Image shown is a representation only. Exact specifications should be obtained from the product data sheet.

All prices are in USD

Bulk

QTY	Unit Price	Ext Price
4,482	$2.888	$12,944.016

SN65HVD232DG4

Manufacturer

Texas Instruments
Manufacturer's Part Number

SN65HVD232DG4
Description

INTERFACE CIRCUIT; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
Datasheet

Datasheet

4482 In Stock

Popular Products

ABS07-32.768KHZ-T

Abracon

Abracon ABS07-32.768KHZ-T crystal oscillator offers 20 ppm frequency tolerance, 144% stability, and 70000 ohm series resistance. Ideal for applications requiring 0.032768 MHz frequency precision in a compact surface-mount design with gold over nickel finish.

Details

1N4148

Onsemi

RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;

Details

2N7002

Central Semiconductor

N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Maximum Drain Current (ID): .115 A; Maximum Drain Current (Abs) (ID): .115 A;

Details

LL4148

Temic Semiconductors

RECTIFIER DIODE; Terminal Position: END; Terminal Form: NO LEAD; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;

Details

LM358AN

NXP Semiconductors

OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;

Details

OPA2227UA

Texas Instruments

OPA2227UA by Texas Instruments is a dual operational amplifier with low-offset voltage of 200 uV and bias current of 0.01 uA. It operates at temperatures ranging from -40 to 85 °C, making it suitable for industrial applications requiring precise signal amplification. With a unity gain bandwidth of 8000 kHz, this op amp is ideal for high-frequency circuit designs.

Details

2N7002

Sipex

N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Peak Reflow Temperature (C): 240; Terminal Finish: TIN LEAD;

Details

RC0402FR-071KL

Yageo

The Yageo RC0402FR-071KL is a fixed resistor with a resistance of 1000 ohm and a tolerance of 1%. It is suitable for surface mount applications and has a max operating temperature of 155 °C.

Details

2N2222A

Surge Components

NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Collector Current (IC): .6 A; No. of Terminals: 3;

Details

LL4148

Silicon Standard

RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;

Details

RC0603FR-071KL

Yageo

Yageo's RC0603FR-071KL is a fixed resistor with 1000 ohm resistance, 1% tolerance, and 0.1 W power dissipation. Ideal for surface mount applications in electronics, it operates b/w -55 to 155 °C with a temperature coefficient of 100 ppm/°C.

Details

1554216002

Molex

WIRE AND CABLE;

Details

NDT2955

National Semiconductor

P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 3 W; JESD-609 Code: e0; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR;

Details

FT232RL-REEL

FTDI

FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.

Details

2N2222A

M/a-com Technology Solutions

NPN; Configuration: SINGLE; Surface Mount: NO; Maximum Collector Current (IC): .8 A; Terminal Position: BOTTOM; Package Style (Meter): CYLINDRICAL;

Details

M39029/58-360

Itt Cannon

CONNECTOR ACCESSORY; Alternate Contacts: 030-2042-000; DIN Conformity: NO; Contact Gender: MALE; Terminal Type: WIRE; MIL-Connector Accessory Name: CONTACT;

Details

ST3485EBDR

STMicroelectronics

ST3485EBDR by STMicroelectronics is a Line Driver & Receiver with 3.3V power supply, EIA-422/EIA-485 interface standard, and 30ns max transmit delay. It is ideal for industrial applications requiring differential output and operates in temperatures ranging from -40 to 85°C.

Details

LM317T

Texas Instruments

LM317T by Texas Instruments is an adjustable positive single output standard regulator with a max output voltage of 37V and max input-output voltage differential of 40V. Operating temperature ranges from 0 to 125°C, making it suitable for various applications requiring precise voltage regulation in electronic circuits. With a max output current of 1.5A, this through-hole package regulator is ideal for power supply designs where adjustable voltage levels are needed.

Details

LL4148

Sinyork

RECTIFIER DIODE; Surface Mount: YES; Config: SINGLE; No. of Phases: 1; No. of Elements: 1; Maximum Repetitive Peak Reverse Voltage: 100 V;

Details

BAV99

Temic Semiconductors

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

SN65HVD232DG4 Technical Details

TYPE	DESCRIPTION
Package Body Material:	PLASTIC/EPOXY
Nominal Supply Voltage:	3.3 V
Maximum Time At Peak Reflow Temperature (s):	NOT SPECIFIED
Maximum Seated Height:	1.75 mm
Sub-Category:	Network Interfaces
Surface Mount:	YES
Maximum Supply Current:	.017 mA
Terminal Finish:	Nickel/Palladium/Gold (Ni/Pd/Au)
No. of Terminals:	8
No. of Transceivers:	1
Terminal Position:	DUAL
Package Style (Meter):	SMALL OUTLINE
Data Rate:	1 Mbps
Technology:	BICMOS
JESD-30 Code:	R-PDSO-G8
Package Shape:	RECTANGULAR
Terminal Form:	GULL WING
Maximum Operating Temperature:	85 Cel
No. of Channels:	1
Package Code:	SOP
Width:	3.9 mm
Moisture Sensitivity Level (MSL):	1
Telecom IC Type:	INTERFACE CIRCUIT
JESD-609 Code:	e4
Minimum Operating Temperature:	-40 Cel
No. of Functions:	1
Qualification:	Not Qualified
Package Equivalence Code:	SOP8,.25
Length:	4.9 mm
Peak Reflow Temperature (C):	260
Terminal Pitch:	1.27 mm
Temperature Grade:	INDUSTRIAL
Power Supplies (V):	3.3

Category Top Products

MCP2542FDT-H/MF

Microchip Technology

MCP2542FDT-H/MF by Microchip is a CAN FD transceiver with 8 Mbps data rate, suitable for automotive applications. It operates at -40 to 150°C, with a supply voltage of 5V and max current of 140mA. The package is small outline, heat sink, very thin profile square shape with matte tin finish and dual terminals.

AR8033-AL1A-R

Qualcomm

Qualcomm's AR8033-AL1A-R is a network interface chip with 48 terminals and a square package shape. It operates at temperatures ranging from 0 to 70 °C and has a data rate of 1000 Mbps. This Ethernet transceiver is commonly used in commercial applications requiring high-speed networking capabilities.

DP83848KSQ/NOPB

Texas Instruments

DP83848KSQ/NOPB by Texas Instruments is a 3.3V Ethernet transceiver with 100000 Mbps data rate. It operates in industrial temperature range (-40 to 85 °C) and has AEC-Q100 screening level for automotive applications. This square-shaped chip carrier package has 40 terminals, 0.5mm pitch, and is surface mountable.

PCA82C250TD

NXP Semiconductors

PCA82C250TD by NXP Semiconductors is an 8-terminal interface circuit with a nominal voltage of 5V. It operates in automotive-grade temperature range from -40 to 125°C, suitable for network interfaces. The package style is small outline, surface mountable, with terminal finish in nickel palladium gold.

KSZ8895FQXCA

Microchip Technology

KSZ8895FQXCA by Microchip: Ethernet switch with 5 transceivers, 100 Mbps data rate. Operates at -40 to 85°C. Ideal for network interfaces in commercial applications.

TJA1055T/C,512

NXP Semiconductors

NXP Semiconductors' TJA1055T/C,512 is a Network Interface IC with 14 terminals in a small outline package. It operates at 5V nominal voltage and has a peak reflow temperature of 260°C. Ideal for telecom applications due to its interface circuit design and compact dimensions.

ADIN1300BCPZ

Analog Devices

ADIN1300BCPZ by Analog Devices is an Ethernet transceiver IC with 40 terminals in a square chip carrier package. Operating temperature range from -40 to 85°C, suitable for industrial use. Features include 1.8V supply voltage, 0.5mm terminal pitch, and matte tin finish for surface mount applications.

NCV7344AMW0R2G

Onsemi

NCV7344AMW0R2G by Onsemi is an AEC-Q100 compliant CAN FD transceiver with 5 Mbps data rate, suitable for automotive applications. It operates at temperatures ranging from -40 to 150°C and has a max supply current of 70 mA. This small outline package with dual terminals measures 3x3 mm and has a very thin profile.

TJA1028T/3V3/20/1J

NXP Semiconductors

NXP Semiconductors' TJA1028T/3V3/20/1J is a LIN transceiver with 8 terminals, operating voltage of 3.3V, and max supply current of 4.5mA. It has AEC-Q100 screening level for automotive applications, with temp range from -40 to 150°C. Package style is small outline, suitable for surface mount assembly in compact designs.

DP83865DVH/NOPB

Texas Instruments

DP83865DVH/NOPB by Texas Instruments is an Ethernet transceiver with a data rate of 1000 Mbps. It operates at temperatures from 0 to 70°C and has a supply voltage of 1.8V. This network interface IC comes in a rectangular package style, suitable for surface mount applications.

MAX33041EASA+

Maxim Integrated

CAN TRANSCEIVER; Peak Reflow Temperature (C): 260; Terminal Finish: MATTE TIN; Maximum Time At Peak Reflow Temperature (s): 30; JESD-609 Code: e3; Moisture Sensitivity Level (MSL): 1;

TJA1044GTK/3Z

NXP Semiconductors

NXP Semiconductors' TJA1044GTK/3Z is a CAN transceiver with 5 Mbps data rate, AEC-Q100 screening level, and 8 terminals. It operates b/w -40 to 150°C, ideal for automotive applications due to its small outline package and nickel palladium gold silver terminal finish.

TJA1057GTK

NXP Semiconductors

NXP Semiconductors' TJA1057GTK is an AEC-Q100 compliant interface circuit with 8 terminals, small outline package style, and 5V nominal voltage. It is designed for automotive applications requiring a compact form factor (3x3mm) and surface mount capability. The device offers reliable network connectivity in vehicles with its low profile design and dual terminal position.

TJA1057GTK/3

NXP Semiconductors

NXP Semiconductors' TJA1057GTK/3 is an AEC-Q100 compliant interface circuit with 8 terminals, small outline package style, and 5V nominal voltage. It is designed for automotive applications requiring a compact (3x3mm) surface-mount solution with dual terminal position.

TJA1027T/20,118

NXP Semiconductors

NXP Semiconductors' TJA1027T/20,118 is an AEC-Q100 compliant interface circuit with 8 terminals in a small outline package. It operates at a nominal voltage of 12V and has a peak reflow temperature of 260°C. Ideal for automotive applications requiring reliable network interfaces in compact designs.

TCAN1044AVDRBRQ1

Texas Instruments

TCAN1044AVDRBRQ1 by Texas Instruments is an AEC-Q100 compliant CAN FD transceiver with 8 Mbps data rate, operating at -40 to 150°C. It features a small outline package with 8 terminals and dual terminal position, suitable for automotive applications requiring high-speed communication in harsh environments.

TCAN1042HVDQ1

Texas Instruments

TCAN1042HVDQ1 by Texas Instruments is an Ethernet transceiver with 2 Mbps data rate, operating at -55 to 125°C. It features a small outline package with 8 terminals and supports a supply voltage of 5V. Ideal for military-grade applications requiring high-temperature resilience and reliable network interfaces.

ISO1042DWVR

Texas Instruments

ISO1042DWVR by Texas Instruments is a network interface IC with 8 terminals and a small outline package style. It operates at temperatures ranging from -40 to 125 °C and has a nominal voltage of 5V. This IC is commonly used in automotive applications for interface circuits.

DM9161EP

Davicom Semiconductor

DM9161EP by Davicom Semiconductor is a 48-terminal Ethernet transceiver with CMOS technology. It operates at a max temperature of 70°C and has a supply voltage of 3.3V. The package style is flatpack, low profile, fine pitch, making it suitable for network interface applications.

PCA82C250T

NXP Semiconductors

PCA82C250T by NXP Semiconductors is a network interface IC with 8 terminals, operating at 5V. It has a temperature range of -40 to 125°C, suitable for automotive applications. The small outline package is surface mountable and features a gull wing terminal form.