Image shown is a representation only. Exact specifications should be obtained from the product data sheet.

OPA2134UA

Manufacturer

Texas Instruments
Manufacturer's Part Number

OPA2134UA
Description

OPERATIONAL AMPLIFIER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
Datasheet

Datasheet

Not In Stock

Popular Products

U.FL-R-SMT-1(10)

Hirose Electric

U.FL-R-SMT-1(10) by Hirose Electric is a RF connector with 50 ohm impedance, 0.05 dB insertion loss, and 8 GHz operating frequency. Ideal for board mounting in commercial applications, it features gold termination finish, liquid crystal polymer insulator, and 200VAC dielectric voltage resistance.

Details

SN65HVD234DR

Texas Instruments

SN65HVD234DR by Texas Instruments is an 8-terminal interface circuit with a data rate of 1 Mbps. Operating temperature ranges from -40 to 125 °C, making it ideal for automotive applications. With a supply voltage of 3.3 V and low current draw of 6 mA, it's suitable for network interfaces in compact designs.

Details

1N4148WS

Rectron

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

NUP2105LT1G

Onsemi

NUP2105LT1G by Onsemi is a Transient Suppression Device with 350W power dissipation, 29.1V breakdown voltage, and 44V clamping voltage. Commonly used in electronic circuits for surge protection due to its bidirectional polarity and silicon diode element material.

Details

ULN2803A

Allegro MicroSystems

NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; Maximum Operating Temperature: 85 Cel; Terminal Form: THROUGH-HOLE;

Details

MMSZ5245BT1G

Onsemi

MMSZ5245BT1G by Onsemi is a Zener diode with 15V nominal reference voltage, 8.5mA test current, and 16 ohm dynamic impedance. It is used in applications requiring precise voltage regulation in a compact SMD package for temperatures ranging from -55 to 150°C.

Details

1N4148

Invensys Sensor Systems

RECTIFIER DIODE; Surface Mount: NO; No. of Phases: 1; Maximum Reverse Recovery Time: .004 us; Config: SINGLE; Maximum Repetitive Peak Reverse Voltage: 100 V;

Details

2N7002

Telcom Semiconductor

N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Maximum Operating Temperature: 150 Cel; JESD-609 Code: e0;

Details

SN65HVD230DR

Texas Instruments

SN65HVD230DR by Texas Instruments is a BICMOS technology interface circuit with 1Mbps data rate, suitable for industrial applications. It operates at 3.3V, has 8 terminals in a small outline package, and can withstand temperatures from -40 to 85°C.

Details

B340A-13-F

SPC TECHNOLOGY/ MULTICOMP

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

BAT54C-7-F

Diodes Incorporated

BAT54C-7-F by Diodes Inc. is a Schottky rectifier diode with common cathode, 2 elements, and max forward voltage of 0.24V. Ideal for applications requiring fast reverse recovery time of 0.005 us, such as in small outline packages for surface mount technology at temperatures ranging from -65 to 150°C.

Details

BAV99

Jiangsu Changjiang Electronics Technology

RECTIFIER DIODE; Surface Mount: YES; Maximum Forward Voltage (VF): .715 V; Maximum Operating Temperature: 150 Cel; Maximum Reverse Recovery Time: .006 us; Maximum Output Current: .2 A;

Details

SMBJ18CA

Daco Semiconductor

TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

FDD5614P

Onsemi

FDD5614P by Onsemi is a P-CHANNEL Power FET with 60V DS Breakdown Voltage, ideal for SWITCHING applications. It features 45A IDM and 0.1 ohm RDS(ON), operating in ENHANCEMENT MODE at up to 175°C. The PLASTIC/EPOXY package with GULL WING terminals ensures efficient heat dissipation and reliable performance.

Details

LL4148

Weitron Technology

RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;

Details

MC33269T-3.3G

Onsemi

MC33269T-3.3G by Onsemi is a fixed positive single output LDO regulator with a max output current of 0.8 A and a dropout voltage of 1.35 V. It is commonly used in applications that require stable voltage regulation, such as power supplies for electronic devices.

Details

CC0603KRX7R9BB103

Yageo

Yageo CC0603KRX7R9BB103 is a 0603 SMT ceramic capacitor with capacitance of 0.01uF and rated DC voltage of 50V. It has X7R temperature characteristics, -55 to 125°C operating range, and ±10% tolerance. Ideal for surface mount applications in electronics requiring stable capacitance across temperatures.

Details

LM317T

Fairchild Semiconductor

ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; Maximum Output Current-1: 1.5 A; No. of Outputs: 1; Qualification Status: Not Qualified;

Details

BSS138LT3G

Onsemi

BSS138LT3G by Onsemi is a N-CHANNEL FET with a min DS breakdown voltage of 50V. It is used for switching applications and has a max drain current of 0.2A and max drain-source on resistance of 3.5 ohm.

Details

1N4148

Surge Components

RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;

Details

OPA2134UA Technical Details

TYPE	DESCRIPTION
Package Body Material:	Plastic/Epoxy
Maximum Time At Peak Reflow Temperature (s):	30 s
Low-Bias:	Yes
Sub-Category:	Operational Amplifiers
Surface Mount:	Yes
Maximum Input Offset Voltage:	2000 uV
Technology:	BIPOLAR
Minimum Voltage Gain:	158489.319
Package Shape:	Rectangular
Terminal Form:	Gull Wing
Package Code:	SOP
Amplifier Type:	Operational Amplifier
Nominal Slow Rate:	20 V/us
Moisture Sensitivity Level (MSL):	3
Architecture:	Voltage Feedback
Packing Method:	Tube
Programmable Power:	No
Nominal Negative Supply Voltage (Vsup):	-15 V
Qualification:	No
Peak Reflow Temperature (C):	260 °C (500 °F)
Terminal Pitch:	0.05 in (1.27 mm)
Maximum Seated Height:	0.069 in (1.75 mm)
Frequency Compensation:	Yes
Maximum Supply Voltage Limit:	18 V
Maximum Bias Current (IIB) @25C:	100 pA
Maximum Supply Current:	10 mA
Terminal Finish:	Nickel Palladium Gold
No. of Terminals:	8
Minimum Slew Rate:	15 V/us
Nominal Unity Gain Bandwidth:	8 MHz
Terminal Position:	Dual
Package Style (Meter):	Small Outline
JESD-30 Code:	R-PDSO-G8
Low-Offset:	No
Maximum Operating Temperature:	85 °C (185 °F)
Width:	0.153 in (3.895 mm)
Nominal Common Mode Reject Ratio:	100 dB
Micropower:	No
JESD-609 Code:	e4
Minimum Operating Temperature:	-40 °C (-40 °F)
Maximum Average Bias Current (IIB):	100 pA
No. of Functions:	2
Minimum Common Mode Reject Ratio:	86 dB
Length:	0.193 in (4.905 mm)
Nominal Supply Voltage / Vsup (V):	15 V
Maximum Negative Supply Voltage Limit:	-18 V
Maximum Input Offset Current (IIO):	50 pA
Power:	No
Temperature Grade:	Industrial
Wideband:	No

Category Top Products

LM7321MFE/NOPB

Texas Instruments

LM7321MFE/NOPB by Texas Instruments is a voltage-feedback operational amplifier with 6000uV max input offset voltage, 80dB nominal CMRR, and 16000kHz unity gain bandwidth. Ideal for automotive applications due to its -40 to 125 °C operating temp range and compact small outline package style.

INA138NA/3K

Burr-Brown Corporation

OPERATIONAL AMPLIFIER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 5; Package Shape: RECTANGULAR; JESD-609 Code: e0;

OPA211AIDR

Texas Instruments

OPA211AIDR by Texas Instruments is a voltage-feedback operational amplifier with a max input offset voltage of 50 uV, max average bias current of 0.2 uA, and nominal common mode reject ratio of 120 dB. It is commonly used in automotive applications due to its low-offset and wideband capabilities.

LM324DR

ROHM

OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 14; Package Code: LSOP; Package Shape: RECTANGULAR;

OPA192IDGKR

Texas Instruments

OPA192IDGKR by Texas Instruments is an Operational Amplifier with low-offset and low-bias features. It has a max input offset voltage of 25uV, nominal unity gain bandwidth of 10MHz, and operates in automotive temperature grade. Ideal for precision applications requiring high common mode rejection ratio and low bias current consumption.

LM7321MF/NOPB

Texas Instruments

LM7321MF/NOPB by Texas Instruments is a 5-terminal Op Amp with 6000uV max input offset voltage, 1.5uA max average bias current, and 80dB nominal CMRR. Ideal for automotive applications due to its low profile design, it operates at -40 to 125 °C with a unity gain bandwidth of 16MHz.

LM324N

Onsemi

OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 14; Package Code: DIP; Package Shape: RECTANGULAR;

LM324N

Silicon Group

OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 14; Package Code: DIP; Package Shape: RECTANGULAR;

LM741CN

STMicroelectronics

OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;

OPA2210IDGKR

Texas Instruments

OPA2210IDGKR by Texas Instruments is an operational amplifier with a max input offset voltage of 35uV and nominal unity gain bandwidth of 18,000 kHz. It is ideal for automotive applications due to its small outline package style and wide operating temperature range from -40°C to 125°C. With low bias current and high common mode rejection ratio, it offers precise amplification in challenging environments.

LMC7101BIM5/NOPB

Texas Instruments

LMC7101BIM5/NOPB by Texas Instruments is a micropower operational amplifier with low-bias current and CMOS technology. It features a max input offset voltage of 9000 uV, nominal voltage of 3 V, and min slew rate of 0.4 V/us. Ideal for industrial applications requiring precise signal amplification in compact designs.

LM2904MX/NOPB

National Semiconductor

OPERATIONAL AMPLIFIER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;

AD8676ARMZ-REEL

Analog Devices

AD8676ARMZ-REEL by Analog Devices is a dual operational amplifier with low-offset and high common mode rejection ratio. It operates at a supply voltage of +-15V, offering a unity gain bandwidth of 10MHz. Ideal for automotive applications due to its compact size, low bias current, and wide temperature range.

LM258DR2

Onsemi

LM258DR2 by Onsemi is a dual operational amplifier with 85dB CMRR and 25000 min voltage gain. It operates at -25 to 85 °C, with max supply voltage of +-30V. Ideal for applications requiring high precision amplification in compact designs.

OPA2227UA/2K5E4

Texas Instruments

OPA2227UA/2K5E4 by Texas Instruments is a dual operational amplifier with low-offset and high common mode rejection ratio. It operates at a supply voltage of +-15V, has a unity gain bandwidth of 8MHz, and features a small outline package suitable for industrial applications.

LT6106HS5#TRPBF

Analog Devices

LT6106HS5#TRPBF by Analog Devices is a micropower operational amplifier with low-offset and wideband features. It operates at temperatures from -40 to 125 °C, with a bandwidth of 0.2 MHz. Ideal for automotive applications due to its small outline package and voltage-feedback architecture.

OPA2277UA/2K5E4

Texas Instruments

OPA2277UA/2K5E4 by Texas Instruments is a dual operational amplifier with low-offset and micropower features. It has a max input offset voltage of 100uV, nominal common mode reject ratio of 140dB, and min slew rate of 0.8V/us. Ideal for industrial applications requiring precise signal amplification in compact designs.

TL074CDT

STMicroelectronics

TL074CDT by STMicroelectronics is a quad operational amplifier with 4 functions. It has a max input offset voltage of 13000 uV and a min slew rate of 8 V/us. Ideal for applications requiring low-bias current, it operates at temperatures ranging from 0 to 70 °C and offers a nominal unity gain bandwidth of 3000 kHz.

OPA227UA

Texas Instruments

OPA227UA by Texas Instruments is a voltage-feedback operational amplifier with a max input offset voltage of 200 uV and a max average bias current of 0.01 uA. It is commonly used in industrial applications due to its low-offset, high common mode reject ratio, and wide temperature range.

OPA2171AIDGKR

Texas Instruments

OPA2171AIDGKR by Texas Instruments is a dual operational amplifier with a max input offset voltage of 2000 uV and a nominal voltage of +-18 V. With low-bias and micropower features, it is ideal for automotive applications requiring high precision and low power consumption. The amplifier's compact package style, small outline, and thin profile make it suitable for space-constrained designs in various electronic systems.