Image shown is a representation only. Exact specifications should be obtained from the product data sheet.

All prices are in USD

Bulk

QTY	Unit Price	Ext Price
3,284	Request Pricing	-

SN65LBC176DRG4

Manufacturer

Texas Instruments
Manufacturer's Part Number

SN65LBC176DRG4
Description

LINE TRANSCEIVER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
Datasheet

Datasheet

3284 In Stock

Popular Products

DP83848IVVX/NOPB

Texas Instruments

Texas Instruments DP83848IVVX/NOPB is a 3.3V Ethernet transceiver with 100000 Mbps data rate, suitable for industrial applications. It features CMOS technology, operates b/w -40 to 85 °C, and comes in a low profile flatpack package with matte tin finish.

Details

SMBJ18CA

Fairchild Semiconductor

TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

BSS138NH6327XTSA2

Infineon Technologies

BSS138NH6327XTSA2 by Infineon is a N-CHANNEL FET with 60V DS Breakdown Voltage, ideal for small signal applications. Operating in Enhancement Mode, it has 0.36W Power Dissipation and 3.5 ohm Drain-Source Resistance. With Gull Wing terminals and AEC-Q101 reference standard, it's suitable for automotive electronics due to its high temperature range of -55 to 150 °C.

Details

M24308/2-1F

Esterline Technologies

D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Mounting Option-1: HOLE .115-.125; Mounting Type: CABLE AND PANEL; Mating Contact Finish: NOT SPECIFIED;

Details

1N4148

NXP Semiconductors

RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;

Details

BAV99

National Semiconductor

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

BSS138PS,115

Nexperia

N-CHANNEL; Configuration: SEPARATE, 2 ELEMENTS WITH BUILT-IN DIODE; Surface Mount: YES; No. of Elements: 2; No. of Terminals: 6; Minimum DS Breakdown Voltage: 60 V;

Details

DS18B20U+

Maxim Integrated

TEMPERATURE SENSOR,SWITCH/DIGITAL OUTPUT,SERIAL; Mounting Feature: SURFACE MOUNT; No. of Terminals: 8; Package Shape or Style: SQUARE; Housing: PLASTIC; Minimum Supply Voltage: 3 V;

Details

LM317TG

Texas Instruments

LM317TG by Texas Instruments is an adjustable positive single output standard regulator with a max output voltage of 37V and max output current of 1.5A. It operates in temperatures ranging from 0 to 125°C, making it suitable for various applications requiring precise voltage regulation in electronic circuits. The package style is flange mount, with a rectangular shape and through-hole terminals for easy installation.

Details

BSS138

Infineon Technologies

N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Maximum Drain Current (Abs) (ID): .2 A; Maximum Feedback Capacitance (Crss): 8 pF;

Details

1N4148W-7-F

Diodes Incorporated

1N4148W-7-F by Diodes Inc. is a single rectifier diode with 0.715V max forward voltage and 100V max reverse voltage. Ideal for applications requiring fast switching speeds, it has a small outline package style and matte tin terminal finish, making it suitable for surface mount PCB designs.

Details

M24308/2-1F

Souriau

D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Mating Info.: MULTIPLE MATING PARTS AVAILABLE; Body or Shell Style: RECEPTACLE; MIL Conformity: YES;

Details

BSS138

Micro Commercial Components

N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Package Shape: RECTANGULAR; Terminal Position: DUAL;

Details

LAN8720A-CP-TR

Microchip Technology

LAN8720A-CP-TR by Microchip: Ethernet transceiver with 100 Mbps data rate, operates at 3.3V, and consumes 54mA max supply current. Ideal for network interfaces in commercial applications due to its small size (4x4mm) and low power consumption.

Details

BSS138

North American Philips Discrete Products Div

N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; No. of Elements: 1; Maximum Drain Current (Abs) (ID): .2 A;

Details

2N7002

Philips Semiconductors

N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Moisture Sensitivity Level (MSL): 1; Maximum Operating Temperature: 150 Cel;

Details

LM358M

Onsemi

OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;

Details

C1206C104M5RACTU

KEMET Corporation

KEMET C1206C104M5RACTU is a ceramic capacitor with 0.1uF capacitance and 50V rated DC voltage. It has X7R temperature characteristics, -55 to 125°C operating range, and ±20% tolerance. Ideal for surface mount applications in electronics requiring stable capacitance across temperatures.

Details

LM107H/883

Rochester Electronics

OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Maximum Average Bias Current (IIB): .1 uA;

Details

2N2222A

Crystalonics

NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;

Details

SN65LBC176DRG4 Technical Details

TYPE	DESCRIPTION
Minimum Supply Voltage:	4.75 V
Package Body Material:	PLASTIC/EPOXY
Minimum Supply Voltage-1:	4.75 V
Nominal Supply Voltage:	5 V
Maximum Time At Peak Reflow Temperature (s):	NOT SPECIFIED
Maximum Seated Height:	1.75 mm
Minimum Out Swing:	1.1 V
Maximum High Level Input Current:	.0001 Amp
Sub-Category:	Line Driver or Receivers
Surface Mount:	YES
Maximum Supply Current:	1.5 mA
Terminal Finish:	Nickel/Palladium/Gold (Ni/Pd/Au)
No. of Terminals:	8
Terminal Position:	DUAL
Package Style (Meter):	SMALL OUTLINE
Technology:	BICMOS
JESD-30 Code:	R-PDSO-G8
Package Shape:	RECTANGULAR
Terminal Form:	GULL WING
Maximum Operating Temperature:	85 Cel
Package Code:	SOP
Interface Standard:	EIA-485-A; TIA-485-A; ISO 8482
Interface IC Type:	LINE TRANSCEIVER
Width:	3.9 mm
Nominal Supply Voltage-1:	5 V
Maximum Supply Voltage-1:	5.25 V
Maximum Output Low Current:	8 Amp
Moisture Sensitivity Level (MSL):	1
Input Characteristics:	DIFFERENTIAL SCHMITT TRIGGER
Driver No. of Bits:	1
Maximum Supply Voltage:	5.25 V
Differential Output:	YES
JESD-609 Code:	e4
Minimum Operating Temperature:	-40 Cel
No. of Functions:	1
Qualification:	Not Qualified
Maximum Transmit Delay:	25 ns
Package Equivalence Code:	SOP8,.25
Receiver No. of Bits:	1
Length:	4.9 mm
Maximum Receive Delay:	33 ns
Additional Features:	COMMON I/O: TRISTATABLE RECEIVER; 1 RECEIVER ACTIVE UNDER SHUTDOWN
Peak Reflow Temperature (C):	260
Terminal Pitch:	1.27 mm
Temperature Grade:	INDUSTRIAL
Power Supplies (V):	5

Category Top Products

FIN1108MTD

Onsemi

FIN1108MTD by Onsemi is a Line Transceiver with 8-bit driver and receiver functions. It operates at a supply voltage range of 3-3.6V, with max transmit and receive delays of 1.75ns. This industrial-grade device in a small outline package is ideal for applications requiring high-speed differential signal transmission.

DS26C32ATM/NOPB

National Semiconductor

LINE RECEIVER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 16; Package Code: SOP; Package Shape: RECTANGULAR;

MAX3232ECAE+T

Analog Devices

Analog Devices' MAX3232ECAE+T is a Line Driver & Receiver with 16 terminals, operating at 3-5.5V. It features BICMOS technology, EIA-232 interface standard, and Schmitt trigger input characteristics. Ideal for applications requiring reliable data transmission in commercial temperature range of 0-70°C.

ST232CDR

STMicroelectronics

ST232CDR by STMicroelectronics is a Line Driver & Receiver with 2 functions, operating at 5V. It has a max supply voltage of 5.5V and operates in temperatures ranging from 0 to 70°C. Ideal for EIA-232, TIA-232, V.28 interfaces in commercial applications.

DS90UB947TRGCRQ1

Texas Instruments

DS90UB947TRGCRQ1 by Texas Instruments is an AEC-Q100 compliant line driver with 64 terminals. It operates at -40 to 105 °C, with a supply voltage range of 1.71-1.89 V. This chip carrier has a compact size of 9x9 mm and is ideal for industrial applications requiring differential outputs.

SP330EEY-L

Maxlinear

LINE TRANSCEIVER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 24; Package Code: TSSOP; Package Shape: RECTANGULAR;

SN65HVD72D

Texas Instruments

SN65HVD72D by Texas Instruments is a line transceiver with 8 terminals, operating at 3.3V supply voltage. It features EIA-422 and EIA-485 interface standards, differential output, and a max transmit delay of 1000ns. Ideal for automotive applications due to its wide temperature range from -40°C to 125°C.

MAX3232ECDRE4

Texas Instruments

MAX3232ECDRE4 by Texas Instruments is a line driver and receiver with a max supply voltage of 3.6V. It has 2 functions and is used for EIA-232-F, TIA-232-F, and V.28 interface standards. Its small outline package style makes it suitable for various applications requiring inverted output polarity and Schmitt trigger input characteristics.

MAX232ACSE+T

Maxim Integrated

LINE TRANSCEIVER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 16; Package Code: SOP; Package Shape: RECTANGULAR;

MAX232ECDWR

Texas Instruments

MAX232ECDWR by Texas Instruments is a Line Driver & Receiver with 2 functions. It operates at 5V, has inverted output polarity, and uses Schmitt trigger input characteristics. Ideal for EIA-232-F, TIA-232-F, V.28 interfaces in commercial temperature grade applications.

AM26C32IDR

Texas Instruments

AM26C32IDR by Texas Instruments is a 4-function line driver/receiver with 16 terminals. It operates b/w -40 to 85°C, with a supply voltage range of 4.5-5.5V and max output low current of 6A. Ideal for EIA-422-B/TIA-422-B interfaces in industrial applications requiring differential Schmitt trigger input characteristics.

SP330EEY-L/TR

Exar

Exar SP330EEY-L/TR is a 24-terminal line driver/receiver with EIA-485, EIA-422, and EIA-232 interface standards. It operates b/w -40 to 85°C, supporting differential output and input characteristics using a 3.3V nominal voltage. Ideal for industrial applications requiring reliable communication over short distances.

DS26LV32ATM

National Semiconductor

LINE RECEIVER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 16; Package Code: SOP; Package Shape: RECTANGULAR;

ISO3082DW

Texas Instruments

ISO3082DW by Texas Instruments is a line driver/receiver with 16 terminals, operating at 3.15-5.5V. It offers differential output, EIA-422/EIA-485 interface standards, and Schmitt trigger input for industrial applications requiring fast transmission speeds and low power consumption.

SP485EEN-L/TR

Exar

Exar's SP485EEN-L/TR is a BICMOS line transceiver with EIA-485/EIA-422 interface standard. It operates at 5V, has 8 terminals, and offers differential output. With a small outline package style, it suits industrial applications requiring fast transmission speeds up to 60ns delay.

MAX233ACWP+TG36

Maxim Integrated

MAX233ACWP+TG36 by Maxim Integrated is a Line Driver & Receiver with 2 functions, operating at 5V. It has a max transmit delay of 3500ns and receiver with 2 bits. Ideal for EIA-232-E, TIA-232-E, V.24, V.28 interfaces in commercial temperature range applications.

ISO1432BDWR

Texas Instruments

ISO1432BDWR by Texas Instruments is a line driver & receiver with a plastic/epoxy package. It has a max supply voltage of 5.5V and operates in automotive temperature grade. This interface IC type is commonly used for EIA-485-A, TIA-485-A, and EIA-422 applications.

MAX485CSA+T

Analog Devices

MAX485CSA+T by Analog Devices is a line driver & receiver with a max supply voltage of 5.25V and a max transmit delay of 60ns. It is commonly used in EIA-422 and EIA-485 interface applications.

SN65HVD75DR

Texas Instruments

SN65HVD75DR by Texas Instruments is a line driver & receiver with 3.6V max supply voltage, 17ns max transmit delay, and 70ns max receive delay. Ideal for automotive applications due to its EIA-422/EIA-485 interface standard and differential output capability.

SN65HVD1470DGSR

Texas Instruments

SN65HVD1470DGSR by Texas Instruments is a line driver/receiver with 10 terminals, operating at 3-3.6V. It features EIA-485 interface standard, differential output, and peak reflow temp of 260°C. Ideal for automotive applications due to its small outline package and Schmitt trigger input characteristics.