Image shown is a representation only. Exact specifications should be obtained from the product data sheet.

KSZ9031RNXIA-TR

Manufacturer

Microchip Technology
Manufacturer's Part Number

KSZ9031RNXIA-TR
Description

ETHERNET TRANSCEIVER; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 48; Package Code: HVQCCN; Package Shape: SQUARE;
Datasheet

Datasheet

Not In Stock

Popular Products

2N2222A

Philips Semiconductors

NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;

Details

LM107H

Linear Technology

LM107H by Linear Technology is an Operational Amplifier with a max input offset voltage of 3000uV, common mode reject ratio of 96dB, and min voltage gain of 50000. It is used in military applications due to its MILITARY temperature grade and BIPOLAR technology for precise signal processing in harsh environments.

Details

2N7002

Vishay Intertechnology

2N7002 by Vishay Intertechnology is a N-CHANNEL FET with 60V DS Breakdown Voltage, 0.115A Drain Current, and 7.5 ohm On Resistance. Ideal for SWITCHING applications due to its SINGLE configuration with BUILT-IN DIODE. Operates in ENHANCEMENT MODE, suitable for surface mount with GULL WING terminals.

Details

DS18B20U+

Analog Devices

DS18B20U+ by Analog Devices is a 12-bit temperature sensor with 1-Wire interface. It operates b/w -55 to 125°C, offering ±0.5°C accuracy. Suitable for applications requiring digital output and surface mounting feature.

Details

LL4148

Itt Components

RECTIFIER DIODE; Surface Mount: YES; Maximum Reverse Recovery Time: .005 us; Config: SINGLE; Maximum Operating Temperature: 200 Cel; Maximum Non Repetitive Peak Forward Current: 1 A;

Details

1N4148WT

Diodes Incorporated

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

STM8S003F3P6TR

STMicroelectronics

STM8S003F3P6TR by STMicroelectronics is an 8-bit microcontroller with a max clock frequency of 16 MHz. It features 1024 RAM bytes, 128 data EEPROM size, and 5-ch 10-bit ADC channels. Ideal for industrial applications requiring low power mode and connectivity via I2C, SPI, and UART interfaces.

Details

SMBJ18CA

Forward International Electronics

TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Nominal Breakdown Voltage: 21.05 V; Maximum Clamping Voltage: 29.2 V; Maximum Repetitive Peak Reverse Voltage: 18 V; Polarity: BIDIRECTIONAL;

Details

MBR130T1G

Onsemi

MBR130T1G by Onsemi is a Schottky rectifier diode with max output current of 1A and max repetitive peak reverse voltage of 30V. It operates b/w -65 to 125°C, suitable for surface mount applications in electronics requiring low forward voltage drop.

Details

BAV99

Vishay Sprague

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

NE555D

NXP Semiconductors

SQUARE; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: LSOP; Package Shape: RECTANGULAR; Surface Mount: YES;

Details

LL4148

Bkc Semiconductors

RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;

Details

SZNUP2105LT1G

Onsemi

SZNUP2105LT1G by Onsemi is a Transient Suppression Device with 2 elements in a common anode configuration. It has a max non-repetitive peak reverse power dissipation of 350W and breakdown voltage of 29.1V. Ideal for applications requiring bidirectional polarity protection, such as automotive electronics and industrial equipment due to its AEC-Q101 compliance and high clamping voltage of 44V.

Details

ULN2803A

Motorola

NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; Terminal Position: DUAL; JESD-30 Code: R-PDIP-T18;

Details

1N4148

Weitron Technology

RECTIFIER DIODE; Surface Mount: NO; Maximum Reverse Recovery Time: .004 us; Config: SINGLE; Maximum Output Current: .15 A; Terminal Finish: Tin/Lead (Sn/Pb);

Details

AT90CAN128-16AUR

Microchip Technology

AT90CAN128-16AUR by Microchip: 16 MHz clock, 8-bit data RAM, and 131072 ROM words. Ideal for industrial applications with CAN, SPI, TWI connectivity and low power mode. Contains 4 timers, 8 ADC channels, and supports up to 10-bit analog to digital conversion.

Details

MMBT2907ALT1G

Rochester Electronics

PNP; Configuration: SINGLE; Surface Mount: YES; Nominal Transition Frequency (fT): 200 MHz; Maximum Collector Current (IC): .6 A; Terminal Form: GULL WING;

Details

1N4148

Philips Components

RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;

Details

LL4148

Taiwan Semiconductor

RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;

Details

SMBJ18CA

Vishay Semiconductors

TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: J BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

KSZ9031RNXIA-TR Technical Details

TYPE	DESCRIPTION
Package Body Material:	UNSPECIFIED
Nominal Supply Voltage:	1.2 V
Maximum Time At Peak Reflow Temperature (s):	30
Maximum Seated Height:	.9 mm
Surface Mount:	YES
Terminal Finish:	MATTE TIN
No. of Terminals:	48
No. of Transceivers:	1
Terminal Position:	QUAD
Package Style (Meter):	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE
Data Rate:	1000 Mbps
JESD-30 Code:	S-XQCC-N48
Package Shape:	SQUARE
Terminal Form:	NO LEAD
Maximum Operating Temperature:	85 Cel
Package Code:	HVQCCN
Width:	7 mm
Moisture Sensitivity Level (MSL):	3
Other Names:	KSZ9031RNXIA-DKR KSZ9031RNXIA TR-ND KSZ9031RNXIA TR KSZ9031RNXIA-CT
Telecom IC Type:	ETHERNET TRANSCEIVER
JESD-609 Code:	e3
Minimum Operating Temperature:	-40 Cel
No. of Functions:	1
Package Equivalence Code:	LCC48,.27SQ,20
Length:	7 mm
Peak Reflow Temperature (C):	260
Terminal Pitch:	.5 mm
Temperature Grade:	INDUSTRIAL

Category Top Products

TJA1040T/VM,112

NXP Semiconductors

NXP Semiconductors' TJA1040T/VM,112 is a CMOS interface circuit with 8 terminals and 5V supply voltage. It operates at 1Mbps data rate, suitable for network interfaces. The small outline package measures 4.9mm x 3.9mm with gull wing terminals, making it ideal for surface mount applications.

KSZ8001LI-TR

Micrel

ETHERNET TRANSCEIVER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 48; Package Code: LFQFP; Package Shape: SQUARE;

SN65HVD102RGBT

Texas Instruments

SN65HVD102RGBT by Texas Instruments is a network interface chip with 20 terminals, operating temperature range of -40 to 105°C, and support for 24V supply voltage. It is designed for industrial applications requiring low power consumption (2mA) and features a compact rectangular package suitable for surface mounting. The chip carrier design with nickel/palladium/gold finish makes it ideal for telecom circuits in harsh environments.

TJA1028T/3V3/20/1J

NXP Semiconductors

NXP Semiconductors' TJA1028T/3V3/20/1J is a LIN transceiver with 8 terminals, operating voltage of 3.3V, and max supply current of 4.5mA. It has AEC-Q100 screening level for automotive applications, with temp range from -40 to 150°C. Package style is small outline, suitable for surface mount assembly in compact designs.

DP83849IDVS/NOPB

National Semiconductor

ETHERNET TRANSCEIVER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 80; Package Code: QFP; Package Shape: SQUARE;

KSZ9031MNXCA

Microchip Technology

KSZ9031MNXCA by Microchip: Ethernet transceiver with 1000 Mbps data rate, operates at 0-70°C. Features 64 terminals in square chip carrier package suitable for network interfaces. Ideal for commercial telecom applications requiring a compact design and low power consumption.

KSZ9897RTXC-TR

Microchip Technology

Microchip Technology's KSZ9897RTXC-TR is an Ethernet transceiver with 128 terminals in a square package. Operating temperature ranges from 0 to 70°C, suitable for commercial use. It features matte tin terminal finish and is designed for network interfaces requiring a nominal voltage of 1.2V.

TLE7268SKXUMA1

Infineon Technologies

INTERFACE CIRCUIT; Terminal Finish: TIN; Moisture Sensitivity Level (MSL): 3; JESD-609 Code: e3;

CYP15G0101DXB-BBXI

Infineon Technologies

CYP15G0101DXB-BBXI by Infineon Technologies is a network interface with 100 terminals, operating at 3.3V. It features a data rate of 1500 Mbps and uses BICMOS technology for industrial applications. The package style is grid array, low profile, with a square shape and terminal finish of tin silver copper.

SN65HVD232D

Texas Instruments

SN65HVD232D by Texas Instruments is a BICMOS technology interface circuit with 1Mbps data rate, suitable for industrial applications. It operates at 3.3V, has 8 terminals in a small outline package style, and can withstand temperatures from -40 to 85°C. Ideal for network interfaces requiring low supply current and high reliability.

KSZ9031RNXCC-TR

Microchip Technology

The Microchip Technology KSZ9031RNXCC-TR is a 48-terminal Ethernet transceiver with a data rate of 1000 Mbps. It operates b/w 0 to 70°C, suitable for commercial applications. This surface-mount chip carrier has a very thin profile and matte tin finish, ideal for network interfaces in compact devices.

TCAN4550RGYRQ1

Texas Instruments

TCAN4550RGYRQ1 by Texas Instruments is an automotive-grade interface circuit with 8 Mbps data rate. It operates b/w -40 to 125 °C and has a supply voltage of 12 V. This chip carrier package with matte tin terminals is ideal for network interfaces in automotive applications.

TCAN4550RGYR

Texas Instruments

TCAN4550RGYR by Texas Instruments is a network interface chip carrier with 20 terminals, operating temperature range of -40 to 125°C. It has a data rate of 5 Mbps, suitable for automotive applications requiring a nominal voltage of 12V. The package style is very thin profile, making it ideal for surface mount applications in telecom interface circuits.

TJA1041T/CM,118

NXP Semiconductors

NXP Semiconductors' TJA1041T/CM,118 is a Network Interface IC with 14 terminals in a small outline package. It operates at 5V nominal voltage and has a peak reflow temperature of 260°C. Ideal for telecom applications, it features Gull Wing terminal form and dual position.

LAN8742A-CZ-TR

Microchip Technology

LAN8742A-CZ-TR by Microchip is an Ethernet transceiver with 100 Mbps data rate. It operates at 0-70°C, has 24 terminals in a square chip carrier package style, and matte tin terminal finish. Ideal for network interfaces in commercial telecom applications due to its small size and surface mount capability.

MCP2561FD-E/P

Microchip Technology

MCP2561FD-E/P by Microchip: CAN FD transceiver for automotive apps. Data rate up to 8 Mbps, operates at -40 to 125°C. Package style: in-line, with 8 terminals and matte tin finish.

LTC2875MPS8#PBF

Linear Technology

INTERFACE CIRCUIT; Temperature Grade: MILITARY; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;

KSZ8041TLI-S

Microchip Technology

KSZ8041TLI-S by Microchip Technology is a network interface with 48 terminals and a package shape of square. It operates at temperatures ranging from -40 to 85 °C and has a data rate of 100 Mbps. This Ethernet transceiver is commonly used in industrial applications.

AR8031-AL1B-R

Qualcomm

Qualcomm's AR8031-AL1B-R is an Ethernet transceiver with 1000 Mbps data rate, operating at -40 to 85°C. It features a square chip carrier package style, 48 terminals, and requires 3.3V supply voltage. Ideal for industrial telecom applications due to its compact size and low power consumption of 113.7 mA.

TJA1042T/CM,118

NXP Semiconductors

NXP Semiconductors' TJA1042T/CM,118 is a network interface IC with 8 terminals and AEC-Q100 screening. Operating at 5V, it supports data rates up to 1 Mbps for automotive applications. The small outline package with dual terminal position makes it suitable for compact designs in harsh environments.