Image shown is a representation only. Exact specifications should be obtained from the product data sheet.

33466

Manufacturer

Weidmueller & Kg
Manufacturer's Part Number

33466
Description

RING TERMINAL; Wire Gauge: 6 AWG; Safety Approval: UL; No. of Ways: 1; Wire Cross Section: 16.8 mm2; Terminal Gender: FEMALE;
Datasheet

Datasheet

Not In Stock

Popular Products

MMBT2907ALT1G

Onsemi

MMBT2907ALT1G by Onsemi is a PNP BJT transistor with 100 min hFE, 60V VCEO, and 200MHz fT. Ideal for switching applications, it has a small outline package with Gull Wing terminals and can handle up to 0.6A of collector current.

Details

BAV99

Temic Semiconductors

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

BAV99

Infinex

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

LL4148

Kec

RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;

Details

2N2222A

NXP Semiconductors

NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; Maximum Operating Temperature: 150 Cel;

Details

1N4148WT

Eic Semiconductor

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

FDN5618P

Onsemi

FDN5618P by Onsemi is a P-CHANNEL Power FET with 60V DS Breakdown Voltage. It features a single configuration with built-in diode, suitable for switching applications. With 10A IDM and 0.17 ohm RDS(on), it operates in the temperature range of -55 to 150 °C, making it ideal for various electronic devices.

Details

SS14

Meritek Electronics

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

LM358MX

National Semiconductor

OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;

Details

1N4148WT

Tak Cheong Electronics Holdings

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

SMBJ18CA

Jgd Semiconductors

TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Polarity: BIDIRECTIONAL; Maximum Clamping Voltage: 29.2 V; Nominal Breakdown Voltage: 21.2 V; Maximum Repetitive Peak Reverse Voltage: 18 V;

Details

CRCW080510K0FKEA

Vishay Intertechnology

Vishay Intertechnology's CRCW080510K0FKEA is a fixed resistor with 10000 ohm resistance, 1% tolerance, and 0.125 W power dissipation. Ideal for surface mount applications in automotive electronics due to AEC-Q200 reference standard compliance and -55 to 155 °C operating temperature range.

Details

SMBJ18CA

First Components International

TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Maximum Clamping Voltage: 29.2 V; Nominal Breakdown Voltage: 21.1 V; Polarity: BIDIRECTIONAL; Maximum Repetitive Peak Reverse Voltage: 18 V;

Details

BSS84PH6327XTSA2

Infineon Technologies

BSS84PH6327XTSA2 by Infineon is a P-CHANNEL FET with 60V DS breakdown voltage, ideal for switching applications. It features a single configuration with built-in diode and operates in enhancement mode. With a max drain current of 0.17A and on-resistance of 8 ohm, it offers reliable performance in small outline packages.

Details

1N4148WS

Meritek Electronics

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

BSS138

Good-ark Electronics

N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain-Source On Resistance: 6 ohm; Minimum DS Breakdown Voltage: 50 V; Operating Mode: ENHANCEMENT MODE;

Details

1N4148

Renesas Electronics

RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;

Details

M24308/2-1F

Amphenol

D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Body or Shell Style: RECEPTACLE; Body Length: 1.228 inch; No. of Rows Loaded: 2;

Details

2N7002

Lite-on Semiconductor

N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Qualification: Not Qualified; Additional Features: LOW THRESHOLD; Minimum DS Breakdown Voltage: 60 V;

Details

NDT2955

Fairchild Semiconductor

P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 3 W; Package Style (Meter): SMALL OUTLINE; Maximum Drain Current (Abs) (ID): 2.5 A;

Details

33466 Technical Details

TYPE	DESCRIPTION
Other Names:	2266-33466 A27074 -1262493-SI -33466-SI 33466-ND -1262493-SI-ND
Total Ways:	1
Wire Cross Section:	16.8 mm²
Terminal Gender:	Female
Product Type:	Ring Terminal
Safety Compliance:	UL
Wire Gauge:	6 AWG

Category Top Products

M81824/12-3

TE Connectivity

WIRE TERMINAL; Mounting Type: CABLE; Wire Gauge: 12 AWG; Safety Approval: UL; Wire Cross Section: 2.94 mm2;

MS25036-149

Panduit

RING TERMINAL; Additional Features: NYLON; Wire Gauge: 18 AWG; Voltage (Rated): 600 V; Safety Approval: CSA; UL; Wire Cross Section: 1.5 mm2;

1786840

Phoenix Contact

Phoenix Contact 1786840 is a 2-row barrier strip terminal block with 6 ways. Rated for 160V voltage and 8A current, it has CB, CUL, UL, VDE safety approvals. Ideal for board mounting applications using connector fastening method.

64322-1039

Molex

FORK TERMINAL; Wire Gauge: 20 AWG; Wire Cross Section: .5 mm2; Terminal Gender: FEMALE;

52422-1

Tyco Electronics Amp

FORK TERMINAL; Wire Gauge: 14 AWG; Voltage (Rated): 300 V; Wire Cross Section: 2 mm2; Safety Approval: UL; Terminal Gender: FEMALE;

1725672

Phoenix Contact

Phoenix Contact 1725672 is a BARRIER STRIP TERMINAL BLOCK with 4 ways, rated for 6A current and 160V voltage. It uses SCREW fastening method, supports wire gauge up to 20 AWG, and 0.5mm2 wire cross section. Ideal for BOARD mounting in applications requiring CSA/CUL/EAC/UL safety approvals.

34130

Weidmueller & Kg

WIRE TERMINAL;

2060-453/998-404

Wago

Wago's 2060-453/998-404 Barrier Strip Terminal Block is rated for 320V, 9A current, and supports wire gauge up to 18 AWG. Ideal for BOARD mounting, it has safety approvals from CCA, CSA, CUL, EN, IEC, KEMA. Suitable for applications requiring secure connections in limited space with 0.75mm2 wire cross section.

282834-8

TE Connectivity

TE Connectivity 282834-8 is a modular terminal block with 8 ways, rated for 10A current and 150V voltage. It uses screw fastening method, supports wire gauge up to 16 AWG, and has UL safety approval. Ideal for board mounting applications requiring terminals with wire cross section of 1.3 mm2.

1755752

Phoenix Contact

The Phoenix Contact 1755752 is a STRIP TERMINAL BLOCK with 4 ways and a rated voltage of 320V. It has a fastening method of CONNECTOR and can handle a current of up to 12A. This terminal block is suitable for BOARD mounting and has safety approvals from CB, CSA, CUL, EAC, EN, UL, and VDE.

MS-25036-105

Molex

RING TERMINAL; Additional Features: NYLON; Wire Gauge: 18 AWG; Voltage (Rated): 600 V; Wire Cross Section: 1.5 mm2; Safety Approval: CSA; UL;

MC1,5/4-ST-3,5

Phoenix Contact

BARRIER STRIP TERMINAL BLOCK;

2-33458-3

TE Connectivity

RING TERMINAL; Wire Gauge: 10 AWG; No. of Ways: 1; Safety Approval: UL; Terminal Gender: FEMALE; Wire Cross Section: 6 mm2;

1840382

Phoenix Contact

The Phoenix Contact 1840382 is a modular terminal block with 4 ways, rated for 8A current and 160V voltage. It features screw fastening method and accepts wire gauge up to 16 AWG (1.5 mm²). Ideal for cable mounting applications, UL approved for safety compliance.

2-320569-3

Tyco Electronics Amp

RING TERMINAL; Wire Gauge: 10 AWG; Voltage (Rated): 300 V; Safety Approval: UL; Terminal Gender: FEMALE; No. of Ways: 1;

1725669

Phoenix Contact

Phoenix Contact 1725669 is a BARRIER STRIP TERMINAL BLOCK with 3 ways, rated for 6A current and 63V voltage. It uses SCREW fastening method, supports wire gauge up to 20 AWG, and wire cross section of 0.5 mm2. Ideal for BOARD mounting applications with CSA and UL safety approvals.

33466

Not In Stock

Popular Products

MMBT2907ALT1G

BAV99

BAV99

LL4148

2N2222A

1N4148WT

FDN5618P

SS14

LM358MX

1N4148WT

SMBJ18CA

CRCW080510K0FKEA

SMBJ18CA

BSS84PH6327XTSA2

1N4148WS

BSS138

1N4148

M24308/2-1F

2N7002

NDT2955

33466 Technical Details

Category Top Products

M81824/12-3

MS25036-149

1786840

64322-1039

52422-1

1725672

34130

2060-453/998-404

282834-8

1755752

MS-25036-105

MC1,5/4-ST-3,5

2-33458-3

1840382

2-320569-3

1725669

2-35109-1

MS-25036-102

282834-2

1065