasonic

MIXER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

2N7002,215

NXP Semiconductors

2N7002,215 by NXP Semiconductors is a small signal N-CHANNEL FET with a min DS breakdown voltage of 60V and max drain current of 0.3A. It is used for switching applications in enhancement mode, operates b/w -65 to 150 °C, and has a max power dissipation of 0.2W.

Details

SMBJ18CA

Leshan Radio

TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

1N4148

NXP Semiconductors

RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;

Details

STM32F103C8T6

STMicroelectronics

STM32F103C8T6 by STMicroelectronics is a 32-bit microcontroller with 48 terminals, operating at up to 16 MHz. It features 10-Ch 12-Bit ADC channels and 7 DMA channels, suitable for industrial applications requiring low power consumption and high-speed connectivity via CAN, I2C(2), SPI(2), USART(3), USB.

Details

SMBJ18CA

Onsemi

TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

LM555CN

National Semiconductor

PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO;

Details

2N2222A

General Transistor

NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;

Details

BAT54C-7-F

Diodes Incorporated

BAT54C-7-F by Diodes Inc. is a Schottky rectifier diode with common cathode, 2 elements, and max forward voltage of 0.24V. Ideal for applications requiring fast reverse recovery time of 0.005 us, such as in small outline packages for surface mount technology at temperatures ranging from -65 to 150°C.

Details

Q13FC1350000311 Technical Details

TYPE	DESCRIPTION
Load Capacitance:	9 pF
Frequency Tolerance:	20 ppm
Frequency Stability:	144 %
Series Resistance:	55000 ohm
Minimum Operating Temperature:	-40 Cel
Mounting Feature:	SURFACE MOUNT
Drive Level:	.5 uW
Nominal Operating Frequency:	.032768 MHz
Aging:	3 PPM/FIRST YEAR
Physical Dimension:	L3.2XB1.5XH0.8 (mm)/L0.126XB0.059XH0.031 (inch)
Crystal or Resonator Type:	PARALLEL - FUNDAMENTAL
Additional Features:	TR, 7 INCH
Maximum Operating Temperature:	85 Cel

Category Top Products

C3E-25.000-12-3030-X

Aker Technology

Aker Technology's C3E-25.000-12-3030-X is a crystal oscillator with a frequency tolerance of 30 ppm and stability of 30%. It operates at a nominal frequency of 25 MHz and has a series resistance of 100 ohm. This surface mount device is commonly used in applications requiring precise timing and frequency control.

MA-40612.0000M-C0:ROHS

Seiko Epson

MA-40612.0000M-C0:ROHS by Seiko Epson is a 12 MHz crystal oscillator with 50 ppm frequency tolerance and 30% stability. Ideal for applications requiring precise timing, it operates b/w -20 to 70 °C, features tin terminal finish, and has a compact size of 11.7mm x 4mm x 3.7mm for surface mount installation.

ATS12ASM-1

Cts

The Cts ATS12ASM-1 crystal oscillator offers 30 ppm frequency tolerance, 50% stability, and 40 ohm series resistance. Ideal for applications requiring a parallel-fundamental type resonator at 12 MHz with -20 to 70 °C operating temperature range. Suitable for surface mount setups due to its compact size of 11.1mm x 4.83mm x 4.3 mm.

FC-135R32.7680KF-A3

Seiko Epson

Seiko Epson's FC-135R32.7680KF-A3 crystal oscillator offers 144% frequency stability, 3 PPM aging, and a drive level of 0.5 uW. Ideal for applications requiring precise timing at frequencies of 0.032768 MHz, such as in telecommunications equipment or industrial automation systems.

445W23J25M00000

Cts

CTS 445W23J25M00000 crystal oscillator offers 20 ppm frequency tolerance, 30% stability, and 40 ohm series resistance. Ideal for applications requiring precise timing at 25 MHz with parallel fundamental type and gold over nickel finish.

ABLS-19.6608MHZ-B-2-T

Abracon

ABLS-19.6608MHZ-B-2-T by Abracon is a 19.6608 MHz crystal oscillator with 20 ppm frequency tolerance and 50% stability. Ideal for applications requiring precise timing, it operates b/w -20 to 70 °C, featuring a parallel-fundamental crystal type and surface mounting feature.

CM41532768DZCT

Citizen Finedevice

Citizen Finedevice CM41532768DZCT crystal oscillator offers 20 ppm frequency tolerance, 122% stability, and 70000 ohm series resistance. Ideal for applications requiring precise timing at 0.032768 MHz, such as IoT devices and wearables due to its compact size of 4.1mm x 1.5mm x 0.9mm and low drive level of 1 uW.

MC-40532.7680K-A0:ROHS

Seiko Epson

MC-40532.7680K-A0:ROHS by Seiko Epson is a crystal oscillator with 20 ppm frequency tolerance, 144% stability, and 50000 ohm series resistance. Ideal for applications requiring 0.032768 MHz nominal frequency in temperatures ranging from -40 to 85 °C.

X32K768L104

Ael Crystals

PARALLEL - FUNDAMENTAL; Mounting Feature: THROUGH HOLE MOUNT; Frequency Tolerance: 20 ppm; Aging: 5 PPM/FIRST YEAR; Load Capacitance: 12.5 pF; Physical Dimension: 2.9mm x 8.0mm;

ECS-.327-6-34QCN-TR

Ecs International

ECS-0.327-6-34QCN-TR by Ecs International is a crystal oscillator with 10 ppm frequency tolerance, 144% stability, and 70000 ohm series resistance. It operates at 0.032768 MHz and is ideal for applications requiring precise timing in temperature-sensitive environments. With gold terminal finish and compact dimensions of 3.2mm x 1.5mm x 0.9mm, it offers reliable performance from -40 to 85 °C.

9HT12-32.768KAZF-T

Txc

PARALLEL - FUNDAMENTAL; Mounting Feature: SURFACE MOUNT; Frequency Tolerance: 30 ppm; Aging: 3 PPM/FIRST YEAR; Drive Level: .5 uW; Physical Dimension: L1.6XB1.0XH0.5 (mm)/L0.063XB0.039XH0.02 (inch);

R1612-25.000-9-F-1010-TR

Raltron Electronics

Raltron Electronics' R1612-25.000-9-F-1010-TR is a crystal oscillator with 10 ppm frequency tolerance and 10% stability, suitable for applications requiring precise timing. With a series resistance of 150 ohm, it operates at frequencies up to 25 MHz and features a parallel fundamental crystal type. Ideal for surface mount setups, this component has a compact size of 1.6mm x 1.25mm x 0.32mm and can withstand temperatures from -10°C to 60°C.

ABM3-8.000MHZ-D2Y-T

Abracon

ABM3-8.000MHZ-D2Y-T by Abracon is a crystal oscillator with 20 ppm frequency tolerance and 30% frequency stability. It is used in applications requiring an 8 MHz nominal operating frequency, such as communication systems and microcontrollers.

FC-13532.7680KA-A

Seiko Epson

Seiko Epson's FC-13532.7680KA-A crystal oscillator offers 20 ppm frequency tolerance, 144% stability, and 70000 ohm series resistance. Ideal for applications requiring precise timing at a frequency of 0.032768 MHz, such as in telecommunications equipment or industrial automation systems.

LFXTAL016178REEL

Iqd Frequency Products

LFXTAL016178REEL by Iqd Frequency Products is a crystal oscillator with 20 ppm frequency tolerance, 50000 ohm series resistance, and -40 to 85 °C operating temperature range. It is ideal for applications requiring precise timing such as in communication systems, industrial automation, and consumer electronics.

ECS-120-20-5PX-TR

Ecs International

ECS-120-20-5PX-TR by Ecs International is a crystal oscillator with 30 ppm frequency tolerance, 50% stability, and 50 ohm series resistance. Ideal for applications requiring a parallel-fundamental crystal resonator at 12 MHz, it operates b/w -10°C to 70°C with matte tin copper finish and surface mount feature.

ABLS-25.000MHZ-12-F-T

Abracon

ABLS-25.000MHZ-12-F-T by Abracon is a 25 MHz crystal oscillator with 50 ppm frequency tolerance and 50% stability. Ideal for applications requiring precise timing, it operates b/w 0°C to 70°C with a low drive level of 100 uW.

ABM11AIG-20.000MHZ-4Z-T3

Abracon

ABM11AIG-20.000MHZ-4Z-T3 by Abracon is a 20 MHz crystal oscillator with 30 ppm frequency tolerance and 50% stability. Ideal for applications requiring precise timing, such as telecommunications equipment or industrial automation systems.

FOXSDLF/160-20-T1

Fox Electronics

FOXSDLF/160-20-T1 by Fox Electronics is a 16MHz crystal oscillator with 30ppm frequency tolerance and 50% stability. Ideal for applications requiring precise timing, it operates b/w -20°C to 70°C with a load capacitance of 20pF. Its compact size of 11.7mm x 5.0mm x 4.5mm makes it suitable for surface mount installations in various electronic devices.

MA-50612.0000M-C0:ROHS

Seiko Epson

MA-50612.0000M-C0:ROHS by Seiko Epson is a 12 MHz crystal oscillator with 50 ppm frequency tolerance and 30% stability. Ideal for applications requiring precise timing, it operates b/w -20°C to 70°C, featuring a surface mount design and low drive level of 10 uW.