Image shown is a representation only. Exact specifications should be obtained from the product data sheet.

All prices are in USD

Bulk

QTY	Unit Price	Ext Price
1,855	$1.837	$3,408.192

SN754410NE

Manufacturer

Texas Instruments
Manufacturer's Part Number

SN754410NE
Description

HALF BRIDGE BASED PERIPHERAL DRIVER; Temperature Grade: INDUSTRIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 16; Package Code: DIP; Package Shape: RECTANGULAR;
Datasheet

Datasheet

1855 In Stock

Popular Products

1N4148WT

Sangdest Microelectronics (Nanjing)

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

BSS138

Panjit International

N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain-Source On Resistance: 3 ohm; Minimum DS Breakdown Voltage: 50 V; Terminal Form: GULL WING;

Details

TCA6424ARGJR

Texas Instruments

TCA6424ARGJR by Texas Instruments is a CMOS parallel I/O port with 24 bits and 3 ports. It operates b/w -40 to 85°C, suitable for industrial applications. With a max clock frequency of 0.4 MHz, it offers low power consumption at only 0.03 mA supply current.

Details

SZNUP2105LT1G

Onsemi

SZNUP2105LT1G by Onsemi is a Transient Suppression Device with 2 elements in a common anode configuration. It has a max non-repetitive peak reverse power dissipation of 350W and breakdown voltage of 29.1V. Ideal for applications requiring bidirectional polarity protection, such as automotive electronics and industrial equipment due to its AEC-Q101 compliance and high clamping voltage of 44V.

Details

LL4148

Bytesonic Electronics

RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;

Details

2N2222A

Bharat Electronics

NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;

Details

2N2222A

National Semiconductor

NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .5 A;

Details

CR0805-FX-10R0ELF

Bourns

Bourns CR0805-FX-10R0ELF is a SMT fixed resistor with 10 ohm resistance, 1% tolerance, and 0.125 W power dissipation. Ideal for applications requiring a temperature range of -55 to 155 °C, such as automotive electronics and industrial control systems.

Details

2N2222A

Electronic Transistors

NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;

Details

BSS123LT1G

Onsemi

BSS123LT1G by Onsemi is a N-CHANNEL FET with 100V DS breakdown voltage, 0.17A drain current, and 6 ohm on resistance. Ideal for switching applications, it operates in enhancement mode with a max power dissipation of 0.225W. It comes in a small outline package with gull wing terminals and can withstand temperatures from -55 to 150°C.

Details

SS14

Hy Electronic

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

SS14

Changzhou Galaxy Century Microelectronics

RECTIFIER DIODE; Surface Mount: YES; No. of Phases: 1; Maximum Non Repetitive Peak Forward Current: 40 A; Technology: SCHOTTKY; No. of Elements: 1;

Details

BAT54SLT1G

Onsemi

BAT54SLT1G by Onsemi is a fast recovery Schottky diode with 2 elements in series connected configuration. It has a max reverse recovery time of 0.005 us and a max forward voltage of 0.8 V. Ideal for applications requiring high-speed rectification, it operates b/w -55 to 150 °C and can handle a max output current of 0.2 A.

Details

1N4148

Hy Electronic

RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;

Details

2N2222A

Texas Instruments

2N2222A by Texas Instruments is a small signal NPN bipolar junction transistor (BJT) with a max collector-emitter voltage of 40V and a max collector current of 0.8A. It is commonly used for switching applications due to its fast turn on/off times (35ns/285ns) and high transition frequency (300MHz).

Details

SMBJ18CA

Changzhou Starsea Electronics

TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

DS18B20Z

Dallas Semiconductor

TEMPERATURE SENSOR,SWITCH/DIGITAL OUTPUT,SERIAL; Mounting Feature: SURFACE MOUNT; No. of Terminals: 8; Package Shape or Style: RECTANGULAR; Housing: PLASTIC; Maximum Accuracy (Cel): 0.50;

Details

CRCW080510R0FKEA

Vishay Intertechnology

Vishay Intertechnology's CRCW080510R0FKEA is a fixed resistor with 10 ohm resistance, 1% tolerance, and 0.125 W power dissipation. Ideal for surface mount applications in automotive electronics due to its AEC-Q200 reference standard and operating voltage of 150 V. Operating temperature range from -55 to 155 °C ensures reliability in various environments.

Details

LM2931AZ-5.0RPG

Onsemi

LM2931AZ-5.0RPG by Onsemi is a Fixed Positive Single Output LDO Regulator with 5V nominal output voltage and 0.1A max output current. It features a low dropout voltage of 0.6V, making it suitable for applications requiring stable power supply in temperature range from -40 to 125°C. The package style is cylindrical with matte tin terminal finish, ideal for various electronic devices needing precise voltage regulation.

Details

LM555CM

Intersil

Analog Waveform Generation Functions; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;

Details

SN754410NE Technical Details

TYPE	DESCRIPTION
Minimum Supply Voltage:	4.5 V
Package Body Material:	PLASTIC/EPOXY
Minimum Supply Voltage-1:	4.5 V
Nominal Supply Voltage:	5 V
Output Characteristics:	3-STATE
Maximum Seated Height:	5.08 mm
Maximum Output Current:	1 A
Surface Mount:	NO
Maximum Supply Current:	70 mA
Terminal Finish:	NICKEL PALLADIUM GOLD
No. of Terminals:	16
Terminal Position:	DUAL
Package Style (Meter):	IN-LINE
Technology:	BIPOLAR
JESD-30 Code:	R-PDIP-T16
Package Shape:	RECTANGULAR
Terminal Form:	THROUGH-HOLE
Built-in Protections:	TRANSIENT; THERMAL
Maximum Operating Temperature:	85 Cel
Package Code:	DIP
Interface IC Type:	HALF BRIDGE BASED PERIPHERAL DRIVER
Width:	7.62 mm
Nominal Supply Voltage-1:	24 V
Turn-off Time:	.8 us
Maximum Supply Voltage-1:	36 V
Other Names:	-SN754410NE-NDR -SN754410NEE4 296-9911-5-NDR -SN754410NEE4-NDR -296-9911-5-ND 296-9911-5 -296-9911-5
Output Polarity:	TRUE
Input Characteristics:	STANDARD
Driver No. of Bits:	4
Maximum Supply Voltage:	5.5 V
Turn-on Time:	.4 us
Nominal Output Peak Current Limit:	2 A
JESD-609 Code:	e4
Minimum Operating Temperature:	-40 Cel
No. of Functions:	2
Qualification:	Not Qualified
Output Current Flow Direction:	SOURCE AND SINK
Length:	19.177 mm
Terminal Pitch:	2.54 mm
Temperature Grade:	INDUSTRIAL

Category Top Products

BTS133TCBUMA1

Infineon Technologies

BTS133TCBUMA1 by Infineon is a MOS peripheral driver with built-in protections for transient, over current, and over voltage. It has 2 terminals in a small outline package style with Gull Wing terminal form. With a nominal output peak current limit of 7A, it is commonly used in applications requiring sink output current flow direction.

BTS443PAUMA1

Infineon Technologies

BTS443PAUMA1 by Infineon is a MOS peripheral driver with 36V max supply voltage, 7.6A output current limit, and 410us turn-on/off time. It's used in applications requiring sink output flow direction, such as automotive systems for transient, overcurrent, overvoltage protection.

VND14NV04TR-E

STMicroelectronics

VND14NV04TR-E by STMicroelectronics is a small outline peripheral driver with built-in protections against transient, over current, and over voltage. It has a nominal output peak current limit of 18A and turn-on time of 4.5µs. Ideal for applications requiring sink output current flow direction in compact spaces.

VNQ500PEP-E

STMicroelectronics

STMicroelectronics' VNQ500PEP-E is a peripheral driver with 4 functions, operating at supply voltages of 5.5V to 36V. It offers built-in protections against transient, over current, over voltage, thermal, and under voltage issues. This small outline package with gull wing terminals is ideal for buffer or inverter-based applications requiring a low profile design.

ITS4075QEPDXUMA1

Infineon Technologies

ITS4075QEPDXUMA1 by Infineon Technologies is a Peripheral Driver with 4 functions, operating at supply voltages b/w 8V to 36V. It offers built-in protections against transient, over current, over voltage, thermal, and under voltage conditions. This small outline package with gull wing terminals is ideal for applications requiring a nominal output peak current limit of 2.6A.

NUD3160DMT1G

Onsemi

NUD3160DMT1G by Onsemi is a Peripheral Driver with 2 functions, operating at -40 to 125 °C. It has a max supply voltage of 60 V and output current of 0.15 A. Ideal for automotive applications requiring BUFFER OR INVERTER BASED PERIPHERAL DRIVER interface ICs.

FAN7888MX

Fairchild Semiconductor

HALF BRIDGE BASED PERIPHERAL DRIVER; Temperature Grade: AUTOMOTIVE; Terminal Form: GULL WING; No. of Terminals: 20; Package Code: SOP; Package Shape: RECTANGULAR;

ISO1H816GAUMA1

Infineon Technologies

Infineon's ISO1H816GAUMA1 is a 36-terminal peripheral driver with 1.2A output current, suitable for sink applications. It operates on power supplies of 3.3/5V and 15/30V, featuring a half-bridge interface IC type for driving various peripherals efficiently in electronic systems. The package style is small outline with gull wing terminals, making it ideal for compact designs requiring high peak current limits up to 4.4A.

LTC4376HDHD#TRPBF

Analog Devices

LTC4376HDHD#TRPBF by Analog Devices is a 16-terminal peripheral driver with built-in transient protection. It operates b/w -40 to 125 °C, with a supply voltage range of 4-40 V. Ideal for automotive applications, it features a small outline package and 0.5 mm terminal pitch for efficient performance.

L6201013TR

STMicroelectronics

L6201013TR by STMicroelectronics is a full bridge peripheral driver with 20 terminals, operating voltage range of 12-48V. It features built-in transient and thermal protections, output polarity is true with source and sink current flow direction. Ideal for applications requiring high reliability in small outline packages.

LMD18200T/LF14

Texas Instruments

LMD18200T/LF14 by Texas Instruments is a peripheral driver with a max supply voltage of 55V and built-in protections for transient, thermal, and under voltage. It has a max output current of 6A and operates in automotive temperature grades. This HB-based peripheral driver with PWM is ideal for applications requiring high current sourcing and sinking capabilities.

FPF2124

Fairchild Semiconductor

BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 5; Package Code: LSSOP; Package Shape: RECTANGULAR;

FPF2700MX

Fairchild Semiconductor

BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;

IPS160HFTR

STMicroelectronics

BUFFER OR INVERTER BASED PERIPHERAL DRIVER;

BTS3408GXT

Infineon Technologies

BTS3408GXT by Infineon is a peripheral driver with 60V max supply voltage, built-in protections, and 0.55A nominal output peak current limit. It is used as a buffer or inverter-based peripheral driver in various applications requiring sink output current flow direction. The small outline package style makes it suitable for compact designs with its 1.75mm max seated height and dual terminal position.

FPF2701MPX

Onsemi

FPF2701MPX by Onsemi is a peripheral driver with a max supply voltage of 36V and built-in protections for over current, thermal, and under voltage. It has 8 terminals in a small outline package style suitable for industrial applications requiring a nominal output peak current limit of 0.4A.

BTS141TCBUMA1

Infineon Technologies

BTS141TCBUMA1 by Infineon Technologies is a peripheral driver with built-in protections for transient, over current, and over voltage. It has a nominal output peak current limit of 35A and turn-on time of 40us. This small outline package driver is ideal for applications requiring sink output current flow direction.

VN800PSTR-E

STMicroelectronics

STMicroelectronics' VN800PSTR-E is a peripheral driver with 8-36V power supplies, 0.7A max output current, and built-in protections. Ideal for automotive applications due to AEC-Q100 screening level and sink output current flow direction. Package style: small outline, terminal pitch: 1.27mm, and moisture sensitivity level of 3.

BTS621L1E3128ABUMA1

Infineon Technologies

BTS621L1E3128ABUMA1 by Infineon is a MOS peripheral driver with 6 terminals, AEC-Q100 screening, and built-in protections against transient, over current, and over voltage. It operates at supply voltages ranging from 5V to 34V and has a nominal output peak current limit of 4.4A. Ideal for automotive applications requiring sink output current flow direction in a compact small outline package style.

TBD62783APG

Toshiba

Toshiba's TBD62783APG is a Peripheral Driver with 8 functions, operating at -40 to 85°C. It has a max supply voltage of 50V and built-in transient protection. Ideal for industrial applications requiring a true output polarity and standard input characteristics.