Image shown is a representation only. Exact specifications should be obtained from the product data sheet.

231-532/001-000

Manufacturer

Wago
Manufacturer's Part Number

231-532/001-000
Description

STRIP TERMINAL BLOCK; Mounting Type: BOARD; Fastening Method: CONNECTOR; Additional Features: STANDARD: 94V-0, POLYAMIDE66, SAFETY APPROVAL: IEC; KEMA; KEUR; UL; Voltage (Rated): 600 V; No. of Ways: 2;
Datasheet

Datasheet

Not In Stock

Popular Products

2N7002

Bytesonic Electronics

N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .225 W; Terminal Position: DUAL; Minimum Operating Temperature: -55 Cel;

Details

LM358N

Taejin Technology

OPERATIONAL AMPLIFIER; Temperature Grade: AUTOMOTIVE; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;

Details

SS14

SPC TECHNOLOGY/ MULTICOMP

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

1N4148

Won-top Electronics

RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;

Details

FDD5614P

Onsemi

FDD5614P by Onsemi is a P-CHANNEL Power FET with 60V DS Breakdown Voltage, ideal for SWITCHING applications. It features 45A IDM and 0.1 ohm RDS(ON), operating in ENHANCEMENT MODE at up to 175°C. The PLASTIC/EPOXY package with GULL WING terminals ensures efficient heat dissipation and reliable performance.

Details

BSS138DW-7-F

Diodes Incorporated

BSS138DW-7-F by Diodes Incorporated is a N-channel small signal FET with a min DS breakdown voltage of 50V. It is used for switching applications and operates in enhancement mode. This surface mount transistor has a max drain current of 0.2A and a max power dissipation of 0.2W.

Details

261

New England Microwave

Other Interface ICs; No. of Terminals: 14; Package Equivalence Code: FL14(UNSPEC); Power Supplies (V): +-5,-15; Package Body Material: PLASTIC/EPOXY; Surface Mount: YES;

Details

LM7805CT/NOPB

National Semiconductor

FIXED POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; Maximum Voltage Tolerance: 5 %; Operating Temperature (TJ-Max): 125 Cel; Maximum Output Voltage-1: 5.25 V;

Details

LM555CM

Onsemi

PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;

Details

BAV99

NXP Semiconductors

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

1N4148

Leshan Radio

RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;

Details

BAV99

Fairchild Semiconductor

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

SMBJ18CA

Semtech

TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

BSS138BKW,115

Nexperia

N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Terminal Finish: TIN; No. of Terminals: 3; Additional Features: LOGIC LEVEL COMPATIBLE;

Details

2N2222A

Microsemi

NPN; Configuration: SINGLE; Surface Mount: NO; Maximum Collector Current (IC): .8 A; Minimum DC Current Gain (hFE): 30; No. of Elements: 1;

Details

CL31B104KBCNNNC

Samsung Electro-mechanics

Samsung Electro-mechanics CL31B104KBCNNNC is a ceramic capacitor with 0.1uF capacitance and 50V rated DC voltage. It features X7R temperature characteristics, -55 to 125 °C operating range, and compact SMT package style. Ideal for applications requiring high reliability in compact electronic devices.

Details

IRLML6402TRPBF

Infineon Technologies

IRLML6402TRPBF by Infineon is a P-CHANNEL FET for SWITCHING applications. It features a 20V DS Breakdown Voltage, 22A IDM, and 0.065 ohm RDS(on). With a small outline package and matte tin finish, it operates in temperatures from -55 to 150 °C.

Details

2N2222A

Swampscott Electronics

NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;

Details

2N2222A

Raytheon Semiconductor

NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Minimum DC Current Gain (hFE): 100; Maximum Turn On Time (ton): 35 ns;

Details

SS14

Yangzhou Yangjie Electronics

RECTIFIER DIODE; Surface Mount: YES; Technology: SCHOTTKY; No. of Phases: 1; Config: SINGLE; Maximum Operating Temperature: 125 Cel;

Details

231-532/001-000 Technical Details

TYPE	DESCRIPTION
Mounting Style:	Board
Other Names:	0231-532/001-000 231532/001000 2943-231-532/001-000-ND 2946-231-532/001-000 0231-0532/0001-0000 0231532/001000 51149278 2943-231-532/001-000
Total Ways:	2
Product Type:	Strip Terminal Block
Safety Compliance:	ABS; BV; CB; CSA; DNVGL; EN
Additional Features:	Standard: 94V-0, PA66, Safety Approval: IEC; KEMA; KEUR; UL
Total Rows:	1
Fastening Style:	Connector
Rated Current:	10 A
Total Decks:	1
Rated Voltage:	600 V

Category Top Products

9-160481-1

Tyco Electronics Amp

PUSH-ON TERMINAL; Additional Features: NYLON; Wire Gauge: 16 AWG; Voltage (Rated): 300 V; Safety Approval: UL; Wire Cross Section: 1.5 mm2;

3-140

Cinch Connectivity Solutions

BARRIER STRIP TERMINAL BLOCK; Fastening Method: SCREW; Additional Features: PHENOLIC, 94V-1; Wire Gauge: 16 AWG; Voltage (Rated): 250 V; No. of Decks: 1;

63824-1

Tyco Electronics Amp

TAB TERMINAL; Terminal Gender: MALE; Manufacturer Series: 63824;

640903-2

TE Connectivity

TE Connectivity's 640903-2 is a female PUSH-ON TERMINAL with UL approval, rated for 300V and 18 AWG wire. Ideal for applications requiring 0.96 mm2 wire cross section such as automotive and industrial electronics.

63824-1

TE Connectivity

TAB TERMINAL; Terminal Gender: MALE; Safety Approval: UL;

4471

Keystone Electronics

WIRE TERMINAL;

22-8

J S T Mfg

RING TERMINAL; Wire Gauge: 4 AWG; Wire Cross Section: 26.66 mm2;

1289

Keystone Electronics

TAB TERMINAL; Terminal Gender: MALE;

4-796634-2

TE Connectivity

TE Connectivity 4-796634-2 is a UL-approved strip terminal block with 11 ways. It supports 12 AWG wire gauge, 3 mm2 wire cross section, and rated for 300V/15A. Ideal for cable mounting applications requiring secure screw fastening.

160864-2

TE Connectivity

TE Connectivity 160864-2 is a UL-approved PUSH-ON TERMINAL for 17 AWG wire, rated at 250V. With a wire cross section of 1.03 mm2, this FEMALE terminal block is ideal for various electrical applications.

1-1776263-5

Tyco Electronics Amp

BARRIER STRIP TERMINAL BLOCK; Mounting Type: BOARD; Fastening Method: SCREW; Additional Features: STANDARD: UL94V-0, POLYAMIDE/ POLYESTER; Wire Gauge: 16 AWG; Voltage (Rated): 300 V;

3044076

Phoenix Contact

Phoenix Contact 3044076 is a Strip Terminal Block with 2 Rows, rated for 600V/20A. It supports wire gauge up to 12 AWG and wire cross section of 2.5mm². Ideal for CABLE mounting applications, it holds safety approvals from CSA, UL, and VDE.

MC1,5/2-ST-3,81

Phoenix Contact

Phoenix Contact's MC1,5/2-ST-3,81 is a 2-way barrier strip terminal block with a rated voltage of 160V and current of 8A. It supports wire gauge up to 16 AWG and wire cross-section of 1.5mm², making it ideal for industrial applications requiring secure connections in tight spaces. The terminal block is approved by CB, CSA, CUL, EAC, UL, and VDE for safety compliance.

3967

Vogt Ag Verbindungstechnik

PUSH-ON TERMINAL; Wire Gauge: 10 AWG; Wire Cross Section: 6 mm2; Terminal Gender: FEMALE;

18512-58

Beau Interconnect

BARRIER STRIP TERMINAL BLOCK; Mounting Type: BOARD; Fastening Method: SCREW; Additional Features: PANEL MOUNT, PHENOLIC, 94V-0; Wire Gauge: 12 AWG; Voltage (Rated): 300 V;

38770-0112

Molex

BARRIER STRIP TERMINAL BLOCK; Mounting Type: BOARD; Fastening Method: SCREW; Additional Features: PBT; No. of Ways: 24; No. of Rows: 2;

1497

Abbatron

LUG TERMINAL;

1844210

Phoenix Contact

The Phoenix Contact 1844210 is a BOARD-mounted BARRIER STRIP TERMINAL BLOCK with CSA, UL, VDE safety approvals. It has a rated voltage of 300V and current of 8A, suitable for applications requiring secure connections in industrial settings. The connector fastening method and 2-way configuration make it ideal for various terminal connection needs.

1714968

Phoenix Contact

Phoenix Contact 1714968 is a UL-approved barrier strip terminal block for boards. It supports wire gauge up to 10 AWG with 4 mm2 wire cross section and rated voltage of 500V. With fastening by screws, it has a current rating of 32A and offers 3 ways for secure connections in various applications.

1SNK505064R0000

TE Connectivity

TE Connectivity's 1SNK505064R0000 is a DIN RAIL mounted MODULAR TERMINAL BLOCK with UL safety approval. It supports wire gauge up to 12 AWG, voltage rating of 600 V, and current rating of 20 A. Ideal for applications requiring secure electrical connections in industrial settings.