Image shown is a representation only. Exact specifications should be obtained from the product data sheet.

320569

Manufacturer

Tyco Electronics Amp
Manufacturer's Part Number

320569
Description

RING TERMINAL; Additional Features: NYLON; Wire Gauge: 10 AWG; Voltage (Rated): 300 V; No. of Ways: 1; Wire Cross Section: 6.64 mm2;
Datasheet

Datasheet

Not In Stock

Popular Products

BAV99

ROHM

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

2N2222A

General Diode

NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;

Details

CRGCQ0805F10K

TE Connectivity

TE Connectivity's CRGCQ0805F10K is a 10000 ohm fixed resistor with 1% tolerance. It operates b/w -55 to 155 °C and has a power dissipation of 0.125 W. Ideal for surface mount applications in automotive electronics due to AEC-Q200 standard compliance.

Details

SS14

SPC TECHNOLOGY/ MULTICOMP

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

FDLL4148

Onsemi

FDLL4148 by Onsemi is a single rectifier diode with a max reverse recovery time of 0.004 us. With a max forward voltage of 1V and output current of 0.2A, it is ideal for applications requiring fast switching speeds in electronic circuits. The diode's glass package body material and isolated case connection make it suitable for surface mount designs operating at temperatures up to 175°C.

Details

2N2222A

Micro Commercial Components

Small Signal Bipolar Transistors; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; JESD-609 Code: e0;

Details

EEAGA1H4R7

Panasonic

Panasonic EEAGA1H4R7 is a 4.7uF, 50V Aluminum Electrolytic Capacitor with 0.1 Tan Delta and 0.003mA Leakage Current. Ideal for applications requiring high ripple current handling in temperatures ranging from -55 to 105°C.

Details

LL4148

Vishay Intertechnology

Vishay Intertechnology's LL4148 diode features a max reverse recovery time of 0.004 us, forward voltage of 1 V, and output current of 0.15 A. Ideal for rectification applications in electronics due to its high efficiency and low power dissipation capabilities.

Details

2N2222A

Taitron Components

NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; No. of Terminals: 3;

Details

BAV99

Sensitron Semiconductor

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

1N4148WS

Panjit International

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

LM107H/883

National Semiconductor

OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Technology: BIPOLAR;

Details

SMBJ18CA

Fairchild Semiconductor

TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

LM317T

Micro Commercial Components

ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; Moisture Sensitivity Level (MSL): 1; Maximum Output Current-1: 1.5 A; Operating Temperature (TJ-Min): 0 Cel;

Details

SDR0604-101KL

Bourns

SDR0604-101KL by Bourns is a surface mount fixed inductor with a nominal inductance of 100 uH. It is a general purpose inductor suitable for power applications, with a max rated current of 0.52 A and a self-resonance frequency of 9 MHz.

Details

MBRS3200T3G

Onsemi

MBRS3200T3G by Onsemi is a Schottky rectifier diode with a max output current of 3A and a max forward voltage of 0.59V. It operates in temperatures ranging from -65°C to 175°C, making it suitable for power applications. The diode has a peak repetitive reverse voltage of 200V and is designed for surface mount installation in electronic circuits.

Details

SS14

Sangdest Microelectronics (Nanjing)

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

DP83848IVVX/NOPB

National Semiconductor

ETHERNET TRANSCEIVER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 48; Package Code: QFP; Package Shape: SQUARE;

Details

SBAV99LT1G

Onsemi

SBAV99LT1G by Onsemi is a rectifier diode with a max repetitive peak reverse voltage of 100V. It has a small outline package style and a fast max reverse recovery time of 0.006 us. It is commonly used in applications requiring low power dissipation and high operating temperatures.

Details

1N4148

Silicon Standard

RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;

Details

320569 Technical Details

TYPE	DESCRIPTION
Total Ways:	1
Wire Cross Section:	6.64 mm²
Product Type:	Ring Terminal
Safety Compliance:	UL
Additional Features:	Nylon
Wire Gauge:	10 AWG
Rated Voltage:	300 V

Category Top Products

D-436-38-COLD

TE Connectivity

BUTT TERMINAL; Mounting Type: CABLE; Wire Gauge: 12 AWG; Safety Approval: UL; Wire Cross Section: 2.94 mm2;

32957

Tyco Electronics Amp

RING TERMINAL; Wire Gauge: 16 AWG; Voltage (Rated): 600 V; Safety Approval: UL; Wire Cross Section: 2 mm2; Terminal Gender: FEMALE;

4-520448-2

TE Connectivity

TE Connectivity 4-520448-2 is a UL-approved PUSH-ON TERMINAL for 10 AWG wire, rated at 600V. With a wire cross section of 5.26 mm2, it's ideal for applications requiring FEMALE terminals in various industries.

1711725

Phoenix Contact

Phoenix Contact 1711725 is a BARRIER STRIP TERMINAL BLOCK with 2.5 mm2 Wire Cross Section and 24 A Rated Current. It has a Mounting Type of BOARD and Safety Approvals from CB, CSA, UL, etc. Ideal for applications requiring secure wire connections at up to 400 V voltage levels.

1374

Advanced Interconnections

PCB TERMINAL; Terminal Gender: FEMALE;

350537-6

Tyco Electronics Amp

WIRE TERMINAL; Wire Gauge: 14 AWG; Wire Cross Section: 2 mm2; Manufacturer Series: 350537; Terminal Gender: FEMALE;

165565-1

Tyco Electronics Amp

PUSH-ON TERMINAL; Additional Features: NYLON; Wire Gauge: 16 AWG; Voltage (Rated): 300 V; Safety Approval: UL; Terminal Gender: FEMALE;

3044089

Phoenix Contact

The Phoenix Contact 3044089 is a modular terminal block with 2 rows and DIN rail mounting. It has a rated voltage of 1000V, wire gauge of 12 AWG, and can handle a current of 24A. It is commonly used in electrical applications for secure and efficient wire connections.

282834-3

TE Connectivity

TE Connectivity 282834-3 is a modular terminal block with UL safety approval. It supports 16 AWG wire gauge, rated at 150V and 10A current. Ideal for board mounting applications requiring a fastening screw method, accommodating up to 3 ways with wire cross section of 1.3 mm2.

2002-3211/1000-410

Wago

MODULAR TERMINAL BLOCK;

190190025

Molex

PUSH-ON TERMINAL; Wire Gauge: 14 AWG; Terminal Gender: FEMALE; Manufacturer Series: 19019; Wire Cross Section: 2.5 mm2;

7701

Keystone Electronics

POWER TERMINAL; Wire Gauge: 14 AWG;

1905010

Phoenix Contact

BARRIER STRIP TERMINAL BLOCK; Mounting Type: BOARD; Fastening Method: SPRING LOADED; Voltage (Rated): 400 V; No. of Decks: 1; No. of Ways: 1;

2022-112/000-037

Wago

BARRIER STRIP TERMINAL BLOCK;

1731734

Phoenix Contact

Phoenix Contact 1731734 is a UL-approved barrier strip terminal block with 3 ways, rated for 24A current and 500V voltage. It accommodates wire gauge up to 12 AWG and wire cross-section of 2.5mm², mounted on board using screw fastening method. Ideal for industrial applications requiring secure electrical connections.

160864-2

TE Connectivity

TE Connectivity 160864-2 is a UL-approved PUSH-ON TERMINAL for 17 AWG wire, rated at 250V. With a wire cross section of 1.03 mm2, this FEMALE terminal block is ideal for various electrical applications.

1776263-5

TE Connectivity

TE Connectivity 1776263-5 is a UL-approved barrier strip terminal block with 5 ways, rated for 10A current and 300V voltage. It supports wire gauge up to 16 AWG (1.4 mm2) and uses screw fastening method. Ideal for board mounting applications in various industries.

1777989

Phoenix Contact

Phoenix Contact 1777989 is a BARRIER STRIP TERMINAL BLOCK with 2.5 mm2 wire cross section, rated for 12A current and 320V voltage. It has CB, CSA, CUL, DNVGL, EAC, RS safety approvals and uses SCREW fastening method. Ideal for connecting 12 AWG wires in various electrical applications.

236-402

Wago

The Wago 236-402 is a STRIP TERMINAL BLOCK for BOARD mounting, rated at 300V/15A. It supports wire gauge up to 12 AWG with wire cross section of 2.5 mm². Ideal for applications requiring CSA/UL safety approvals and fastening via SOLDER method in circuits with two ways.

282834-8

TE Connectivity

TE Connectivity 282834-8 is a modular terminal block with 8 ways, rated for 10A current and 150V voltage. It uses screw fastening method, supports wire gauge up to 16 AWG, and has UL safety approval. Ideal for board mounting applications requiring terminals with wire cross section of 1.3 mm2.