Image shown is a representation only. Exact specifications should be obtained from the product data sheet.

LM2904N

Manufacturer

Philips Semiconductors
Manufacturer's Part Number

LM2904N
Description

OPERATIONAL AMPLIFIER; Temperature Grade: AUTOMOTIVE; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
Datasheet

Datasheet

Not In Stock

Popular Products

LM555CM

National Semiconductor

PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;

Details

BSS138

Philips Semiconductors

N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Operating Mode: ENHANCEMENT MODE; Maximum Operating Temperature: 150 Cel;

Details

M24308/2-1F

TE Connectivity

TE Connectivity's M24308/2-1F D-Sub Connector features 9 contacts, 2 rows, and a shell size of 1/E. With a rated current of 7.5A, it operates b/w -55°C to 125°C. Ideal for cable mounting applications, this connector has a steel shell with cadmium finish and uses crimp termination for female contact pins.

Details

1N4148

Laube Technology

RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;

Details

2N7002

Taitron Components

N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Operating Mode: ENHANCEMENT MODE; Minimum DS Breakdown Voltage: 60 V; Package Shape: RECTANGULAR;

Details

BAV99

Vishay Telefunken

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

ST3485EBDR

STMicroelectronics

ST3485EBDR by STMicroelectronics is a Line Driver & Receiver with 3.3V power supply, EIA-422/EIA-485 interface standard, and 30ns max transmit delay. It is ideal for industrial applications requiring differential output and operates in temperatures ranging from -40 to 85°C.

Details

LL4148

Taiwan Semiconductor

RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;

Details

LFXTAL025159REEL

Iqd Frequency Products

LFXTAL025159REEL by IQD Frequency Products is a 32.768 kHz crystal oscillator with 20 ppm frequency tolerance and 40,000 ohm series resistance. It is ideal for applications requiring precise timekeeping, such as real-time clocks in IoT devices or microcontrollers in wearables. The surface-mount design with a drive level of 1 uW makes it suitable for compact electronic systems.

Details

1N4148

Hitachi

RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;

Details

ULN2803A

Motorola

NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; Terminal Position: DUAL; JESD-30 Code: R-PDIP-T18;

Details

LM7805CT

Comset Semiconductors

Other Regulators; No. of Terminals: 3; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 5 %; Operating Temperature (TJ-Min): 0 Cel; Technology: BIPOLAR;

Details

BAV99

Microsemi

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

MBR1560CT

General Instrument

MBR1560CT by General Instrument is a common cathode rectifier diode with a max forward voltage of 0.75V and max output current of 15A. It is used for efficiency applications, has a package shape of rectangular, and can operate in temperatures ranging from -65 to 150 °C.

Details

LM358N

Texas Instruments

LM358N by Texas Instruments is an operational amplifier with 2 functions, offering a max input offset voltage of 9000 uV and a nominal common mode reject ratio of 85 dB. Widely used in commercial applications, it operates at temperatures ranging from 0 to 70 °C and has a unity gain bandwidth of 1000 kHz.

Details

LL4148

Weitronic Enterprise

RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;

Details

1N4148

Lite-on Semiconductor

RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;

Details

LM358DR2G

Onsemi

LM358DR2G by Onsemi is a dual operational amplifier with 7000uV max input offset voltage and 70dB nominal CMRR. Ideal for applications requiring low bias current such as sensor interfaces, signal conditioning circuits, and audio amplifiers. Package style: Small Outline, Technology: Bipolar, Unity Gain Bandwidth: 1000 kHz.

Details

2N7002

Rectron

N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Operating Mode: ENHANCEMENT MODE; Maximum Operating Temperature: 150 Cel; Terminal Form: GULL WING;

Details

FSMLF327

Fox Electronics

FSMLF327 by Fox Electronics is a crystal oscillator with 20 ppm frequency tolerance, 144% stability, and 50000 ohm series resistance. Ideal for applications requiring precise timing such as communication systems, industrial automation, and consumer electronics. Operating temperature range from -40 to 85 °C.

Details

LM2904N Technical Details

TYPE	DESCRIPTION
Package Body Material:	Plastic/Epoxy
Frequency Compensation:	Yes
Maximum Supply Voltage Limit:	32 V
Maximum Bias Current (IIB) @25C:	250 nA
Sub-Category:	Operational Amplifiers
Maximum Supply Current:	1.2 mA
Surface Mount:	No
No. of Terminals:	8
Maximum Input Offset Voltage:	9000 uV
Nominal Unity Gain Bandwidth:	1 MHz
Terminal Position:	Dual
Package Style (Meter):	In Line
Technology:	BIPOLAR
JESD-30 Code:	R-PDIP-T8
Low-Offset:	No
Minimum Voltage Gain:	15000
Package Shape:	Rectangular
Terminal Form:	Through-Hole
Maximum Operating Temperature:	125 °C (257 °F)
Package Code:	DIP
Amplifier Type:	Operational Amplifier
Nominal Slow Rate:	0.3 V/us
Architecture:	Voltage Feedback
Packing Method:	Tube
Minimum Operating Temperature:	-40 °C (-40 °F)
No. of Functions:	2
Qualification:	No
Package Equivalence Code:	DIP8,.3
Terminal Pitch:	0.1 in (2.54 mm)
Temperature Grade:	Automotive
Power Supplies (V):	±1.5/±13/3/26 V

Category Top Products

OPA2350EA/2K5

Burr-Brown Corporation

OPERATIONAL AMPLIFIER; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Terminal Position: DUAL;

INA132UA/2K5E4

Texas Instruments

Texas Instruments' INA132UA/2K5E4 is an Operational Amplifier with 250uV Max Input Offset Voltage, 90dB CMRR, and -40 to 85°C Operating Temp. Ideal for applications requiring low-offset precision amplification in compact designs due to its small outline package and voltage-feedback architecture.

OPA2350UA

Texas Instruments

OPA2350UA by Texas Instruments is an Operational Amplifier with low-offset and low-bias features. It has a max input offset voltage of 500 uV, operates at a nominal voltage of 5V, and offers a min voltage gain of 100000. Ideal for industrial applications requiring precise signal amplification in compact designs.

LM7322MAX/NOPB

Texas Instruments

LM7322MAX/NOPB by Texas Instruments is a dual operational amplifier with 6000uV max input offset voltage and 1.5uA max average bias current. Ideal for automotive applications, it operates at -40 to 125 °C with a unity gain bandwidth of 16000 kHz. This small outline op amp features bipolar technology and offers high common mode rejection ratio of 80 dB.

OPA192IDBVR

Texas Instruments

OPA192IDBVR by Texas Instruments is a low-offset operational amplifier with 25uV max input offset voltage and 120dB nominal CMRR. Ideal for automotive applications, it operates at -40 to 125°C, features VFB architecture, and has a unity gain bandwidth of 10MHz.

LM7321MF

National Semiconductor

OPERATIONAL AMPLIFIER; Temperature Grade: AUTOMOTIVE; Terminal Form: GULL WING; No. of Terminals: 5; Package Code: TSSOP; Package Shape: RECTANGULAR;

OPA549TG3

Texas Instruments

OPA549TG3 by Texas Instruments is an operational amplifier (Op Amp) with a max input offset voltage of 5000 uV, a max average bias current of -0.5 uA, and a nominal voltage of 30 V. It is commonly used in industrial applications that require high voltage amplification and precise signal processing.

OPA547F

Texas Instruments

OPA547F by Texas Instruments is an Operational Amplifier with a max input offset voltage of 5000 uV, 95 dB nominal common mode reject ratio, and 100000 min voltage gain. It is used in industrial applications requiring precise signal amplification and temperature stability.

OPA4227UA/2K5

Burr-Brown Corporation

OPERATIONAL AMPLIFIER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 14; Package Code: SOP; Package Shape: RECTANGULAR;

OPA4197IPWR

Texas Instruments

OPA4197IPWR by Texas Instruments is a 4-function operational amplifier with a max input offset voltage of 500uV and nominal unity gain bandwidth of 10,000 kHz. It operates at temperatures ranging from -40 to 125 °C and is suitable for automotive applications due to its small outline package style and low bias current.

INA260AIPW

Texas Instruments

Texas Instruments' INA260AIPW is an operational amplifier with 16 terminals and a supply voltage of 3.3V, suitable for automotive applications. It offers a max input offset voltage of 5uV, common mode voltage of 36V, and unity gain bandwidth of 3.5kHz. With a compact rectangular package style and surface mount capability, it ensures high performance in tight spaces at temperatures ranging from -40 to 125°C.

LM324AN

Philips Semiconductors

OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 14; Package Code: DIP; Package Shape: RECTANGULAR;

OPA2228UA

Texas Instruments

OPA2228UA by Texas Instruments is an operational amplifier with a max input offset voltage of 200uV and low-offset feature. With a nominal voltage of +/-15V, it offers a min voltage gain of 3.98M and unity gain bandwidth of 33MHz. Ideal for industrial applications requiring precise signal amplification in compact designs.

LM2902DT

STMicroelectronics

LM2902DT by STMicroelectronics is a quad operational amplifier with 4 functions. It has a max input offset voltage of 9000 uV and nominal common mode reject ratio of 80 dB. Widely used in automotive applications due to its micropower technology and temperature grade, it operates at temperatures ranging from -40 to 125 °C.

TL074CD

Texas Instruments

TL074CD by Texas Instruments is a quad operational amplifier with 4 functions. It features a max input offset voltage of 13000 uV, low bias current of 0.007 uA, and nominal common mode reject ratio of 100 dB. Ideal for applications requiring precise signal amplification in commercial temperature environments.

LM741J/883

Texas Instruments

LM741J/883 by Texas Instruments is a MIL-STD-883 compliant operational amplifier with 6000uV max input offset voltage, 1.5uA max average bias current, and 90dB nominal CMRR. Widely used in military applications due to its VOLTAGE-FEEDBACK architecture, it offers a unity gain bandwidth of 250kHz and operates within -55 to 125 °C temperature range.

LM741CMWC

Rochester Electronics

OPERATIONAL AMPLIFIER; Terminal Form: NO LEAD; Package Code: DIE; Package Shape: UNSPECIFIED; Maximum Time At Peak Reflow Temperature (s): NOT SPECIFIED; Surface Mount: YES;

INA200AIDGKR

Texas Instruments

Texas Instruments' INA200AIDGKR is an operational amplifier with a max input offset voltage of 2500uV and a max average bias current of 16uA. This IC, suitable for automotive applications, features a nominal voltage of 12V and a common mode voltage up to 80V. With a response time of 1300ns, it operates in temperatures ranging from -40°C to 125°C.

LM2904N

Philips Semiconductors

OPERATIONAL AMPLIFIER; Temperature Grade: AUTOMOTIVE; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;

LM324DTBR2G

Onsemi

LM324DTBR2G by Onsemi is a quad operational amplifier with 4 functions. It has a max input offset voltage of 7000 uV and a nominal voltage of 5V, suitable for applications requiring high common mode rejection ratio. With low bias current and micropower technology, it is ideal for precision signal processing in commercial-grade temperature environments.