Image shown is a representation only. Exact specifications should be obtained from the product data sheet.

MAX232EPE+

Manufacturer

Analog Devices
Manufacturer's Part Number

MAX232EPE+
Description

LINE TRANSCEIVER; Temperature Grade: INDUSTRIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 16; Package Code: DIP; Package Shape: RECTANGULAR;
Datasheet

Not In Stock

Popular Products

2N2222A

International Devices

NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;

Details

1N4148

Grande Electronics

RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;

Details

LM107H/883

Rochester Electronics

OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Maximum Average Bias Current (IIB): .1 uA;

Details

1N4148

Capar Components

RECTIFIER DIODE; Surface Mount: NO; No. of Phases: 1; Maximum Forward Voltage (VF): 1 V; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Output Current: .15 A;

Details

BAV99

Taitron Components

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

LM358DR2G

Onsemi

LM358DR2G by Onsemi is a dual operational amplifier with 7000uV max input offset voltage and 70dB nominal CMRR. Ideal for applications requiring low bias current such as sensor interfaces, signal conditioning circuits, and audio amplifiers. Package style: Small Outline, Technology: Bipolar, Unity Gain Bandwidth: 1000 kHz.

Details

FT232RQ-REEL

FTDI

FTDI's FT232RQ-REEL is a USB bus controller with 32 terminals, operating at 3.3-5.25V. It supports data transfer rates up to 60MBps and clock frequency of 12.02MHz, suitable for RS232/RS422/RS485 interfaces in various applications like industrial automation and communication systems.

Details

BAV99

Gec Plessey Semiconductors

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

LL4148

Daco Semiconductor

RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;

Details

ULN2803A

Rochester Electronics

NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; Additional Features: LOGIC LEVEL COMPATIBLE; Qualification: Not Qualified;

Details

LL4148

Diotec Semiconductor Ag

RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;

Details

1N4148

Excel (Suzhou) Semiconductor

RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;

Details

LM317T

Tt Electronics Plc

ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: TO-220; Terminal Form: THROUGH-HOLE; Qualification Status: Not Qualified; JESD-30 Code: R-PSFM-T3;

Details

LL4148

Kec

RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;

Details

MBRS3200T3G

Onsemi

MBRS3200T3G by Onsemi is a Schottky rectifier diode with a max output current of 3A and a max forward voltage of 0.59V. It operates in temperatures ranging from -65°C to 175°C, making it suitable for power applications. The diode has a peak repetitive reverse voltage of 200V and is designed for surface mount installation in electronic circuits.

Details

LM317T

Fairchild Semiconductor

ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; Maximum Output Current-1: 1.5 A; No. of Outputs: 1; Qualification Status: Not Qualified;

Details

2N7002

Kec

N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR; Transistor Application: SWITCHING; Package Body Material: PLASTIC/EPOXY;

Details

2N7002

Silicon Standard

N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): .225 W; Maximum Drain-Source On Resistance: 7.5 ohm; Transistor Element Material: SILICON;

Details

MC33269T-3.3G

Onsemi

MC33269T-3.3G by Onsemi is a fixed positive single output LDO regulator with a max output current of 0.8 A and a dropout voltage of 1.35 V. It is commonly used in applications that require stable voltage regulation, such as power supplies for electronic devices.

Details

MBR0520L-T1

Won-top Electronics

MBR0520L-T1 by Won-top Electronics is a Schottky rectifier diode with 20V peak reverse voltage and 0.5A output current. It is a single-config, surface-mount diode in a small outline package, suitable for applications requiring high-speed switching and low forward voltage drop. Operating temperature range from -65°C to 125°C makes it ideal for various electronic circuits.

Details

MAX232EPE+ Technical Details

TYPE	DESCRIPTION
Minimum Supply Voltage:	4.5 V
Package Body Material:	PLASTIC/EPOXY
Nominal Supply Voltage:	5 V
Output Characteristics:	TOTEM-POLE
Maximum Time At Peak Reflow Temperature (s):	30
Maximum Seated Height:	4.572 mm
Minimum Out Swing:	10 V
Sub-Category:	Line Driver or Receivers
Surface Mount:	NO
Maximum Supply Current:	10 mA
Terminal Finish:	Matte Tin (Sn) - annealed
No. of Terminals:	16
Terminal Position:	DUAL
Package Style (Meter):	IN-LINE
Technology:	CMOS
JESD-30 Code:	R-PDIP-T16
Package Shape:	RECTANGULAR
Terminal Form:	THROUGH-HOLE
Maximum Operating Temperature:	85 Cel
Package Code:	DIP
Interface Standard:	EIA-232-E; TIA-232-E; V.28; V.24
Interface IC Type:	LINE TRANSCEIVER
Width:	7.62 mm
Maximum Output Low Current:	3.2 Amp
Moisture Sensitivity Level (MSL):	1
Output Polarity:	INVERTED
Input Characteristics:	SCHMITT TRIGGER
Driver No. of Bits:	2
Maximum Supply Voltage:	5.5 V
Differential Output:	NO
JESD-609 Code:	e3
Minimum Operating Temperature:	-40 Cel
No. of Functions:	2
Qualification:	Not Qualified
Maximum Transmit Delay:	10000 ns
Package Equivalence Code:	DIP16,.3
Receiver No. of Bits:	2
Length:	19.175 mm
Maximum Receive Delay:	10000 ns
Additional Features:	EXTERNAL CHARGE PUMP
Peak Reflow Temperature (C):	260
Terminal Pitch:	2.54 mm
Temperature Grade:	INDUSTRIAL
Power Supplies (V):	5

Category Top Products

MAX3485EESA

Maxim Integrated

MAX3485EESA by Maxim Integrated is a CMOS Line Transceiver with EIA-422 and EIA-485 interface standards. It operates at 3.3V, has 8 terminals, and offers differential output. With a max transmit delay of 35ns, it's ideal for industrial applications requiring fast data transmission over short distances.

MAX3232EIDRE4

Texas Instruments

The Texas Instruments MAX3232EIDRE4 is a Line Driver & Receiver with 16 terminals, operating at 3.3/5V. It features EIA-232-F, TIA-232-F, V.28 interface standards and Schmitt trigger input characteristics. Ideal for industrial applications requiring reliable data transmission over short distances with low power consumption.

SN65HVD1470DGSR

Texas Instruments

SN65HVD1470DGSR by Texas Instruments is a line driver/receiver with 10 terminals, operating at 3-3.6V. It features EIA-485 interface standard, differential output, and peak reflow temp of 260°C. Ideal for automotive applications due to its small outline package and Schmitt trigger input characteristics.

DS34LV86TMX/NOPB

National Semiconductor

LINE RECEIVER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 16; Package Code: SOP; Package Shape: RECTANGULAR;

ZIOL2401#W

Zentrum Mikroelektronik Dresden Ag

Line Driver or Receivers;

MAX3430ESA

Maxim Integrated

MAX3430ESA by Maxim Integrated is a Line Driver & Receiver with 3.63V max supply voltage, 1500ns max transmit delay, and 120ns max receive delay. Ideal for EIA-422, EIA-485, TIA-485 interfaces in industrial applications requiring differential output and Schmitt trigger input characteristics.

SN75176ADRG4

Texas Instruments

SN75176ADRG4 by Texas Instruments is a Line Driver & Receiver with 8 terminals, operating at 5V. It features a max transmit delay of 60ns and differential output. Ideal for V.11 and EIA-422-B interface standards in commercial temperature grade applications.

MAX3483EESA+T

Analog Devices

MAX3483EESA+T by Analog Devices is a line driver/receiver with 8 terminals, operating at 3-3.6V. It offers EIA-422/EIA-485 interface standards, differential output, and 1500ns max transmit delay. Ideal for industrial applications requiring reliable communication over short distances.

AM26LV31EIDR

Texas Instruments

AM26LV31EIDR by Texas Instruments is a 4-bit line driver with a max supply voltage of 3.6V. It is used in applications requiring EIA-422-B, TIA-422-B, and V.11 interface standards.

SN65HVD1176DR

Texas Instruments

SN65HVD1176DR by Texas Instruments is a Line Driver & Receiver with 5V supply voltage, 10ns max transmit delay, and EIA-485-A interface standard. Ideal for industrial applications requiring differential output and operating temperatures ranging from -40 to 85°C.

SN65HVD33DRG4

Texas Instruments

SN65HVD33DRG4 by Texas Instruments is a Line Driver & Receiver with 3.6V max supply voltage, 18ns max transmit delay, and 85°C max operating temperature. Ideal for EIA-422-B, TIA-422-B, EIA-485-A, TIA-485-A, V.11 interfaces in industrial applications requiring differential output and low power consumption.

MAX3232IDE4

Texas Instruments

MAX3232IDE4 by Texas Instruments is a Line Driver & Receiver with 16 terminals. It operates at 3.3/5V, has a max supply voltage of 3.6V, and offers inverted output polarity. Ideal for industrial applications requiring EIA-232-F, TIA-232-F, V.28 interface standard compliance with peak reflow temperature of 260°C.

SN65HVD10DRG4

Texas Instruments

SN65HVD10DRG4 by Texas Instruments is a Line Driver & Receiver with 3.6V max supply voltage, 16ns max transmit delay, and 8A max output low current. Ideal for industrial applications requiring EIA-485-A, TIA-485-A, or ISO 8482 interface standards in a compact small outline package.

MAX232DRG4

Texas Instruments

MAX232DRG4 by Texas Instruments is a Line Driver & Receiver with 2 functions, operating at 5V. It has a small outline package style and operates b/w 0-70°C. Ideal for EIA-232-F, TIA-232-F, V.28 interfaces in commercial applications.

AM26LV32EIRGYRG4

Texas Instruments

AM26LV32EIRGYRG4 by Texas Instruments is a 16-terminal line driver with 3.6V max supply voltage, operating at -40 to 85°C. It features EIA-422-B interface standard, differential Schmitt trigger input characteristics, and quad terminal position. Ideal for industrial applications requiring reliable signal transmission over short distances.

ISL3283EIHZ-T

Intersil

LINE RECEIVER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 6; Package Code: LSSOP; Package Shape: RECTANGULAR;

DS26C31TM/NOPB

Texas Instruments

DS26C31TM/NOPB by Texas Instruments is a 4-function line driver with 3-STATE output, EIA-422 interface standard, and CMOS technology. It operates at -40 to 85 °C with a supply voltage range of 4.5V to 5.5V, making it ideal for industrial applications requiring differential outputs in compact spaces.

SP3232EEN-L

Maxlinear

LINE TRANSCEIVER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 16; Package Code: SOP; Package Shape: RECTANGULAR;

P82B96DR

Texas Instruments

P82B96DR by Texas Instruments is a Line Transceiver with 2 functions, operating at -40 to 85 °C. It has a supply voltage range of 2-15 V and terminal pitch of 1.27 mm. Ideal for industrial applications requiring standard input characteristics and dual-terminal position in a small outline package style.

AM26C32IDR

Texas Instruments

AM26C32IDR by Texas Instruments is a 4-function line driver/receiver with 16 terminals. It operates b/w -40 to 85°C, with a supply voltage range of 4.5-5.5V and max output low current of 6A. Ideal for EIA-422-B/TIA-422-B interfaces in industrial applications requiring differential Schmitt trigger input characteristics.