Image shown is a representation only. Exact specifications should be obtained from the product data sheet.

TMCS1100A3QDR

Manufacturer

Texas Instruments
Manufacturer's Part Number

TMCS1100A3QDR
Description

CURRENT SENSOR; Mounting Feature: SURFACE MOUNT; No. of Terminals: 8; Output Type: ANALOG VOLTAGE; Package Shape or Style: RECTANGULAR; Body Width: 3.895 inch;
Datasheet

Datasheet

Not In Stock

Popular Products

LM358AN

NXP Semiconductors

OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;

Details

BAV99

Taiwan Semiconductor

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

SMBJ18CA

Onsemi

TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

INA826AIDGKR

Texas Instruments

INA826AIDGKR by Texas Instruments is an instrumentation amplifier with 150uV max input offset voltage, 0.095uA max average bias current, and 1MHz nominal bandwidth. Ideal for automotive applications due to its -40 to 125 °C operating temperature range and high common mode rejection ratio of 120dB.

Details

BSS138

Good-ark Electronics

N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain-Source On Resistance: 6 ohm; Minimum DS Breakdown Voltage: 50 V; Operating Mode: ENHANCEMENT MODE;

Details

LM358DR2G

Onsemi

LM358DR2G by Onsemi is a dual operational amplifier with 7000uV max input offset voltage and 70dB nominal CMRR. Ideal for applications requiring low bias current such as sensor interfaces, signal conditioning circuits, and audio amplifiers. Package style: Small Outline, Technology: Bipolar, Unity Gain Bandwidth: 1000 kHz.

Details

LM555CM

Harris Semiconductor

Analog Waveform Generation Functions; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;

Details

BSS138PS,115

NXP Semiconductors

NXP Semiconductors' BSS138PS,115 is a N-CHANNEL FET with 60V DS breakdown voltage and 0.32A max drain current. Ideal for switching applications, it features a 1.6 ohm max on-resistance and operates in enhancement mode. The transistor comes in a small outline package with GULL WING terminals, making it suitable for surface mount designs.

Details

LM107H

Raytheon Semiconductor

OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Low-Offset: NO;

Details

1N4148

Sun Wai Electronic

RECTIFIER DIODE; Surface Mount: NO; Maximum Output Current: .15 A; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Reverse Recovery Time: .004 us; Maximum Repetitive Peak Reverse Voltage: 100 V;

Details

ULN2803A

Vishay Intertechnology

NPN; Configuration: COMPLEX; Surface Mount: NO; Maximum Collector Current (IC): .5 A; Package Body Material: PLASTIC/EPOXY; JESD-30 Code: R-PDIP-T18;

Details

1N4148W-7-F

Multicomp Pro

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

RC0402FR-071KL

Yageo

The Yageo RC0402FR-071KL is a fixed resistor with a resistance of 1000 ohm and a tolerance of 1%. It is suitable for surface mount applications and has a max operating temperature of 155 °C.

Details

NDT2955

Fairchild Semiconductor

P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 3 W; Package Style (Meter): SMALL OUTLINE; Maximum Drain Current (Abs) (ID): 2.5 A;

Details

EU2B-YS3203C

Idec

ROTARY SWITCH;

Details

BSS138W-7-F

Diodes Incorporated

Diodes Inc.'s BSS138W-7-F is a N-channel FET with 50V DS breakdown voltage, ideal for switching applications. It features single configuration with built-in diode, Gull Wing terminals, and operates in enhancement mode. With 0.2A max drain current and 3.5 ohm RDS(on), it's UL recognized and suitable for small outline packages at temperatures ranging from -55 to 150°C.

Details

2N2222A

Space Power Electronics

NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;

Details

2N7002

Unisonic Technologies

N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Package Body Material: PLASTIC/EPOXY; Package Shape: RECTANGULAR;

Details

NE555D

Fairchild Semiconductor

PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;

Details

FDC5614P

Fairchild Semiconductor

P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 1.6 W; Transistor Application: SWITCHING; Maximum Drain Current (ID): 3 A;

Details

TMCS1100A3QDR Technical Details

TYPE	DESCRIPTION
Minimum Supply Voltage:	3 V
Package Body Material:	PLASTIC/EPOXY
Maximum Supply Voltage:	5.5 V
Output Type:	ANALOG VOLTAGE
Terminal Finish:	MATTE TIN
Minimum Operating Temperature:	-40 Cel
Mounting Feature:	SURFACE MOUNT
Body Width:	3.895 inch
Sensors or Transducers Type:	CURRENT SENSOR
No. of Terminals:	8
Package Equivalence Code:	SOP8,.23
Package Shape or Style:	RECTANGULAR
Body Height:	1.75 mm
Body Length/Diameter:	4.905 mm
Maximum Operating Temperature:	125 Cel

Category Top Products

HTFS400-P

Lem International Sa

CURRENT SENSOR;

KTY83/122T/R

NXP Semiconductors

NXP Semiconductors' KTY83/122T/R is a 2-terminal sensor with temp coef of +ppm/°C, operating from -55 to 175 °C. Its PLASTIC/EPOXY package makes it ideal for through-hole mounting in various applications like temperature monitoring systems.

ACS711KEXLT-31AB-T

Allegro MicroSystems

ACS711KEXLT-31AB-T by Allegro MicroSystems is a current sensor with 12 terminals, operating b/w -40°C to 125°C. It has an analog voltage output, requires 3-5.5V supply voltage, and comes in a square package style. Ideal for surface mount applications in various industries.

BHI260AP

Bosch Rexroth Ag

ACCELEROMETER/GYROSCOPE; Mounting Feature: SURFACE MOUNT; Output Type: DIGITAL VOLTAGE; Package Shape or Style: RECTANGULAR; Package Body Material: UNSPECIFIED; Additional Features: IT OPERATES AT 1.8 SUPPLY VOLTAGE;

AWM43300V

Honeywell Sensing And Control

Honeywell Sensing And Control AWM43300V is a MASS AIR FLOW SENSOR with 3 terminals, operating voltage range of 8-15 V. It offers analog voltage output, suitable for applications requiring precise airflow measurement in temperatures ranging from -25 to 85°C. The sensor's rectangular shape and through-hole mounting feature make it versatile for various industrial uses.

ACS72981LLRATR-100B5

Allegro MicroSystems

Allegro MicroSystems' ACS72981LLRATR-100B5 is a current sensor with 7 terminals, operating b/w -40 to 150°C. It offers analog voltage output, suitable for automotive applications due to AEC-Q100 screening and BICMOS technology. The sensor has a package size of 6.4mm x 4.8mm x 1.5mm and can operate within a supply voltage range of 4.5V to 5.5V.

MAX32664GTGC+

Maxim Integrated

SENSOR/TRANSDUCER CIRCUIT; Terminal Finish: MATTE TIN;

HLSR10-P/SP33

Lem International Sa

Other Sensors/Transducers;

CCT323047-100-16-02

TDK

CURRENT SENSOR;

EKMC1601113

Panasonic

Panasonic EKMC1601113 is a motion sensor with 3 terminals, operating voltage range of 3-6V. It offers digital current output and operates b/w -20 to 60°C. Ideal for applications requiring motion detection in a compact cylindrical package.

FX293X-100A-0050-L

TE Connectivity

TE Connectivity's FX293X-100A-0050-L is a force sensor with 4.75V to 5V supply voltage range, providing analog voltage output up to 4V. With a round shape and 19.7mm diameter, it operates b/w 0°C to 50°C, ideal for applications requiring precise force measurement in various industries.

Q45BB6FQ5

Hans Turck & Kg

Q45BB6FQ5 by Hans Turck & Kg is a fiber optic sensor with a max supply voltage of 30V and a min supply voltage of 10V. It has an output type of NPN, PNP and can operate in temperatures ranging from -40°C to 70°C. This sensor is commonly used in various applications requiring precise optical sensing capabilities.

BNO055

Robert Bosch

BNO055 by Robert Bosch is a 3.8" wide ACCELEROMETER with 28 terminals, operating b/w -40 to 85°C. It offers digital voltage output ranging from 0.5-2V, suitable for surface mount applications in various industries like automotive and robotics.

ACS732KLATR-40AB-T

Allegro MicroSystems

ACS732KLATR-40AB-T by Allegro MicroSystems is a current sensor with 16 terminals, operating from -40 to 125°C. It provides an analog voltage output through open-drain configuration and supports supply voltages ranging from 4.75V to 5.25V. This rectangular surface-mount sensor is ideal for automotive applications due to its AEC-Q100 screening level and plastic/epoxy package material.

ESTHD50VM

Carlo Gavazzi Holding Ag

Carlo Gavazzi's ESTHD50VM is a humidity sensor with 2% accuracy, 0-10V analog output, and -40 to 100°C operating range. Ideal for duct mounting applications in various industries due to its PC-110 body material and voltage supply of 8-35V.

LF2005-S

Lem International Sa

Other Sensors/Transducers;

FX1901-0001-0025-L

TE Connectivity

LIQUID LEVEL SENSOR; Minimum Operating Temperature: 0 Cel; Maximum Supply Voltage: 5 V; Maximum Operating Temperature: 50 Cel; Maximum Accuracy (%): 1;

ACS723KMATR-40AB-T

Allegro MicroSystems

Allegro MicroSystems' ACS723KMATR-40AB-T is a current sensor with 2% accuracy, outputting analog voltage in the range of 0.5-4.5V. Operating b/w -40 to 125°C, it has a supply voltage range of 4.5-5.5V and comes in a rectangular surface-mount package suitable for various applications requiring precise current measurements.

TMCS1107A2BQDRQ1

Texas Instruments

TMCS1107A2BQDRQ1 by Texas Instruments is a current sensor with 8 terminals, operating voltage range of 3-5.5V, and AEC-Q100 screening for automotive applications. It offers analog voltage output, operates b/w -40 to 125°C, and features surface mounting for easy installation in various systems.

HAFBLF0050CAAX5

Honeywell Sensing And Control

Honeywell Sensing And Control's HAFBLF0050CAAX5 is a MASS AIR FLOW SENSOR with 4 terminals, operating b/w -20 to 70°C. It has an analog voltage output, rectangular package style, and requires a supply voltage of 4.5-5.5V. Ideal for applications requiring precise air flow measurement in compact spaces.