Image shown is a representation only. Exact specifications should be obtained from the product data sheet.

3967

Manufacturer

Vogt Ag Verbindungstechnik
Manufacturer's Part Number

3967
Description

PUSH-ON TERMINAL; Wire Gauge: 10 AWG; Wire Cross Section: 6 mm2; Terminal Gender: FEMALE;
Datasheet

Datasheet

Not In Stock

Popular Products

BSS138

Panjit International

N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain-Source On Resistance: 3 ohm; Minimum DS Breakdown Voltage: 50 V; Terminal Form: GULL WING;

Details

BSS138

Micro Commercial Components

N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Package Shape: RECTANGULAR; Terminal Position: DUAL;

Details

1N4148

Philips Semiconductors

RECTIFIER DIODE; Surface Mount: NO; Terminal Finish: MATTE TIN; Maximum Operating Temperature: 200 Cel; Maximum Output Current: .15 A; JESD-609 Code: e3;

Details

1N4148

Vishay Intertechnology

RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;

Details

OPA2277UA/2K5E4

Texas Instruments

OPA2277UA/2K5E4 by Texas Instruments is a dual operational amplifier with low-offset and micropower features. It has a max input offset voltage of 100uV, nominal common mode reject ratio of 140dB, and min slew rate of 0.8V/us. Ideal for industrial applications requiring precise signal amplification in compact designs.

Details

FDV303N

Fairchild Semiconductor

N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Transistor Application: SWITCHING; JESD-609 Code: e3;

Details

KSZ9031RNXIA

Microchip Technology

KSZ9031RNXIA by Microchip is a 48-terminal Ethernet transceiver with data rate of 1000 Mbps. Operating temperature range from -40 to 85°C makes it suitable for industrial applications. This square-shaped chip carrier has a very thin profile and matte tin finish, ideal for network interfaces.

Details

LM317T

Motorola

ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: TO-220; Terminal Form: THROUGH-HOLE; No. of Outputs: 1; Package Equivalence Code: SIP3,.1TB;

Details

LL4148GS08

Temic Semiconductors

LL4148GS08 by Temic Semiconductors is a glass diode with a max reverse recovery time of 0.008 us and max forward voltage of 1 V. It is a rectifier diode with a max output current of 0.15 A, ideal for applications requiring fast switching speeds and low power dissipation in electronic circuits.

Details

MMBT3906LT1G

Onsemi

MMBT3906LT1G by Onsemi is a PNP BJT with VCEsat of 0.4V, hFE of 30, and fT of 250MHz. Ideal for small signal applications in electronics due to its low power dissipation, high transition frequency, and compact SOT-23 package. Suitable for use in temperature-sensitive environments with an operating range from -65°C to 150°C.

Details

RC0402FR-0710KL

Yageo

Yageo's RC0402FR-0710KL is a 10000 ohm SMT fixed resistor with 1% tolerance, suitable for applications requiring a rated power dissipation of 0.0625 W. With a temperature coefficient of 100 ppm/°C, it operates b/w -55 to 155 °C, making it ideal for various electronic circuits.

Details

ERJ3EKF1002V

Panasonic

Panasonic's ERJ3EKF1002V is a fixed resistor with 10000 ohm resistance, 1% tolerance, and 0.1 W power dissipation. It operates b/w -55 to 155 °C and is ideal for surface mount applications in automotive electronics due to AEC-Q200 compliance.

Details

BSS138

Vishay Intertechnology

Vishay Intertechnology's BSS138 is a N-CHANNEL FET with SINGLE configuration and ENHANCEMENT MODE operation. It features 0.35W power dissipation, METAL-OXIDE SEMICONDUCTOR tech, and 150°C max temp. Ideal for surface mount applications in various electronic circuits requiring efficient power management.

Details

LM358N

Silicon Group

OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;

Details

LM555CN

Rochester Electronics

PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Shape: RECTANGULAR; Surface Mount: NO; No. of Functions: 1;

Details

LM317T

Analog Devices

ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; No. of Functions: 1; Package Body Material: PLASTIC/EPOXY; Surface Mount: NO;

Details

LL4148

Bkc Semiconductors

RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;

Details

2N2222A

Allegro MicroSystems

NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;

Details

SS14

Rfe International

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

SMBJ18CA

Good-ark Electronics

TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Maximum Repetitive Peak Reverse Voltage: 18 V; Nominal Breakdown Voltage: 21.05 V; Maximum Time At Peak Reflow Temperature (s): 10; JESD-609 Code: e3;

Details

3967 Technical Details

TYPE	DESCRIPTION
Wire Cross Section:	6 mm²
Terminal Gender:	Female
Product Type:	Push-On Terminal
Wire Gauge:	10 AWG

Category Top Products

MSTBA2.5/2-G-5.08

Phoenix Contact

Phoenix Contact's MSTBA2.5/2-G-5.08 is a 250V rated strip terminal block with 12A current rating, ideal for board mounting applications. It holds safety approvals from CB, CSA, CUL, GOST, UL, and VDE making it a reliable choice for various electronic projects requiring a 2-way connector setup.

733-365

Wago

Wago 733-365 is a STRIP TERMINAL BLOCK with 5 ways, rated for 150V and 4A. It uses CONNECTOR fastening method and has safety approvals from ABS, CCA, CSA, DNVGL, EN, IEC. Ideal for BOARD mounting applications in various industries.

35108

TE Connectivity

TE Connectivity 35108 is a UL-approved RING TERMINAL for 10 AWG wire, rated at 300V. With a wire cross section of 6.64 mm2, it's ideal for female terminals in various applications.

1803442

Phoenix Contact

The Phoenix Contact 1803442 is a UL-approved barrier strip terminal block with 160V rated voltage and 8A rated current. It has 4 ways and mounts on a board using a connector fastening method. Ideal for industrial applications requiring secure electrical connections.

1729018

Phoenix Contact

Phoenix Contact 1729018 is a modular terminal block with 2 ways, rated for 13.5A current and 250V voltage. It uses screw fastening method and supports wire gauge up to 16 AWG (1.5 mm²). Ideal for board mounting applications, it holds CSA and UL safety approvals.

MS25036-107

TE Connectivity

RING TERMINAL; Additional Features: NYLON; Wire Gauge: 14 AWG; Voltage (Rated): 300 V; Safety Approval: UL; No. of Ways: 1;

9-160583-5

TE Connectivity

TE Connectivity 9-160583-5 is a UL-approved PUSH-ON TERMINAL for 16 AWG wire, rated at 300V. With a wire cross section of 1.5 mm2, it's ideal for female terminals in various applications.

2-320563-2

TE Connectivity

TE Connectivity 2-320563-2 is a UL-approved RING TERMINAL for 14 AWG wire, rated at 300V. With a wire cross section of 2 mm2, it's ideal for female terminals in various applications.

1777992

Phoenix Contact

Phoenix Contact 1777992 is a BARRIER STRIP TERMINAL BLOCK with 3 ways, rated for 12A current and 320V voltage. It uses SCREW fastening method and accepts wire gauge up to 12 AWG (2.5 mm²). Ideal for industrial applications requiring secure electrical connections.

190030001

Molex

PUSH-ON TERMINAL; Wire Gauge: 18 AWG; Terminal Gender: FEMALE;

619

TE Connectivity

MODULAR TERMINAL BLOCK; Fastening Method: SCREW; Additional Features: NYLON; Wire Gauge: 8 AWG; Voltage (Rated): 300 V; Manufacturer Series: 619;

1217754-1

TE Connectivity

TAB TERMINAL; Terminal Gender: MALE; Safety Approval: UL;

1711026

Phoenix Contact

Phoenix Contact 1711026 is a modular terminal block for BOARD mounting with UL safety approval. It supports wire gauge up to 12 AWG and voltage rating of 250V, ideal for applications requiring a current rating of 24A in a compact design.

890-824/011-000

Wago

BARRIER STRIP TERMINAL BLOCK;

190060013

Molex

PUSH-ON TERMINAL; Wire Gauge: 14 AWG; Manufacturer Series: 19006; Terminal Gender: FEMALE;

1787056

Phoenix Contact

Phoenix Contact 1787056 is a Barrier Strip Terminal Block with 2 rows, 6 ways, and rated voltage of 160V. It has CB, CUL, EAC, UL, VDE safety approvals for applications requiring a current rating of 8A. Ideal for board and panel mounting using connector fastening method.

1751264

Phoenix Contact

The Phoenix Contact 1751264 is a BARRIER STRIP TERMINAL BLOCK with 4 ways, rated for 13.5A current and 200V voltage. It has CB, CCA, CSA safety approvals and uses SCREW fastening method. Ideal for BOARD mounting applications with wire gauge up to 16 AWG and wire cross section of 1.5 mm2.

MSTB2,5/2-ST-5,08

Phoenix Contact

Phoenix Contact's MSTB2,5/2-ST-5,08 is a UL-approved barrier strip terminal block with 2.5mm² wire cross section and 12A rated current. It features screw fastening method for 12 AWG wires at 250V. Ideal for connector mounting applications requiring reliable electrical connections in limited space.

3011

Ntt

LUG TERMINAL; Additional Features: MATERIAL: STEEL; FINISH: TIN;

2-520181-2

TE Connectivity

TE Connectivity 2-520181-2 is a UL-approved PUSH-ON TERMINAL for 18 AWG wire with 600V rating. Featuring FEMALE gender, it suits applications requiring 0.82 mm2 wire cross section in terminals & terminal blocks.