Image shown is a representation only. Exact specifications should be obtained from the product data sheet.

2-320568-1

Manufacturer

TE Connectivity
Manufacturer's Part Number

2-320568-1
Description

RING TERMINAL; Wire Gauge: 10 AWG; Voltage (Rated): 300 V; Terminal Gender: FEMALE; No. of Ways: 1; Wire Cross Section: 6 mm2;
Datasheet

Datasheet

Not In Stock

Popular Products

1N4148WS

First Components International

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

LM358N

Philips Semiconductors

OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;

Details

FT232RL-TUBE

FTDI

FTDI's FT232RL-TUBE is a bus controller with 28 terminals, operating at 3.3-5.25V. It supports USB, VBUS, and UART interfaces with a data transfer rate of 60MBps. Ideal for industrial applications requiring RS232/RS422/RS485 compatibility in compact designs due to its small outline package style.

Details

LM317T

Micro Commercial Components

ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; Moisture Sensitivity Level (MSL): 1; Maximum Output Current-1: 1.5 A; Operating Temperature (TJ-Min): 0 Cel;

Details

2N7002

Lite-on Semiconductor

N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Qualification: Not Qualified; Additional Features: LOW THRESHOLD; Minimum DS Breakdown Voltage: 60 V;

Details

SMBJ18CA

Vishay Intertechnology

Vishay Intertechnology's SMBJ18CA is a bidirectional TRANS VOLTAGE SUPPRESSOR DIODE with a max clamping voltage of 29.2 V and a breakdown voltage of 21.05 V. It is surface mountable and commonly used in transient suppression applications.

Details

SS14

Onsemi

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

ESD5Z5.0T1G

Onsemi

ESD5Z5.0T1G by Onsemi is a unidirectional Trans Voltage Suppressor Diode with 5V reverse test voltage and 174W peak power dissipation. It is used for transient suppression in electronic circuits, meeting IEC-61000-4-2, 4-4 standards and UL recognized for reliability.

Details

CRCW040210K0FKED

Vishay Intertechnology

Vishay Intertechnology's CRCW040210K0FKED is a fixed resistor with 10000 ohm resistance, 1% tolerance, and 0.063 W power dissipation. Ideal for surface mount applications in electronics due to its compact SMT package style and high operating temperature range of -55 to 155 °C.

Details

2N2222A

Infineon Technologies

NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;

Details

1N4148

Baneasa S A

RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;

Details

BAV99

Allegro MicroSystems

RECTIFIER DIODE; Terminal Position: END; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

2N7002

Comchip Technology

N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Maximum Operating Temperature: 150 Cel; Operating Mode: ENHANCEMENT MODE;

Details

BAV99

Won-top Electronics

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

KSZ9031RNXIC

Microchip Technology

KSZ9031RNXIC by Microchip Technology is a network interface chip with 1 transceiver. It operates at a data rate of 1000 Mbps and has a nominal voltage of 1.2V. This chip is commonly used in industrial applications requiring Ethernet connectivity.

Details

PIC18F4550T-I/PT

Microchip Technology

The Microchip Technology PIC18F4550T-I/PT microcontroller operates at a max clock frequency of 48 MHz with 8-bit architecture. It features 13-Ch 10-Bit ADC channels and USB connectivity, making it suitable for industrial applications requiring high-speed data processing and analog-to-digital conversion. With low power mode and flash ROM programmability, this device offers efficient performance in compact designs.

Details

ULN2803A

Sanken Electric

NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; JESD-30 Code: R-PDIP-T18; Package Body Material: PLASTIC/EPOXY;

Details

LAN8720AI-CP-TR

Microchip Technology

LAN8720AI-CP-TR by Microchip is an Ethernet transceiver with 100 Mbps data rate, operating at -40 to 85 °C. It features a 3.3 V supply voltage, 54 mA supply current, and TS 16949 screening level. Ideal for network interfaces in industrial applications due to its compact square package and low profile design.

Details

2N7002

National Semiconductor

N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Package Style (Meter): SMALL OUTLINE; Terminal Position: DUAL;

Details

LM555CM

Intersil

Analog Waveform Generation Functions; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;

Details

2-320568-1 Technical Details

TYPE	DESCRIPTION
Other Names:	23205681 A28130 2-320568-1-ND A28130-ND 2266-2-320568-1 A27280TR A27280CT
Total Ways:	1
Wire Cross Section:	6 mm²
Terminal Gender:	Female
Product Type:	Ring Terminal
Safety Compliance:	UL
Wire Gauge:	10 AWG
Rated Voltage:	300 V

Category Top Products

190030040

Molex

PUSH-ON TERMINAL; Wire Gauge: 14 AWG; Terminal Gender: FEMALE;

619

Tyco Electronics Amp

MODULAR TERMINAL BLOCK; Mounting Type: CABLE; Fastening Method: SCREW; Additional Features: POLYAMIDE; Wire Gauge: 8 AWG; Voltage (Rated): 300 V;

MS25036-148

Defense Logistics Agency

RING TERMINAL; Additional Features: COPPER; Wire Gauge: 16 AWG; Voltage (Rated): 300 V; Wire Cross Section: 1.42 mm2; Terminal Gender: FEMALE;

MSTB2,5/2-ST-5,08

Phoenix Contact

Phoenix Contact's MSTB2,5/2-ST-5,08 is a UL-approved barrier strip terminal block with 2.5mm² wire cross section and 12A rated current. It features screw fastening method for 12 AWG wires at 250V. Ideal for connector mounting applications requiring reliable electrical connections in limited space.

1787454

Phoenix Contact

BARRIER STRIP TERMINAL BLOCK;

1287-STR

Keystone Electronics

TAB TERMINAL;

4622-0-15-01-30-27-10-0

Mill-max Mfg

PCB TERMINAL; Terminal Gender: FEMALE;

160173-2

TE Connectivity

PUSH-ON TERMINAL; Wire Gauge: 20 AWG; Terminal Gender: FEMALE; Wire Cross Section: .51 mm2; Safety Approval: UL;

3044644

Phoenix Contact

MODULAR TERMINAL BLOCK;

733-108

Wago

Wago 733-108 is a modular terminal block with 8 ways, rated for 4A current and 150V voltage. It uses spring-loaded fastening method and supports wire gauge up to 20 AWG. Ideal for cable mounting applications, it holds CSA and UL safety approvals.

MS25036-111

Panduit

RING TERMINAL; Additional Features: NYLON; Wire Gauge: 10 AWG; Voltage (Rated): 600 V; Safety Approval: CSA; UL; Wire Cross Section: 6 mm2;

1840379

Phoenix Contact

The Phoenix Contact 1840379 is a modular terminal block with 3 ways and a rated current of 8A. It has a wire cross section of 1.5mm2 and is UL approved for safety. This terminal block is commonly used in cable mounting applications.

51864-1

TE Connectivity

TE Connectivity's 51864-1 is a UL-approved FEMALE RING TERMINAL for 14 AWG wire with a rated voltage of 300V. Its wire cross section is 2.08 mm2, making it ideal for various electrical applications requiring secure connections and reliable performance.

2002-1611/1000-541

Wago

MODULAR TERMINAL BLOCK;

12015870

Delphi Connection Systems

PUSH-ON TERMINAL; Wire Cross Section: 2 mm2; Terminal Gender: FEMALE;

MS25036-152

Defense Logistics Agency

RING TERMINAL; Additional Features: NYLON; Wire Gauge: 14 AWG; Voltage (Rated): 300 V; Wire Cross Section: 2.62 mm2; Safety Approval: UL;

320568

TE Connectivity

TE Connectivity 320568 is a UL-approved RING TERMINAL with a wire gauge of 10 AWG and rated voltage of 300 V. It is suitable for use in terminals & terminal blocks, offering a wire cross section of 6 mm2 and one-way connection.

1063

Ntt

LUG TERMINAL; Additional Features: MATERIAL: STEEL; FINISH: TIN;

1840382

Phoenix Contact

The Phoenix Contact 1840382 is a modular terminal block with 4 ways, rated for 8A current and 160V voltage. It features screw fastening method and accepts wire gauge up to 16 AWG (1.5 mm²). Ideal for cable mounting applications, UL approved for safety compliance.

MS25036-108

Hollingsworth

RING TERMINAL; Additional Features: MATERIAL: POLYAMIDE; Wire Gauge: 14 AWG; Voltage (Rated): 600 V; Safety Approval: CSA; MIL; UL; Wire Cross Section: 2.08 mm2;