Image shown is a representation only. Exact specifications should be obtained from the product data sheet.

HY10-P

Manufacturer

Lem International Sa
Manufacturer's Part Number

HY10-P
Description

CURRENT SENSOR; Mounting Feature: THROUGH HOLE MOUNT; Output Type: ANALOG VOLTAGE; Package Shape or Style: RECTANGULAR; Output Range: -4-4V; Maximum Operating Temperature: 80 Cel;
Datasheet

Datasheet

Not In Stock

Popular Products

2N2222A

ROHM

NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .6 A;

Details

1N4148

Nexperia

RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;

Details

SMBJ18CA

Zowie Technology

TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

1N4148WS

Vishay Intertechnology

Vishay Intertechnology's 1N4148WS is a single rectifier diode with a max forward voltage of 1V and output current of 0.15A. With a fast reverse recovery time of 0.004us, it operates up to 150°C. Ideal for applications requiring high-speed switching and low power consumption in surface mount configurations.

Details

LL4148

Daco Semiconductor

RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;

Details

SMBJ18CA

Lite-on Semiconductor

TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

FT232RL-REEL

FTDI

FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.

Details

1N4148WS

Good-ark Electronics

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

LL4148

Sinyork

RECTIFIER DIODE; Surface Mount: YES; Config: SINGLE; No. of Phases: 1; No. of Elements: 1; Maximum Repetitive Peak Reverse Voltage: 100 V;

Details

1N4148WS

Yangzhou Yangjie Electronics

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

1N4148WT

Eic Semiconductor

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

1N4148

Vicor

RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;

Details

LM358DT

ROHM

OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: LSOP; Package Shape: RECTANGULAR;

Details

BAV99

Sprague Electric

RECTIFIER DIODE; Surface Mount: YES; Maximum Forward Voltage (VF): 1.3 V; Maximum Output Current: .1 A; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Operating Temperature: 175 Cel;

Details

1N4148

Onsemi

RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;

Details

LL4148

Taitron Components

RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;

Details

2N2222A

Ksl Microdevices

NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;

Details

LM358AN

National Semiconductor

OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;

Details

LM358AN

STMicroelectronics

OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;

Details

BAV99

Plessey Semiconductors Discrete Components Div

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

HY10-P Technical Details

TYPE	DESCRIPTION
Minimum Supply Voltage:	14.25 V
Other Names:	Q6022726 HY 10-P-ND 64.73.13.000.0 398-1109 HY10P
Maximum Operating Current:	10 mA
Maximum Supply Voltage:	15.75 V
Output Range:	-4-4V
Output Type:	ANALOG VOLTAGE
Housing:	PLASTIC
Minimum Operating Temperature:	-10 Cel
Mounting Feature:	THROUGH HOLE MOUNT
Body Width:	12 inch
Sensors or Transducers Type:	CURRENT SENSOR
Package Shape or Style:	RECTANGULAR
Termination Type:	SOLDER
Body Height:	23 mm
Body Length/Diameter:	36 mm
Maximum Operating Temperature:	80 Cel

Category Top Products

LF210-S

Lem International Sa

Other Sensors/Transducers;

SCHA63T-K03

Murata Manufacturing

Murata's SCHA63T-K03 is a MEMS accelerometer/gyroscope with 32 terminals, operating voltage range of 3-3.6V, and digital output. It has a compact rectangular shape (18.65mm x 4.2mm) for surface mount applications in various industries like automotive and consumer electronics due to its wide temperature range (-40°C to 110°C).

HMSR15-SMS

Lem International Sa

HMSR15-SMS by Lem International Sa is a current sensor with voltage output. It operates b/w -40 to 125°C, with supply voltage range of 4.5-5.5V. This rectangular sensor has 10 terminals and is ideal for surface mount applications.

HAFBSF0200C2AX3

Honeywell Sensing And Control

Honeywell Sensing And Control's HAFBSF0200C2AX3 is a MASS AIR FLOW SENSOR with 4 terminals. It operates b/w -20 to 70 °C, providing digital voltage output. With a max accuracy of 0.25%, it has a rectangular shape and is ideal for board mounting applications.

HX50-P/SP2

Lem International Sa

The Lem International Sa HX50-P/SP2 is a plastic current sensor with 6 terminals, operating voltage range of 11.4-15.75V, and outputting analog voltage. Ideal for applications requiring precise current measurement in temperatures ranging from -25 to 85°C.

ACS755KCB-150-PSF

Allegro MicroSystems

Allegro MicroSystems' ACS755KCB-150-PSF is a BICMOS tech sensor with 5V power supply, 10mA max current, and -40 to 125°C temp range. Ideal for applications requiring single-ended output circuit sensors in plastic/epoxy packages.

TMCS1108A2BQDT

Texas Instruments

TMCS1108A2BQDT by Texas Instruments is a current sensor with 8 terminals. It operates b/w -40°C to 85°C, producing analog voltage output. With a supply voltage range of 3V to 5V, it is ideal for surface mount applications in various industries.

CSLA1CD

Honeywell Sensing And Control

CURRENT SENSOR;

HPP801A031

TE Connectivity

LIQUID LEVEL SENSOR; Output Type: ANALOG OUTPUT; Minimum Operating Temperature: -60 Cel; Maximum Operating Temperature: 140 Cel; Maximum Supply Voltage: 10 V;

TMCS1101A1BQDR

Texas Instruments

TMCS1101A1BQDR by Texas Instruments is a current sensor with 8 terminals. It operates b/w -40 to 125°C, providing analog voltage output. With a supply voltage range of 3-5.5V, it is ideal for surface mount applications in various industries.

IVT-S-300-U3-I-CAN2-12/24

Isabellenhuette Heusler & Kg

CURRENT SENSOR;

LA25-NP/SP14

Lem International Sa

CURRENT SENSOR;

BMI085

Robert Bosch

BMI085 by Robert Bosch is a 3-axis accelerometer/gyroscope sensor with output range of 0.69-2.4V. It operates b/w -40 to 85°C, suitable for various applications like motion tracking in wearables and drones due to its compact size (4.5mm x 3 inch x 0.82 mm) and digital voltage output type.

FX1901-0001-0200-L

TE Connectivity

FORCE SENSOR; Maximum Supply Voltage: 5 V; Maximum Accuracy (%): 1; Minimum Operating Temperature: 0 Cel; Maximum Operating Temperature: 50 Cel;

HX10-P

Lem International Sa

HX10-P by Lem International Sa is a current sensor with 6 terminals, outputting -4-4V analog voltage. It operates b/w -25 to 85°C, suitable for applications requiring precise current measurement in a compact package. With plastic housing and through-hole mounting feature, it offers reliable performance at supply voltages ranging from 14.25 to 15.75V.

ACS730LLCTR-20AB-T

Allegro MicroSystems

ACS730LLCTR-20AB-T by Allegro MicroSystems is a current sensor with a supply voltage range of 4.5V to 5.5V and an output range of 0.20-4.60V. It is commonly used in automotive applications due to its AEC-Q100 screening level and surface mounting feature.

5962R8757104VXA

Analog Devices

Analog Devices' 5962R8757104VXA is a ceramic-packaged sensor with 5V power supply, operating from -55°C to 125°C. It has 2 terminals and meets screening levels of 38535V, 38534K, and 883S. Ideal for surface mount applications in various industries requiring precise temperature monitoring.

ACS37002LMABTR-050B3

Allegro MicroSystems

ACS37002LMABTR-050B3 by Allegro MicroSystems is a current sensor with 16 terminals, operating voltage range of 3.15V to 3.6V, and output voltage range of 0.3-3.0V. It is designed for automotive applications requiring precise current measurements in a compact rectangular package suitable for surface mounting.

20009605-23

TE Connectivity

TE Connectivity's 20009605-23 force sensor operates at 2.7-3V, with a round shape and digital output. Ideal for applications requiring force measurement in temperatures ranging from 0 to 50°C.

A1363LKTTN-5-T

Allegro MicroSystems

CURRENT SENSOR; Terminal Finish: MATTE TIN;