Image shown is a representation only. Exact specifications should be obtained from the product data sheet.

261-321/341-000

Manufacturer

Wago
Manufacturer's Part Number

261-321/341-000
Description

MODULAR TERMINAL BLOCK; Mounting Type: DIN RAIL; Fastening Method: PUSH-ON; Additional Features: SIDE ENTRY; Wire Gauge: 14 AWG; Voltage (Rated): 500 V;
Datasheet

Datasheet

Not In Stock

Popular Products

LM2931Z-5.0RPG

Onsemi

LM2931Z-5.0RPG by Onsemi is a Fixed Positive Single Output LDO Regulator with 5V Nominal Output Voltage, 0.1A Max Output Current, and 6V Min Input Voltage. It operates in temperatures ranging from -40 to 125 °C and is ideal for applications requiring stable voltage regulation in electronic circuits.

Details

LM358N

Motorola

OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;

Details

CRCW080510K0FKEA

Vishay Intertechnology

Vishay Intertechnology's CRCW080510K0FKEA is a fixed resistor with 10000 ohm resistance, 1% tolerance, and 0.125 W power dissipation. Ideal for surface mount applications in automotive electronics due to AEC-Q200 reference standard compliance and -55 to 155 °C operating temperature range.

Details

LM358ADR

Texas Instruments

LM358ADR by Texas Instruments is an operational amplifier with 2 functions, featuring a max input offset voltage of 5000 uV and nominal voltage of 5V. Widely used in applications requiring high voltage gain, it operates within a temperature range of 0-70°C and offers frequency compensation for stability.

Details

SS14

Jgd Semiconductors

RECTIFIER DIODE; Surface Mount: YES; Technology: SCHOTTKY; Maximum Non Repetitive Peak Forward Current: 30 A; Maximum Forward Voltage (VF): .55 V; No. of Phases: 1;

Details

2N2222A

Itt Semiconductor

NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;

Details

AT90CAN128-16AU

Microchip Technology

AT90CAN128-16AU by Microchip Technology is a microcontroller with 8-bit data RAM and 16-bit address bus width. It operates at a max clock frequency of 16 MHz, making it suitable for industrial applications requiring low power mode and connectivity options like CAN, SPI, and USART. With 53 I/O lines and 8-channel 10-bit ADCs, this microcontroller offers versatile peripheral support for various embedded systems.

Details

1N4148

Dc Components

RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;

Details

2N7002,215

NXP Semiconductors

2N7002,215 by NXP Semiconductors is a small signal N-CHANNEL FET with a min DS breakdown voltage of 60V and max drain current of 0.3A. It is used for switching applications in enhancement mode, operates b/w -65 to 150 °C, and has a max power dissipation of 0.2W.

Details

LM358N

Intersil

OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;

Details

2N7002

Kec

N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR; Transistor Application: SWITCHING; Package Body Material: PLASTIC/EPOXY;

Details

LM107H/883

Linear Technology

OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Technology: BIPOLAR;

Details

1N4148

International Semiconductor

RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;

Details

1N4148

General Diode

RECTIFIER DIODE; Surface Mount: NO; Maximum Output Current: .15 A; Maximum Reverse Recovery Time: .004 us; Terminal Finish: Tin/Lead (Sn/Pb); No. of Elements: 1;

Details

2N7002

National Semiconductor

N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Package Style (Meter): SMALL OUTLINE; Terminal Position: DUAL;

Details

AT90CAN128-16AU

Atmel

MICROCONTROLLER, RISC; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 64; Package Code: TQFP; Package Shape: SQUARE;

Details

DS18B20Z

Maxim Integrated

DS18B20Z by Maxim Integrated is a 12-bit digital temperature sensor with 1-Wire interface. It operates b/w -55 to 125°C, with ±0.5°C accuracy. Suitable for applications requiring precise temperature monitoring in compact spaces.

Details

BAV99

Allegro MicroSystems

RECTIFIER DIODE; Terminal Position: END; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

CRCW04020000Z0ED

Vishay Intertechnology

Vishay Intertechnology's CRCW04020000Z0ED is a 0 ohm jumper resistor with METAL GLAZE/THICK FILM tech. Operating b/w -55 to 155 °C, it suits SMT applications in automotive electronics due to AEC-Q200 compliance and 0.063 W power dissipation.

Details

OPA2227UA

Texas Instruments

OPA2227UA by Texas Instruments is a dual operational amplifier with low-offset voltage of 200 uV and bias current of 0.01 uA. It operates at temperatures ranging from -40 to 85 °C, making it suitable for industrial applications requiring precise signal amplification. With a unity gain bandwidth of 8000 kHz, this op amp is ideal for high-frequency circuit designs.

Details

261-321/341-000 Technical Details

TYPE	DESCRIPTION
Mounting Style:	DIN-Rail
Other Names:	0261-321/341-000 2946-261-321/341-000 261321/341000 0261-0321/0341-0000 2943-261-321/341-000 0261321/341000 2943-261-321/341-000-ND 51138982
Total Ways:	2
Total Rows:	2
Fastening Style:	Push-On
Wire Gauge:	14 AWG
Total Decks:	1
Rated Voltage:	500 V
Wire Cross Section:	2.5 mm²
Product Type:	Modular Terminal Block
Safety Compliance:	CSA; UL
Additional Features:	Side Entry
Rated Current:	24 A

Category Top Products

1733651

Phoenix Contact

Phoenix Contact 1733651 is a BARRIER STRIP TERMINAL BLOCK with 10 ways, rated for 17.5A current and 400V voltage. It uses SCREW fastening method and supports wire gauge up to 14 AWG. Ideal for BOARD mounting, it has safety approvals from CB, CCA, CSA, CUL, GOST, and UL.

2-520102-2

TE Connectivity

TE Connectivity 2-520102-2 is a UL-approved TAB TERMINAL for 18 AWG wire with 600V rating. Ideal for male terminals, it supports 0.82 mm2 wire cross section, commonly used in electrical connections.

282837-2

Tyco Electronics Amp

MODULAR TERMINAL BLOCK; Mounting Type: BOARD; Fastening Method: SCREW; Additional Features: STANDARDS: IEC 998-1/998-2-1, PA 6-6, 94V-0; Wire Gauge: 15 AWG; Voltage (Rated): 300 V;

1803594

Phoenix Contact

Phoenix Contact 1803594 is a UL-approved modular terminal block for cables with 16 AWG wire gauge. It supports up to 160V voltage and 8A current, with a wire cross section of 1.5mm2. Ideal for applications requiring secure screw fastening in a 4-way configuration.

621

Tyco Electronics Amp

MODULAR TERMINAL BLOCK; Mounting Type: CABLE; Fastening Method: SCREW; Additional Features: POLYAMIDE; Wire Gauge: 10 AWG; Voltage (Rated): 300 V;

MS-25036-157

Molex

RING TERMINAL; Additional Features: NYLON; Wire Gauge: 10 AWG; Voltage (Rated): 600 V; Safety Approval: CSA; UL; Wire Cross Section: 6 mm2;

1231360000

Weidmueller & Kg

BARRIER STRIP TERMINAL BLOCK;

3555

Keystone Electronics

PUSH-ON TERMINAL; Terminal Gender: FEMALE;

2-36161-3

Tyco Electronics Amp

RING TERMINAL; Wire Gauge: 12 AWG; Voltage (Rated): 300 V; Terminal Gender: FEMALE; Safety Approval: UL; No. of Ways: 1;

731

Zierick Manufacturing

POWER TERMINAL; Additional Features: MATERIAL: BRASS, TIN PLATED; Current (Rated): 30 A;

282834-3

Tyco Electronics Amp

MODULAR TERMINAL BLOCK; Mounting Type: BOARD; Fastening Method: SCREW; Wire Gauge: 16 AWG; Voltage (Rated): 150 V; No. of Decks: 1;

1043

Ntt

LUG TERMINAL; Additional Features: MATERIAL: STEEL; FINISH: TIN;

2002-1401

Wago

The Wago 2002-1401 is a DIN RAIL mounted MODULAR TERMINAL BLOCK with 12 AWG wire gauge, rated for 800V and 32A current. Featuring a spring-loaded fastening method, it supports up to 4mm2 wire cross-section. Ideal for industrial applications requiring secure electrical connections in limited space.

1803578

Phoenix Contact

The Phoenix Contact 1803578 is a BARRIER STRIP TERMINAL BLOCK with 2 ways, rated for 8A current and 160V voltage. It accepts wire gauge up to 16 AWG (1.5 mm²) and is UL approved for safety. Ideal for CABLE mounting applications requiring secure connections with screw fastening method.

1715721

Phoenix Contact

Phoenix Contact 1715721 is a BOARD-mounted BARRIER STRIP TERMINAL BLOCK with 14 AWG wire gauge, rated for 400V voltage and 17.5A current. It has CCA, CSA, CUL, GL, GOST, SEV safety approvals and is ideal for applications requiring secure electrical connections in industrial settings.

3209578

Phoenix Contact

Phoenix Contact 3209578 is a DIN RAIL mounted MODULAR TERMINAL BLOCK with UL & CSA approval. It supports 12 AWG wire, 800V voltage, and 4mm2 wire cross section. Ideal for applications requiring fast PUSH-IN installation with a rated current of 24A in up to 4 ways.

1247

Keystone Electronics

TAB TERMINAL;

796634-2

TE Connectivity

TE Connectivity's 796634-2 is a BARRIER STRIP TERMINAL BLOCK for CABLE mounting. With UL approval, it supports 12 AWG wire gauge at 300V and 15A current. Ideal for applications requiring secure male terminal connections with screw fastening in a 2-way configuration.

1745904

Phoenix Contact

The Phoenix Contact 1745904 is a Barrier Strip Terminal Block with 3 ways, rated for 8A current and 160V voltage. It features a push-in fastening method and accepts wire gauge up to 16 AWG (1.5 mm2). Ideal for industrial applications requiring secure electrical connections.

1705469

Phoenix Contact

The Phoenix Contact 1705469 is a STRIP TERMINAL BLOCK with a wire cross section of 2.5 mm2 and a rated voltage of 400 V. It has a fastening method using screws and can handle a rated current of 20 A. This terminal block is suitable for use in various applications requiring secure electrical connections on circuit boards.