Image shown is a representation only. Exact specifications should be obtained from the product data sheet.

TCAN330DR

Manufacturer

Texas Instruments
Manufacturer's Part Number

TCAN330DR
Description

INTERFACE CIRCUIT; Temperature Grade: AUTOMOTIVE; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
Datasheet

Datasheet

Not In Stock

Popular Products

1N4148WT

Surge Components

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

LM358M

Texas Instruments

LM358M by Texas Instruments is an Operational Amplifier with 2 functions, featuring a max input offset voltage of 9000 uV and a nominal voltage of 5 V. It is commonly used in applications requiring high common mode rejection ratio and low bias current, such as sensor interfaces and signal conditioning circuits.

Details

BAV99

Vishay Telefunken

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

BAV99

Secos

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

SMBJ18CA

Bytesonic Electronics

TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

1552200168

Molex

WIRE AND CABLE;

Details

1N4148WS

Formosa Microsemi

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

2N2222A

Fairchild Semiconductor

NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;

Details

LL4148

General Semiconductor

RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;

Details

BSS123,215

Nexperia

N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Moisture Sensitivity Level (MSL): 1; No. of Terminals: 3; Maximum Time At Peak Reflow Temperature (s): 30;

Details

2N7002

Formosa Microsemi

N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .225 W; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR; Maximum Drain Current (Abs) (ID): .115 A;

Details

BAV99

Infineon Technologies

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

MBR0530T1G

Onsemi

MBR0530T1G by Onsemi is a Schottky rectifier diode with a max forward voltage of 0.375V and output current of 0.5A. It operates b/w -65°C to 125°C, making it suitable for applications requiring high-speed switching in compact electronic devices like smartphones and tablets. The package style is small outline with gull wing terminals for surface mount assembly.

Details

MMBT2907ALT1G

Rochester Electronics

PNP; Configuration: SINGLE; Surface Mount: YES; Nominal Transition Frequency (fT): 200 MHz; Maximum Collector Current (IC): .6 A; Terminal Form: GULL WING;

Details

SS14

Leshan Radio

RECTIFIER DIODE; Surface Mount: YES; Config: SINGLE; No. of Phases: 1; No. of Elements: 1; Maximum Forward Voltage (VF): .5 V;

Details

BAV99

Formosa Microsemi

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

1N4148

Gulf Semiconductor

RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;

Details

2N2222A

Space Power Electronics

NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;

Details

BSS138LT3G

Onsemi

BSS138LT3G by Onsemi is a N-CHANNEL FET with a min DS breakdown voltage of 50V. It is used for switching applications and has a max drain current of 0.2A and max drain-source on resistance of 3.5 ohm.

Details

BSS138

National Semiconductor

N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Maximum Feedback Capacitance (Crss): 10 pF; JEDEC-95 Code: TO-236AB;

Details

TCAN330DR Technical Details

TYPE	DESCRIPTION
Package Body Material:	PLASTIC/EPOXY
Nominal Supply Voltage:	3.3 V
Maximum Time At Peak Reflow Temperature (s):	30
Maximum Seated Height:	1.75 mm
Surface Mount:	YES
Terminal Finish:	NICKEL PALLADIUM GOLD
No. of Terminals:	8
Terminal Position:	DUAL
Package Style (Meter):	SMALL OUTLINE
Data Rate:	1 Mbps
JESD-30 Code:	R-PDSO-G8
Package Shape:	RECTANGULAR
Terminal Form:	GULL WING
Maximum Operating Temperature:	125 Cel
No. of Channels:	1
Package Code:	SOP
Width:	3.9 mm
Moisture Sensitivity Level (MSL):	1
Telecom IC Type:	INTERFACE CIRCUIT
JESD-609 Code:	e4
Minimum Operating Temperature:	-40 Cel
No. of Functions:	1
Length:	4.9 mm
Peak Reflow Temperature (C):	260
Terminal Pitch:	1.27 mm
Temperature Grade:	AUTOMOTIVE

Category Top Products

LAN8740AI-EN

Microchip Technology

LAN8740AI-EN by Microchip Technology is an Ethernet transceiver with 100 Mbps data rate. It operates in industrial temperature range (-40 to 85 °C) and has a supply voltage of 1.2 V. This network interface, with 32 terminals in a square chip carrier package, is ideal for telecom applications requiring high-speed connectivity.

TJA1050T/CM,118

NXP Semiconductors

TJA1050T/CM,118 by NXP Semiconductors is a network interface IC with 1 transceiver. It operates at a data rate of 1 Mbps and has a nominal voltage of 5V. This small outline package is commonly used in automotive applications.

MCP2542FDT-H/MF

Microchip Technology

MCP2542FDT-H/MF by Microchip is a CAN FD transceiver with 8 Mbps data rate, suitable for automotive applications. It operates at -40 to 150°C, with a supply voltage of 5V and max current of 140mA. The package is small outline, heat sink, very thin profile square shape with matte tin finish and dual terminals.

KSZ8851-16MLLI

Microchip Technology

KSZ8851-16MLLI by Microchip: Ethernet transceiver with 48 terminals, operates at -40 to 85°C. Package style is flatpack, low profile, fine pitch for industrial applications. Features include CMOS technology, matte tin finish, and 1.8V supply voltage.

LTC2875IDD#PBF

Analog Devices

LTC2875IDD#PBF by Analog Devices is a BICMOS technology interface circuit with 8 terminals, operating b/w -40 to 85°C. It has a small outline package style and matte tin terminal finish, suitable for telecom applications requiring a nominal voltage of 3.3V.

KSZ8794CNXIC

Micrel

ETHERNET TRANSCEIVER; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 64; Package Code: HQCCN; Package Shape: SQUARE;

SN65HVD234DR

Texas Instruments

SN65HVD234DR by Texas Instruments is an 8-terminal interface circuit with a data rate of 1 Mbps. Operating temperature ranges from -40 to 125 °C, making it ideal for automotive applications. With a supply voltage of 3.3 V and low current draw of 6 mA, it's suitable for network interfaces in compact designs.

88E1111-B2-BAB1C000

Marvell Technology

Marvell's 88E1111-B2-BAB1C000 is a CMOS Ethernet transceiver with 117 terminals in a low-profile grid array package. It operates at a nominal voltage of 1V and has a terminal pitch of 1mm. Ideal for network interfaces, this component is designed for surface mount applications with dimensions of 10mm x 14mm.

MCP2561FDT-E/SN

Microchip Technology

MCP2561FDT-E/SN by Microchip is a CAN FD transceiver with 8 Mbps data rate, suitable for automotive applications. It operates at -40 to 125°C, with 70 mA supply current and 5V nominal voltage. The small outline package has dual terminals, matte tin finish, and measures 4.9mm x 3.9mm x 1.75mm in size.

TJA1052IT/5

NXP Semiconductors

NXP Semiconductors' TJA1052IT/5 is a 16-terminal interface circuit with 1 Mbps data rate, suitable for automotive applications. It operates at temperatures ranging from -40 to 125°C and has a supply voltage of 5V. The package style is small outline, making it ideal for surface mount designs in automotive networks.

KSZ8993MI

Micrel

LAN SWITCHING CIRCUIT; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 128; Package Code: FQFP; Package Shape: RECTANGULAR;

RTL8211FSI-VS-CG

Realtek Semiconductor

Realtek's RTL8211FSI-VS-CG is a 48-terminal Ethernet transceiver with a data rate of 1000 Mbps. It operates b/w -40°C to 85°C, making it suitable for various network interface applications. The chip carrier package style with a very thin profile and no-lead terminal form enables surface mount installation in compact spaces.

SN65HVD234QDRQ1

Texas Instruments

SN65HVD234QDRQ1 by Texas Instruments is an AEC-Q100 compliant network interface IC with 8 terminals. It operates at -40 to 125°C, supporting a data rate of 1 Mbps at a supply voltage of 3.3V. Ideal for automotive applications requiring robust communication in harsh environments.

DP83848QSQ/NOPB

Texas Instruments

DP83848QSQ/NOPB by Texas Instruments is an Ethernet transceiver with 100Mbps data rate, operating at 3.3V. It features a CMOS technology, industrial temperature grade, and quad terminal position for surface mount applications in network interfaces.

ATA6561-GBQW

Atmel

ETHERNET TRANSCEIVER; Terminal Form: NO LEAD; No. of Terminals: 8; Package Code: HVSON; Package Shape: SQUARE; Width: 3 mm;

SN65HVD233SJD

Texas Instruments

SN65HVD233SJD by Texas Instruments is a military-grade interface circuit with 1 Mbps data rate and 3.3V nominal voltage. It features a ceramic, metal-sealed co-fired package body material and operates in temperatures ranging from -55 to 210°C. Ideal for network interfaces requiring low power consumption and high reliability in harsh environments.

ATA6563-GAQW0

Microchip Technology

ATA6563-GAQW0 by Microchip Tech is a CAN transceiver with 5 Mbps data rate, AEC-Q100 screening, and 8 terminals. Ideal for automotive applications due to its -40 to 150 °C operating temp range and small outline package style. Offers high reliability with TS 16949 certification and gull wing terminal form.

LTC2875HDD#TRPBF

Linear Technology

INTERFACE CIRCUIT; Temperature Grade: AUTOMOTIVE; Terminal Form: NO LEAD; No. of Terminals: 8; Package Code: HVSON; Package Shape: SQUARE;

ISO1042DWVR

Texas Instruments

ISO1042DWVR by Texas Instruments is a network interface IC with 8 terminals and a small outline package style. It operates at temperatures ranging from -40 to 125 °C and has a nominal voltage of 5V. This IC is commonly used in automotive applications for interface circuits.

TCAN1044VDDFRQ1

Texas Instruments

TCAN1044VDDFRQ1 by Texas Instruments is an AEC-Q100 compliant CAN FD transceiver with 8 Mbps data rate, suitable for automotive applications. It operates at -40 to 125°C, with a supply voltage of 5V and max current of 130mA. The package is small outline, thin profile, with gull wing terminals and nickel palladium gold finish.