Image shown is a representation only. Exact specifications should be obtained from the product data sheet.

BTN8962TAAUMA1

Manufacturer

Infineon Technologies
Manufacturer's Part Number

BTN8962TAAUMA1
Description

HALF BRIDGE BASED PERIPHERAL DRIVER; Terminal Form: GULL WING; No. of Terminals: 7; Package Code: TO-263; Package Shape: RECTANGULAR; Terminal Finish: TIN;
Datasheet

Datasheet

Not In Stock

Popular Products

2N7002

Siliconix

N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Maximum Drain Current (ID): .115 A; Operating Mode: ENHANCEMENT MODE;

Details

1N4148

Won-top Electronics

RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;

Details

2N2222A

Itt Semiconductor

NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;

Details

EPCS4SI8N

Intel

EPCS4SI8N by Intel is a small outline flash memory with 512Kx8 organization, operating at 3.3V. It features a max clock frequency of 40MHz and endurance of 100k write/erase cycles. Ideal for industrial applications requiring configuration memory with serial interface and low standby current consumption.

Details

BAV99

Infinex

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

SMBJ18CA

Vishay Semiconductors

TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: J BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

2N7002

Nexperia

N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .83 W; No. of Elements: 1; Transistor Application: SWITCHING;

Details

BAV99

Bytesonic Electronics

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

1N4148WT

Formosa Microsemi

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

M39029/58-360

Positronic Industries

CONNECTOR ACCESSORY; MIL-Connector Accessory Name: CONTACT; DIN Conformity: NO; National Stock Number (NSN): 5999004733551; Mating Contacts: M39029/56-348, M39029/57-354; Contact Type: CRIMP REAR RELEASE;

Details

FSMLF327

Fox Electronics

FSMLF327 by Fox Electronics is a crystal oscillator with 20 ppm frequency tolerance, 144% stability, and 50000 ohm series resistance. Ideal for applications requiring precise timing such as communication systems, industrial automation, and consumer electronics. Operating temperature range from -40 to 85 °C.

Details

NDT2955

Fairchild Semiconductor

P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 3 W; Package Style (Meter): SMALL OUTLINE; Maximum Drain Current (Abs) (ID): 2.5 A;

Details

MURS160T3G

Onsemi

MURS160T3G by Onsemi is a single rectifier diode with a max output current of 2A and max repetitive peak reverse voltage of 600V. It has a fast recovery time of 0.075us, making it suitable for high voltage applications. The diode operates in temperatures ranging from -65 to 175°C, ideal for power systems requiring ultra-fast response.

Details

1N4148

Invensys Sensor Systems

RECTIFIER DIODE; Surface Mount: NO; No. of Phases: 1; Maximum Reverse Recovery Time: .004 us; Config: SINGLE; Maximum Repetitive Peak Reverse Voltage: 100 V;

Details

CRCW06030000Z0EAHP

Vishay Intertechnology

Vishay Intertechnology's CRCW06030000Z0EAHP is a 0 ohm jumper resistor with METAL GLAZE/THICK FILM tech. Operating temp range -55 to 155 °C, it's SMT package style makes it ideal for automotive applications meeting AEC-Q200 standard.

Details

SMBJ18CA

Lite-on Semiconductor

TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

SS14

Eic Semiconductor

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

2N2222A

ROHM

NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .6 A;

Details

TCA6424ARGJR

Texas Instruments

TCA6424ARGJR by Texas Instruments is a CMOS parallel I/O port with 24 bits and 3 ports. It operates b/w -40 to 85°C, suitable for industrial applications. With a max clock frequency of 0.4 MHz, it offers low power consumption at only 0.03 mA supply current.

Details

LM107H/883C

General Electric Solid State

OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Wideband: NO;

Details

BTN8962TAAUMA1 Technical Details

TYPE	DESCRIPTION
Minimum Supply Voltage:	8 V
Package Body Material:	PLASTIC/EPOXY
Nominal Supply Voltage:	13.5 V
Maximum Seated Height:	4.5 mm
Surface Mount:	YES
Terminal Finish:	TIN
No. of Terminals:	7
Terminal Position:	SINGLE
Package Style (Meter):	SMALL OUTLINE
Screening Level:	AEC-Q100
Technology:	MOS
JESD-30 Code:	R-PSSO-G7
Package Shape:	RECTANGULAR
Terminal Form:	GULL WING
Built-in Protections:	TRANSIENT; OVER CURRENT; OVER VOLTAGE; UNDER VOLTAGE; THERMAL
Package Code:	TO-263
Interface IC Type:	HALF BRIDGE BASED PERIPHERAL DRIVER
Width:	9.25 mm
Moisture Sensitivity Level (MSL):	3
Output Polarity:	TRUE
Input Characteristics:	SCHMITT TRIGGER
Maximum Supply Voltage:	18 V
JESD-609 Code:	e3
No. of Functions:	1
Package Equivalence Code:	SMSIP7H,.55,50TB
Output Current Flow Direction:	SOURCE AND SINK
Length:	10 mm
Terminal Pitch:	1.27 mm

Category Top Products

MIC2981/82YN

Micrel

BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Temperature Grade: INDUSTRIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 18; Package Code: DIP; Package Shape: RECTANGULAR;

LMG1210RVRT

Texas Instruments

LMG1210RVRT by Texas Instruments is a peripheral driver with 2 channels, capable of handling a max output current of 3A. It operates in automotive-grade temperatures (-40 to 125°C) and features built-in thermal and under voltage protections. This chip carrier package with very thin profile is suitable for applications requiring fast turn-on/off times and source/sink current flow control.

BTS711L1XT

Infineon Technologies

BTS711L1XT by Infineon Technologies is a peripheral driver with a max supply voltage of 34V. It has built-in protections for transient, over current, over voltage, thermal, and under voltage conditions. This MOS technology-based device is suitable for applications requiring buffer or inverter based peripheral drivers.

ULN2068B

STMicroelectronics

STMicroelectronics' ULN2068B is a 4-function peripheral driver with built-in transient protection. It operates at 5V, has a max output current of 1.5A, and features bipolar technology. Ideal for applications requiring sink output current flow direction and fast turn-on/off times in a compact IN-LINE package style.

FPF2108

Fairchild Semiconductor

BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 5; Package Code: LSSOP; Package Shape: RECTANGULAR;

IRS21850SPBF

Infineon Technologies

IRS21850SPBF by Infineon is a CMOS peripheral driver with 8 terminals in a small outline package. It operates b/w -40 to 125 °C and has built-in transient and under voltage protections. Ideal for automotive applications, it features a max supply voltage of 20 V and turn-on/off time of 0.21 us.

L9333MD

STMicroelectronics

L9333MD by STMicroelectronics is a peripheral driver with built-in protections for transient, over current, and thermal issues. It operates at a max supply voltage of 32V and has a peak output current of 0.015A. This rectangular-shaped driver in small outline package style is ideal for buffer or inverter-based interface IC applications.

E-L9826TR

STMicroelectronics

E-L9826TR by STMicroelectronics is a 20-terminal SIPO-based peripheral driver with built-in transient, over current, and thermal protections. It operates at supply voltages b/w 4.5V to 5.5V, providing a nominal output peak current limit of 1A. This rectangular package driver is ideal for sink applications requiring fast turn-on/off times in compact designs.

TBD62083AFG

Toshiba

Toshiba's TBD62083AFG is an 8-bit buffer/inverter peripheral driver with a max output current of 0.4A, suitable for industrial applications. It operates b/w -40 to 85°C, with built-in transient protection and a terminal pitch of 1.27mm in a small outline package style.

VND7050AJTR

STMicroelectronics

VND7050AJTR by STMicroelectronics is a 16-terminal peripheral driver with built-in protections for transient, over current, and over voltage. It operates b/w 4-28 V, has turn-on/off times of 120/100 us, and is ideal for interface IC applications requiring sink output current flow direction.

ST890CDR

STMicroelectronics

ST890CDR by STMicroelectronics is a peripheral driver with 8 terminals, operating voltage range of 2.7-5.5V, and max output current of 1.2A. It features built-in protections against overcurrent and thermal issues, suitable for industrial applications requiring buffer or inverter-based interface ICs with fast turn-on/off times.

VN750PSTR-E

STMicroelectronics

STMicroelectronics' VN750PSTR-E is a peripheral driver with built-in protections for transient, over current, and over voltage. It operates within a supply voltage range of 5.5V to 36V and can handle a max output current of 2A. Ideal for applications requiring true output polarity and source flow direction in compact designs.

ISO8200B

STMicroelectronics

ISO8200B by STMicroelectronics is a peripheral driver with built-in protections for transient, over current, and over voltage. It operates b/w -40 to 125 °C with a supply voltage range of 10.5-36 V, making it suitable for automotive applications requiring a nominal output peak current limit of 1.1 A.

L6203

STMicroelectronics

STMicroelectronics L6203 is a full bridge peripheral driver with 48V max supply voltage, built-in transient and thermal protections. Ideal for applications requiring source and sink output current flow direction, it features 11 terminals in a rectangular package style with through-hole terminal form.

MIC5891YWM

Microchip Technology

MIC5891YWM by Microchip Tech is a 16-terminal peripheral driver with max supply voltage of 12V and min operating temp of -40°C. Ideal for industrial applications, it features BICMOS technology, open-emitter output characteristics, and built-in transient protection.

TPIC6B595DWG4

Texas Instruments

TPIC6B595DWG4 by Texas Instruments is a register-based peripheral driver with 8 bits. It has a max supply voltage of 5.5V and can handle a max output current of 0.15A. Ideal for automotive applications due to its built-in transient protections and small outline package style.

TPS1H200AQDGNRQ1

Texas Instruments

TPS1H200AQDGNRQ1 by Texas Instruments is a high side driver with 40V max supply voltage, 4V min supply voltage, and 125°C max operating temp. Ideal for automotive applications due to AEC-Q100 screening level and built-in protections against transient, over current, and thermal issues.

DRV103H/2K5G3

Texas Instruments

DRV103H/2K5G3 by Texas Instruments is a peripheral driver with a max supply voltage of 32V and built-in protections for transient, over current, and thermal issues. It operates in industrial temperature grades from -40 to 85°C, making it suitable for various applications requiring a nominal output peak current limit of 3.5A. The package style is small outline with gull wing terminals, ideal for surface mount designs.

ITS4200SMENHUMA1

Infineon Technologies

BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Terminal Finish: TIN; Moisture Sensitivity Level (MSL): 3; JESD-609 Code: e3;

BTS72004EPAXUMA1

Infineon Technologies

BTS72004EPAXUMA1 by Infineon Technologies is a peripheral driver with a max supply voltage of 18V. It offers built-in protections against transient, over current, over voltage, and thermal issues. This compact driver, with dimensions of 4.9mm x 3.9mm x 1.15mm, is suitable for applications requiring true output polarity and a max output current of 0.004A.