Image shown is a representation only. Exact specifications should be obtained from the product data sheet.

All prices are in USD

Bulk

QTY	Unit Price	Ext Price
871	$1.472	$1,282.548

SN75176BD

Manufacturer

Texas Instruments
Manufacturer's Part Number

SN75176BD
Description

LINE TRANSCEIVER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
Datasheet

Datasheet

871 In Stock

Popular Products

EU2B-YS3203F

Idec

ROTARY SWITCH;

Details

SMBJ18CA

Changzhou Starsea Electronics

TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

AT90CAN128-16AU

Microchip Technology

AT90CAN128-16AU by Microchip Technology is a microcontroller with 8-bit data RAM and 16-bit address bus width. It operates at a max clock frequency of 16 MHz, making it suitable for industrial applications requiring low power mode and connectivity options like CAN, SPI, and USART. With 53 I/O lines and 8-channel 10-bit ADCs, this microcontroller offers versatile peripheral support for various embedded systems.

Details

SS495ASP

Micro Switch

The Micro Switch SS495ASP is an analog circuit IC with a supply voltage range of 4.5V to 10.5V, suitable for automotive applications. Its package body material is plastic/epoxy, and it has a rectangular shape with three terminals. Operating temperature ranges from -40°C to 125°C, making it ideal for various automotive sensor and control systems.

Details

LM358M

Texas Instruments

LM358M by Texas Instruments is an Operational Amplifier with 2 functions, featuring a max input offset voltage of 9000 uV and a nominal voltage of 5 V. It is commonly used in applications requiring high common mode rejection ratio and low bias current, such as sensor interfaces and signal conditioning circuits.

Details

BSS84-7-F

Diodes Incorporated

Diodes Inc. BSS84-7-F is a P-channel FET with 50V DS breakdown voltage, 0.13A max drain current, and 10 ohm RDS(on). Ideal for switching applications, it features a single configuration with built-in diode in a small outline package. Operating in enhancement mode at up to 150°C, it has Gull Wing terminals and matte tin finish.

Details

BAV99

Infineon Technologies

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

1N4148

Silicon Standard

RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;

Details

SS14

Jgd Semiconductors

RECTIFIER DIODE; Surface Mount: YES; Technology: SCHOTTKY; Maximum Non Repetitive Peak Forward Current: 30 A; Maximum Forward Voltage (VF): .55 V; No. of Phases: 1;

Details

SMBJ18CA

Microsemi

TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

1N4148WS

General Semiconductor

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

1N4148WS

Rochester Electronics

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

BAT54C-7-F

Diodes Incorporated

BAT54C-7-F by Diodes Inc. is a Schottky rectifier diode with common cathode, 2 elements, and max forward voltage of 0.24V. Ideal for applications requiring fast reverse recovery time of 0.005 us, such as in small outline packages for surface mount technology at temperatures ranging from -65 to 150°C.

Details

1N4148WS

Rectron

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

LL4148

Surge Components

RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;

Details

BAV99

Zetex Plc

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

M39029/58360

Souriau

CONNECTOR ACCESSORY; Associated Military - Specifications: MIL-DTL-38999; Tool Settings: M22520/2-09; Terminal Type: CRIMP; MIL Conformity: YES; Mating Contacts: M39029/56348;

Details

NC7WZ17P6X

Onsemi

The Onsemi NC7WZ17P6X is a logic gate with 2 functions, featuring a propagation delay of 13.1 ns at 1.8V supply voltage. Ideal for industrial applications, it operates b/w -40 to 85°C and has a max power supply current of 100mA. With Schmitt Trigger technology and small outline packaging, it suits compact electronic designs requiring fast signal processing.

Details

1N4148

Changzhou Galaxy Century Microelectronics

RECTIFIER DIODE; Surface Mount: NO; Config: SINGLE; Peak Reflow Temperature (C): 260; No. of Phases: 1; Diode Element Material: SILICON;

Details

BSS138W-7-F

Diodes Incorporated

Diodes Inc.'s BSS138W-7-F is a N-channel FET with 50V DS breakdown voltage, ideal for switching applications. It features single configuration with built-in diode, Gull Wing terminals, and operates in enhancement mode. With 0.2A max drain current and 3.5 ohm RDS(on), it's UL recognized and suitable for small outline packages at temperatures ranging from -55 to 150°C.

Details

SN75176BD Technical Details

TYPE	DESCRIPTION
Minimum Supply Voltage:	4.75 V
Package Body Material:	PLASTIC/EPOXY
Minimum Supply Voltage-1:	4.75 V
Maximum Time At Peak Reflow Temperature (s):	30
Sub-Category:	Line Driver or Receivers
Surface Mount:	YES
Technology:	BIPOLAR
Package Shape:	RECTANGULAR
Terminal Form:	GULL WING
Package Code:	SOP
Interface Standard:	EIA-422-B; TIA-422-B; EIA-485-A; TIA-485-A; V.11; X.27
Nominal Supply Voltage-1:	5 V
Maximum Supply Voltage-1:	5.25 V
Maximum Output Low Current:	8 Amp
Moisture Sensitivity Level (MSL):	1
Input Characteristics:	DIFFERENTIAL SCHMITT TRIGGER
Qualification:	Not Qualified
Package Equivalence Code:	SOP8,.25
Receiver No. of Bits:	1
Additional Features:	3-STATE DRIVER AND RECEIVER OUTPUTS
Peak Reflow Temperature (C):	260
Terminal Pitch:	1.27 mm
Nominal Supply Voltage:	5 V
Output Characteristics:	3-STATE
Maximum Seated Height:	1.75 mm
Minimum Out Swing:	1.5 V
Maximum High Level Input Current:	.00002 Amp
Maximum Supply Current:	70 mA
Terminal Finish:	NICKEL PALLADIUM GOLD
No. of Terminals:	8
Terminal Position:	DUAL
Package Style (Meter):	SMALL OUTLINE
JESD-30 Code:	R-PDSO-G8
Maximum Operating Temperature:	70 Cel
Interface IC Type:	LINE TRANSCEIVER
Width:	3.9 mm
Other Names:	296-1275-5 296-52975 -SN75176BDE4-NDR TEXTISSN75176BD SN75176BDG4-ND -296-1275-5 296-52974 -296-1275-5-ND -296-1738 -SN75176BDE4 -SN75176BDG4 296-52974-ND SN75176BDE4 -SN75176BD-NDR SN75176BDE4-ND 296-52975-ND SN75176BDG4 296-1738 -SN75176BDG4-NDR 2156-SN75176BD
Output Polarity:	COMPLEMENTARY
Driver No. of Bits:	1
Maximum Supply Voltage:	5.25 V
Differential Output:	YES
JESD-609 Code:	e4
Minimum Operating Temperature:	0 Cel
No. of Functions:	1
Maximum Transmit Delay:	22 ns
Length:	4.9 mm
Maximum Receive Delay:	35 ns
Temperature Grade:	COMMERCIAL
Power Supplies (V):	5

Category Top Products

MAX485EPA

Maxim Integrated

MAX485EPA by Maxim Integrated is a Line Driver & Receiver with 5V supply, 60ns max transmit delay, and 200ns max receive delay. Ideal for EIA-422/EIA-485 interfaces in industrial applications due to its CMOS technology and differential output.

LTM2881IY-5#PBF

Linear Technology

LINE TRANSCEIVER; Temperature Grade: INDUSTRIAL; Terminal Form: BALL; No. of Terminals: 32; Package Code: BGA; Package Shape: RECTANGULAR;

MAX3485ECSA+

Maxim Integrated

LINE TRANSCEIVER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;

MAX3221CAE+

Analog Devices

Analog Devices' MAX3221CAE+ is a Line Driver & Receiver with 16 terminals, operating at 3-5.5V. It features a CMOS technology, EIA-232 interface standard, and Schmitt trigger input characteristics. Ideal for applications requiring inverted output polarity and 3-state output characteristics in commercial temperature grades.

DS89C21TM/NOPB

National Semiconductor

LINE TRANSCEIVER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;

SN65HVD08DR

Texas Instruments

SN65HVD08DR by Texas Instruments is a Line Driver & Receiver with 3.3/5 V power supplies, 40 ns max transmit delay, and EIA-485-A interface standard. Ideal for industrial applications requiring true output polarity, differential output, and dual terminal position in a small outline package style.

MAX256ASA+T

Maxim Integrated

LINE DRIVER; Temperature Grade: AUTOMOTIVE; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: HLSOP; Package Shape: RECTANGULAR;

MAX3072EESA+

Analog Devices

MAX3072EESA+ by Analog Devices is a BICMOS line transceiver with EIA-422, EIA-485, TIA-485 interface standards. It operates at 3.3V with 1.5mA supply current and offers differential output with 1500ns transmit delay. Ideal for industrial applications requiring reliable communication over long distances.

MAX3232IDRE4

Texas Instruments

MAX3232IDRE4 by Texas Instruments is a Line Driver & Receiver with 16 terminals, operating at -40 to 85°C. It features a max supply voltage of 3.6V, transmit delay of 300ns, and output low current of 1.6A. Ideal for industrial applications requiring EIA-232-F, TIA-232-F, V.28 interface standard compatibility in compact designs with inverted output polarity.

MAX3232ECUE

Maxim Integrated

MAX3232ECUE by Maxim Integrated is a Line Driver & Receiver with 16 terminals. It operates b/w 3-5.5V, suitable for EIA-232, TIA-232 interfaces. With BICMOS technology, it has dual functions and GULL WING terminal form, ideal for commercial temperature grade applications.

MAX3471EUA+T

Analog Devices

MAX3471EUA+T by Analog Devices is a line driver with 8 terminals, operating at 2.5-5.5V, suitable for EIA-422 and EIA-485 interfaces. It offers differential outputs, low current of 0.1mA, and max transmit delay of 2000ns, making it ideal for industrial applications requiring reliable communication over short distances.

MAX3072EESA+

Maxim Integrated

LINE TRANSCEIVER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;

SN65C1168PWR

Texas Instruments

SN65C1168PWR by Texas Instruments is a Line Driver & Receiver with 2 functions. It operates at 5V, has a max transmit delay of 12ns, and supports EIA-422-B, TIA-422-B, V.11 standards. Ideal for industrial applications requiring differential output and Schmitt trigger input characteristics.

MAX3232EUE-T

Maxim Integrated

MAX3232EUE-T by Maxim Integrated is a Line Driver & Receiver with 3.3/5V power supplies, EIA-232/EIA-562 interface standard, and 1.6A max output low current. Ideal for industrial applications, it operates b/w -40 to 85°C with a small outline package style and dual terminal position.

MAX232EPE+

Analog Devices

MAX232EPE+ by Analog Devices is a Line Driver & Receiver with 2 functions, operating at 5V. It has a max transmit delay of 10000ns and output polarity is inverted. Widely used in industrial applications for EIA-232-E, TIA-232-E, V.28, and V.24 interface standards.

ISL83490IBZ-T

Renesas Electronics

ISL83490IBZ-T by Renesas Electronics is an 8-terminal line transceiver with a max supply voltage of 3.6V and differential output. It operates in industrial temperatures (-40 to 85°C) and supports EIA-485/EIA-422 interface standards, making it ideal for applications requiring reliable data transmission over long distances.

MAX3485EESA-T

Maxim Integrated

MAX3485EESA-T by Maxim Integrated is a CMOS Line Transceiver with EIA-422 and EIA-485 interface standards. It operates at 3.3V, has 8 terminals, and offers differential output. With a max transmit delay of 35ns, it's ideal for industrial applications requiring fast data transmission over short distances.

SN65LVDT2DBVTG4

Texas Instruments

SN65LVDT2DBVTG4 by Texas Instruments is a Line Receiver IC with 3.6V max supply voltage, 3.1ns max transmit delay, and 8mA max supply current. Ideal for industrial applications requiring TTL technology, EIA-644-A interface standard, and differential Schmitt trigger input characteristics.

ADM3485ARZ

Analog Devices

ADM3485ARZ by Analog Devices is a CMOS Line Transceiver with EIA-422 and EIA-485 interface standards. It operates at 3.3V, has a max supply current of 2.2mA, and offers differential output. Ideal for industrial applications requiring reliable communication over long distances.

SN75176BPSRG4

Texas Instruments

SN75176BPSRG4 by Texas Instruments is a Line Driver & Receiver with 8 terminals, operating at 5V. It features a max transmit delay of 22ns and differential output. Ideal for EIA-422-B, TIA-422-B, EIA-485-A, TIA-485-A interfaces in commercial temperature applications.